Availability
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 67 )
$999.99
Continental fuel injection hose is designed especially for fuel injected vehicles. The blue Fluorelastomer nitrile tube is specially compounded to resist gasoline, oil, diesel, and other fuels, while the high-strength synthetic textile reinforcement brings minimum burst to 900 psi. Continental fuel injection hose meets SAE specification J30R9.
( 27 )
$827.99
—
$1,009.99
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$849.95
$763.95
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$847.70
—
$881.65
$762.93
—
$793.48
Level 7 Motorsports Pro Series 1973-87 C10 chassis brake plumbing kits were developed specifically for the popular Pro Touring Chevy C10 trucks, and designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look to your classic vehicle. The lines in Level 7 Pro kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they are covered with a special PVC coated material for maximum durability against debris and abrasion. All Pro Series hoses use stainless steel hose ends for many years of corrosion resistance and durability, and they are all DOT approved and crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Additional details: * DOT-approved hose kit to plumb your factory 1973-87 C10 chassis * Can use stock front and rear brake hoses * -3 AN adapters included * PTFE hoses, stainless reinforced, and silicone coated * Black in color
Not Yet Reviewed
$774.99
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
$943.95
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant non-pro hoses: Fragola Race-Rite! Features and specs: * Smoothbore conductive PTFE core is resistant to fuel permeation * 60 percent lighter than their 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
( 3 )
$844.99
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 38 )
$759.99
—
$1,099.99
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 82 )
$815.99
—
$999.99
Too many varying types of hoses under the hood? Fragola Performance Systems Race-Rite PRO hose is designed to be compatible with all pumped fluids, and capable of tight bend radiuses, as well as higher flow rates. It features an enlarged inner diameter with a smoothbore conductive PTFE core that utilizes a convoluted exterior and black aramid braid cover. This hose is available in multiple sizes and lengths to properly fit your application. Enjoy the simplicity of the ultimate fuel, ATF (automatic transmission fluid), and coolant pro hoses: Fragola Race-Rite PRO. Features and specs: * Ideal in dry sump or high vacuum applications * Convoluted exterior with added spiral wire increases hoop strength to prevent hose sucking shut under high vacuum * Added externally wound, spiral wire increases flexibility and bend radius * Smoothbore conductive PTFE core is resistant to fuel permeation * 50 percent lighter than Fragola's 8400 Series black nylon race hose * True-to-size I.D. for improved flow rate * Works with all fluids, including ethanol-type fuels, ATF, coolant, and oils * Operating range -65 degrees to 500 degrees F * Ideal for use with Race-Rite crimp-on hose ends
Not Yet Reviewed
$795.99
—
$1,044.99
On Sale
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$751.95
—
$821.95
More tolerant, more efficient, and 100 percent silicone—Mishimoto radiator hose kits offer a boost of performance and looks under your hood! Combining high-grade silicone and heat-resistant embedded fibers, Mishimoto hoses provide exceptional heat reduction, increased pressure tolerance, and a whole lot of satisfaction. Radiator hose kits are available for a wide range of makes and models in black, blue, red, and limited-edition orange (specific makes only) to enhance the appearance of your engine bay. Some models also include hose clamps. Upgrade the performance and style of your vehicle with superior Mishimoto radiator hose kits.
( 77 )
$752.95
Made from special EPDM rubber, Continental OE Technology Series hoses last 5 to 10 times longer than regular hoses. Designed for heater hose applications that endure higher underhood temperatures and require a higher heater resistance. 2-Spiral Aramid reinforcing sleeve gives the hose a burst rating 10 times stronger than rayon-reinforced hose.
( 13 )
$925.99
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 9 )
$750.99
—
$832.99
On Sale
Aeromotive SS fuel pump kits provide everything you need to completely install a fuel system on your street rod, muscle car, or Pro Street vehicle. Universal kits are ideal if a system for your specific application does not yet exist—or you already have a sumped tank or fuel cell. These kits include fuel pump, two billet fuel filters, braided lines, hose ends, fittings, wiring, a relay, and all hardware to install the systems on virtually any car. They support a wide range of performance, from 250 to over 2,000 hp, for both fuel injected and carbureted applications. Whether you have a street car, race car, or boat, Aeromotive SS fuel pump kits are the right choice. Kit contains: * Fuel pump * Fuel pump wiring kit * 2 fuel filters * 20 ft. -8 AN stainless steel braided line * 2 each -8 AN straight hose ends * 2 each -8 AN 90-degree hose ends * 2 each 3/8-NPT hex nipples * 2 each 3/8-NPT to -08 AN fittings * 12 tie-wraps
Not Yet Reviewed
$1,037.10
$933.39
DeatschWerks X2 Series fuel pump plumbing kits contain all the items you need for the proper install of your X2 pump module—and nothing you don't. DW packages a hard anodized regulator to deliver stable air-to-fuel ratios for optimal performance, a precision fuel pressure gauge, a filter with a meticulously engineered stainless steel element, fittings, and braided stainless steel fuel line that's either PTFE or CPE lined—your choice. Choose the DeatschWerks X2 Series fuel pump plumbing kit best suited for your application.
Not Yet Reviewed
$799.00
—
$949.00
Top racing teams depend on Earl's Perform-O-Flex hose. It features an inner liner of Temprel synthetic rubber, a partial-coverage protective sheath of stainless steel braid embedded in the liner during manufacturing, and a full-coverage outer protective sheath of high-tensile stainless steel wire braid. It can withstand an operating temperature range of -40 degrees F to +300 degrees F, and still deliver you to the winner's circle. Perform-O-Flex hose is compatible with most fuel, oil, and water; and it's available in a wide variety of AN sizes, lengths, and diameters.
( 2 )
$849.95
On Sale
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$799.95
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$875.95
—
$924.95
Fleece Performance offers dual pump hardware kits for a variety of diesel trucks. Kits include all the components you need to begin the build of a custom Dual CP3 Fuel System on your 5.9L or 6.7L Cummins engine application. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most of your aftermarket tuning, injectors, and other upgrades. Combine one of these Fleece hardware kits with a CP3 pump, spoked or solid pulley, Fleece fuel distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately). Kit contents: * Cummins common rail Dual CP3 bracket * Cummins heavy-duty dual pump belt * Fan shroud bracket * Dual pump pulley – idler * Cummins dual pump idler pulley spacer * Cummins dual pump controller * High-pressure dual pump line (CP3 to CP3) * High-pressure CP3 fitting and non-return valve * (6) M8 x 1.25 flange nuts * (6) M8 x 1.25 × 50 carriage bolts * M10 x 1.5 x 40mm flange head cap screw * M8 × 1.25 flange head cap screw * M18 x 1.5 CP3 nut Features: * Easy install kit * Exclusive pump to pump line * Increased engine performance
( 1 )
$780.00
Level 7 Motorsports' Pro Series brake plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used * Optional rear whip hose bracket is available for use with rear mounted fuel tanks (factory bracket will interfere with whip hose if using a rear mounted tank) Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$769.99
—
$801.99
Gotta Show Products A/C hose kits are the real deal when it comes to plumbing the air conditioning system in your hot rod, classic, truck, or custom build. They deliver 100 percent stainless steel construction—not plated—and are ready to polish. All fittings are female O-ring formed, making them compatible with any aftermarket A/C system. These cut-to-fit kits may include hoses, drier fittings, condenser fittings, and bulkhead or evaporator fittings. From the firewall forward, complete your A/C system with Gotta Show hose kits.
( 1 )
$752.99
—
$848.99
Redhorse Performance 235 Series black nylon braided hose will keep pace with your racing whether you are using e85, methanol, or regular fuel from the pump. This top-of-the-line nylon braided hose with single stainless steel under-braid features a unique dual layer inner tube, with a layer of Epichlorohydrin (ECO) and a layer of Fluoroelastomer (FKM) for unrivaled fuel compatibility. With a light weight, great looking outer braid, and stainless steel under-braid, along with an advanced inner-tube, the 235 Series hose by RHP offers a sleek clean look without sacrificing performance. Select the hose diameter and length for your application. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends * NHRA accepted Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications.
( 1 )
$880.37
The RHP 200 Series hose is a true double braided stainless hose that uses the highest quality stainless wire available. RHP's 200 series hose uses a fuel resistant seamless NBR synthetic tube liner. Combine that with their industry exclusive bonding process and you have an extremely high performing hose that offers excellent protection from abrasion, while maintaining maximum pressure capabilities. NHRA-accepted, this hose is available in a variety of different lengths, select the application you need. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1000 Series swivel seal, 6000 Series non-swivel and 7000 Series crimp style hose ends Important Note: Not designed for use on high pressure power steering lines and is not to be used for high pressure hydraulic applications. Not to be used with e85 gas.
( 4 )
$1,033.17
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
