Availability
Showing In Stock Items. Show All 42 Items.
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$76.35
—
$82.45
$41.99
—
$45.35
On Sale
Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.
( 105 )
$37.43
$20.59
On Sale
The chrome plating of these Mr. Gasket gas lines dresses up your engine bay, along with providing an excellent trail for your fuel to travel along. They're made of steel tubing, brass fittings, and silver-brazed connections. The hex fittings provide ample space for tightening to ensure a quick installation.
( 64 )
$73.79
$47.96
On Sale
Holley offers air conditioner compressor manifolds in a variety of styles and finishes. These replacement line adapters are machined from aluminum or copper and will facilitate your A/C compressor hookup. Mounting hardware is included. Applications include vehicles with a GM LS engine.
( 8 )
$42.44
$23.34
On Sale
Don't change your hoses, just select the right adapter, and screw it in! Fluidyne High Performance hose barb to AN O-ring adapter fittings are specifically designed to work with Fluidyne LS swap and other MFC-style radiators. These screw-in fittings can also be used with any ORB port fitting of the proper size. Fluidyne hose barb to AN O-ring adapter fittings are available in 1.25 in., 1.50 in., 1.75 in., 16AN Male, and 20AN Male; select fittings based on your cooling system design.
Not Yet Reviewed
$25.00
$22.50
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.
( 167 )
$33.60
—
$64.95
$20.59
—
$35.72
On Sale
Fragola Performance Systems Series 8600-8700 Parker Push-Lok hose is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker's products. A synthetic rubber tube is covered with one layer of textile braid, combined with an outer layer of synthetic rubber in a choice of colors. Series 8600-8700 hose performs well when used within the temperature and pressure parameters that it was designed for: 250 psi maximum pressure for most oil, water, and fuel applications; with a –40 degrees F to +212 degrees F temperature range. Sized in fractions, it may be used with any push-on style fitting. Series 8000 Push-Lite race hose ends work especially well with Fragola Performance Systems Series 8600-8700 Parker Push-Lok hose.
( 61 )
$22.99
—
$60.99
$20.69
—
$54.89
On Sale
Holley weld-on fill cap kits include a cap CNC-machined from 6061-T6 billet aluminum with a bright, black anodized finish for great looks and corrosion protection. They're available with aluminum or steel weld bungs to match your application. Holley weld-on fill cap kit features include: * Allows for installation of a fill cap or inspection plug anywhere needed * Caps feature a laser-etched "Holley Equipped" logo * Easy-to-grip screw-on cap with O-ring seal and a 1.38 in. diameter opening * 1.950 in. O.D. / 1.400 in. I.D. weld bung * 1.810 in. diameter at the step of weld bung * 0.675 in. weld bung overall height * 0.570 in. height at the step of weld bung * 1 1/2-12 in. thread
( 2 )
$56.19
$30.90
On Sale
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride down the strip or around the track. Fragola Performance Systems offers high performance Pro Stock fuel line kits for Demon and Holley carburetors. These premium fuel line kits use strong braided stainless steel crimped P.T.F.E. hose assemblies and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola swaged smooth bore P.T.F.E. hose is reinforced with a tightly woven covering, making it a natural for high-pressure fuel lines. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 37 )
$34.99
—
$59.99
$31.49
—
$53.99
On Sale
When replacing your brake lines, or plumbing a new brake system, use Fragola Performance Systems brake adapters to complete the job properly. These brake adapters are manufactured from high-quality steel machined to mil spec tolerances and zinc coated for durable, tight connections. No matter what the job--connecting PTFE-lined hose to calipers, wheel cylinders, or hard lines, or just replacing leaky banjo bolts--Fragola brake adapters offer easy, secure installation, even where space is tight. Plumb with the best--Fragola Performance Systems.
( 107 )
$22.99
$20.69
On Sale
Hose ends may look like simple devices, but Fragola Performance Systems takes them very seriously. Fragola has spent several years researching, testing, and re-testing them to perfect the production of these Series 3000 race hose ends. Features include: * Unique one-piece design eliminates two brazed joints, minimizing potential leakage and improving flow and appearance * Two Viton® O-rings form a redundant seal to ensure no-leak service for the life of the part and they are impervious to fuel, oil, and coolant * Stainless steel lock wires to prevent galling and provide long service * Wider wrenching surface for no-slip installation * Tapered nipple for easy alignment and installation * J gauge threads for increased strength and durability * Bright-dipped anodizing for a show-quality finish * Improved entry angle on the socket for easy installation * Hose ends are manufactured from aerospace-quality aluminum and machined to mil spec tolerances
( 47 )
$22.99
—
$42.99
$20.69
—
$38.69
On Sale
Durable enough for competition and attractive enough for show, these Mr. Gasket chrome plated fuel lines are mandrel-bent for maximum fuel flow. They're designed specifically for use with Demon Carburetion Speed and Road Demon carbs. They include the necessary fittings, and are available with or without a 0 to 15 psi fuel gauge.
( 4 )
$84.49
$46.47
On Sale
Mr. Gasket black nylon braided AN hose features a special fluoroelastomer inner liner and are lighter weight than traditional stainless braided hoses. The hose is designed for use with Mr. Gasket swivel, Earl's swivel-seal, or Earl's auto-fit hose ends. Order the hose application suited to fit your needs.
( 1 )
$52.75
—
$90.09
$29.01
—
$49.55
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 22 )
$53.29
$29.31
On Sale
Scott Drake heater hoses are high-quality replacements available with or without a colored accent stripe. They also offer show-quality, original-style striped ribbed hoses. Some kits also include post-type band clamps. The hoses are available in different materials and configurations. When you need basic replacement heater hoses for your classic, look no further than Scott Drake.
( 5 )
$53.95
$29.67
On Sale
When you're plumbing brake lines, gauges, power steering, or air conditioning with durable PTFE stainless braided hose from Fragola, you need hose ends that will do the job just as well. These reusable hose ends feature a miniature "olive" that retains the hose inside of the fitting. By replacing the olive, Fragola Performance Systems PTFE hose ends can be used over and over again. PTFE hose ends are available in zinc coated steel and anodized aluminum in a surplus of sizes, styles, and angles to fit just about any application. Plumb with the best--Fragola Performance Systems PTFE hose ends.
( 20 )
$28.99
—
$42.99
$26.09
—
$38.69
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose ends. Each component is precision-machined to exacting tolerances for trouble-free performance. The nipple-and-cutter design that Earl's uses on their hose ends has been aerospace-proven for more than 40 years.
( 49 )
$37.43
$20.59
On Sale
Fragola Performance Systems Series 8000 Push-Lite race hose ends feature a unique one-piece design that eliminates two brazed joints, minimizing potential leakage and improving flow and appearance. The correct AN-specified J-thread is used for ease of installation and trouble-free re-use. A lightweight polymer cap provides positive stop for hose installation and covers the cut end of the hose. Hose barb dimensions are per SAE standards and they have a tapered nipple for easy alignment and installation. Their bright-dip anodizing provides a show-quality finish. Fragola Performance Systems Series 8000 Push-Lite hose ends are manufactured from aerospace-quality aluminum and machined to mil spec tolerances.
( 245 )
$28.99
$26.09
On Sale
Earl's Performance adapters are available in anodized aluminum and zinc plated steel. Precision-machined to exacting tolerances for trouble-free performance, they allow you to connect AN and NPT fittings together quickly and easily.
( 141 )
$39.22
—
$66.55
$21.57
—
$36.60
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters. To the people at Fragola, engineering has great value, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems swivel adapter fittings are manufactured from aerospace-quality aluminum to exacting standards for tight, leak-free connections and then anodized for added durability. These American-made swivel adapter fittings are available in varying sizes to fit nearly any application. Plumb with precision fittings from Fragola Performance Systems.
( 53 )
$26.99
—
$27.99
$24.29
—
$25.19
On Sale
Fragola Performance Systems Y-fittings provide a smoother flow path and less weight than comparable Y-blocks and fittings. They are machined from billet aluminum and are anodized for maximum protection against any type of fuel or fuel additives. The Y-fittings are available in different AN sizes to suit your fuel system's needs and offer male threaded connections on all three sides.
( 3 )
$23.99
—
$28.99
$21.59
—
$26.09
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters available. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems tee adapter fittings are manufactured from anodized aluminum or zinc finished steel to exacting standards for tight, leak-free connections. These tee adapter fittings are available in varying sizes to fit nearly any application, and most are produced right here in the USA. Plumb your racer like a pro with Fragola tee adapter fittings.
( 34 )
$23.99
—
$36.99
$21.59
—
$33.29
On Sale
Earl's Speed-Seal hose ends are reusable and have a proven record of reliability throughout the racing industry. Because brake system hose ends are subject to wear and tear from extreme vibration, these forged hose ends have an 80 percent greater wall thickness than any other on the market. These Speed-Seal hose ends are available in stainless steel or aluminum, bent tube or low-profile, and adjustable or non-adjustable configurations. They're made for use with Speed-Flex smooth bore hoses.
( 35 )
$51.69
$33.60
On Sale
Earl's lightweight UltraPro hose ends are designed to withstand harsh environments, brutal vibration, high-flow requirements, and extreme pressures! Their offered selection features Dynamic Swivel technology that allows for 360 degrees of rotation of installed line after installation, furnace-brazed bent tubes for a permanent and robust bond, as well as twist-on and crimp-on styles to provide you with more plumbing options at home and the track. Their high-stress components are constructed from high-strength 2024-T8 aluminum and receive Earl's popular Ano-Tuff black hard coat anodizing for extreme durability. Plus, they are fitted with rugged fluoroelastomer internal seals, which are chemically resistant to all known fuels, oils, and coolants. Whether you go with straight or bent, swivel or non-swivel, twist or crimp, Earl's UltraPro hose ends will deliver winning performance and looks.
( 26 )
$36.59
—
$44.22
$20.12
—
$24.32
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
