Availability
Showing In Stock Items. Show All 18 Items.
Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.
( 10 )
$54.99
—
$58.99
This SAE 30R7 rated Summit Racing™ braided nylon hose is designed for use with gas, oil, diesel, and other fluid applications. It uses a higher grade nitrile inner core that is specifically compounded to hold a higher fuel resistance than any other nylon hose product on the market. It can handle heat levels up to 275 degrees F and a maximum working pressure of 350 psi. Summit Racing™ braided nylon hose is lightweight and flexible. These features, combined with its ease of assembly, make it the fastest growing choice of hose products for racing and performance enthusiasts.
( 189 )
$50.99
—
$93.99
These Summit Racing™ dual feed fuel lines are a great addition to any fuel system. The pre-assembled fuel lines clean up your engine compartment and properly deliver fuel to your carburetor. Available in multiple sizes and styles to suit your needs.
( 448 )
$65.99
—
$68.99
Summit Racing™ Premium reinforced rubber hoses offer the perfect choice for all your performance fuel, oil, and water fluid transfer needs. Today, the paraffins and additives found in commercial- and performance-bought fuels and oils have become too much for old school conventional rubber hose, causing premature deterioration. Our Summit™ Premium reinforced rubber hoses consist of a multi-layer wall, preventing fuel infiltration from within the hose or evaporating into the atmosphere, as well as offering high resistance to heat and providing superior fluid flow to effectively eliminate premature failure. Available in several diameters and lengths, these synthetic twined reinforced hoses will stand up to the most corrosive additives found in the market today. They are SAE J30R9 rated and safe to use with alcohol, methanol, E85, E97, water, coolant, and oil. Select the size(s) needed for your project.
( 4 )
$54.99
—
$61.99
Looking for a cool way to dress up your engine compartment? Check out our vast assortment of Summit Racing™ hose fittings. They're available in chrome plated steel, brass, stainless steel, or anodized aluminum versions. As with all Summit Racing™ parts, the fittings are designed to provide quality and a proper fit. They are available in a wide range of sizes, angles, finishes, styles, and attachment options.
( 387 )
$52.99
Summit Racing™ copper/nickel alloy tubing offers several benefits when fabricating lines. They provide the strength of steel, yet they are more flexible allowing you to bend and form lines easier, and they are more corrosion-resistant. Make perfect bends and flares to fit your brake system, fuel system, or whatever you're plumbing with Summit Racing™ copper/nickel alloy tubing. They are available as 25 ft. length coils in several diameters.
( 4 )
$55.99
When our guys found this high-quality hose at such a good price, we thought they were trying to put one over on us. Luckily for you, this hose is just as good as the expensive stuff, without the big bill. Summit Racing™ stainless steel hose consists of a CPE (Chlorinated Polyethylene) inner tube with a partial stainless steel reinforcement inner braid. On top of that, we add a heavy-duty, protective, full stainless steel braid on the outside, making it exceptionally lightweight, flexible, and durable. Even better, our hose is designed to handle gasoline, oil, or coolant.
( 541 )
$69.99
Our Summit Racing™ Twist-Tite hose was designed for reduced weight, increased flexibility, and, best of all, affordability. The hose features an elastomer inner tube bonded with a reinforced textile braid, and covered in high-temperature synthetic rubber. The hose is compatible with a wide variety of fluids and is good to 250 psi when used with our Twist-Tite fittings. The red and blue anodized fittings install without tools--they simply Twist-Tite.
( 50 )
$50.99
—
$56.99
Summit Racing™ fuel lines are a great addition to any fuel system. They include all necessary hardware for an easy installation on your Edelbrock, Holley, Carter, or Summit carburetor. Available in multiple styles to suit your needs.
( 261 )
$53.99
—
$54.99
Summit Racing™ PTFE hose is high-quality hose at a great price. Designed to transfer fluids and fuels in the most demanding conditions, they deliver smooth, non-stick inner cores wrapped in heavy-duty 304 stainless steel braids. Our hose offers light weight strength and flexibility without breaking down—and durability for a long service life. PTFE hose is available in a variety of lengths, diameters, and PSI ratings. Meet the needs of your vehicle and your wallet with quality-priced Summit Racing™ PTFE hose.
( 182 )
$54.99
—
$57.99
These Summit Racing™ radiator hose adapter kits are designed to install a smaller sized radiator hose onto a larger sized radiator hose outlet.
( 53 )
$54.99
Give your brakes an extra boost of stopping power with Summit Racing™ brake hose sets! These hoses are made of top-quality material and are available for a variety of front and rear brake applications.
( 80 )
$57.99
Summit Racing™ one-way check valves are designed to prevent the back flow of any fuel, coolant, or oils. Their flapper design provides minimal flow restriction, and the high-quality construction of these valves ensures long-lasting performance. Their PTFE flapper requires a low 2 psi to lift off of the seat and is resistant to alcohol, methanol, and bio-diesel fuels. These check valves are offered in a choice of sizes to suit your needs.
( 31 )
$50.99
—
$54.99
Summit Racing™ offers vacuum connectors in a dozen sizes. These straight and tee style plastic fittings feature easy hose barb attachment. Each kit contains 113 total pieces.
Not Yet Reviewed
$52.99
Installing an aftermarket fuel pump? Make the job a lot easier with our Summit Racing™ aftermarket pump to carburetor fuel line kits. They include all of the fuel pump fittings, braided hose, braided hose ends, and carb fittings you need to get the job done.
( 98 )
$50.99
—
$51.99
Our Summit Racing™ stainless steel flexible hoses bend and cut easily, are non-corrosive, and dissipate heat better than rubber hoses. These hoses are available with standard rubber ends or with polished aluminum covers. Stainless steel clamps and reducer inserts are included.
( 243 )
$66.99
—
$100.99
Summit Racing™ PTFE stainless steel braided hoses are high-quality hoses at a great price. Designed to withstand a variety of fluids and fuels without breaking down over time like rubber based hoses. They deliver a smooth, non-stick PTFE inner core wrapped in heavy-duty 304 stainless steel braid. These hoses are light weight, high strength, and flexible. They are available in a variety of lengths, diameters, and colors. Meet the needs of your vehicle and your wallet with our Summit Racing™ PTFE hoses.
Not Yet Reviewed
$52.99
Summit Racing™ PTFE nylon braided hoses are high-quality hoses at a great price. Designed to withstand a variety of fluids and fuels without breaking down over time like rubber based hoses. They deliver a smooth, non-stick PTFE inner core wrapped in heavy-duty 304 stainless steel and finished with a nylon outer braid. These hoses are light weight, high strength, and flexible. They are available in a variety of lengths, diameters, and colors. Meet the needs of your vehicle and your wallet with our Summit Racing™ PTFE nylon braided hoses.
Not Yet Reviewed
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
