Availability
Level 7 Motorsports' Direct Fit Enthusiast Series brake line plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, as well as Blazer/Jimmy, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis, as well as for select year Blazer/Jimmy models * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$537.99
—
$583.99
Original steel lines can rust from exposure to moisture and corrosive road treatments. Dorman's stainless steel fuel line sets make a great replacement solution, as they resist rust and corrosion—and with their preformed section design will save on installation time. Order the application to fit your needs.
( 27 )
$569.99
OMIX-ADA brake line kits will help you stop when you propel your 4-wheeler down highways, back roads, or through the roughest terrain you can find. They have been developed, tested, and trail-ridden to be perfected for you, to ensure their long-lasting durability and performance. These brake line kits are made of quality steel and stainless steel by enthusiasts to bring you the finest off-road solutions possible.
( 18 )
$529.99
Summit Bucks
ACDelco GM Genuine Parts fuel feed lines are GM-recommended replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. These original equipment lines will provide the same performance, durability, and service life you expect from General Motors. Order the model designed to fit your application.
( 5 )
$647.99
—
$716.99
Mopar Replacement fuel vapor lines are recommended parts to swap out your corroded, rusted, or damaged originals. These tubes are made to exact specifications and include fittings for proper fit, form, and function. Order the Mopar Replacement vapor canister vent hose designed to fit your application.
( 9 )
$640.99
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
Don't ruin excellent engine modifications by putting a new bend in old fuel lines. Fleece Performance high-pressure fuel lines are OEM-quality, look great, and come with M14 x 1.5 fittings. Use them for straight lines, and get one of our quality benders (not included) for perfect angles and a professional appearance. Fleece 8mm high-pressure fuel lines are available in lengths ranging from 7 in. to 24 in.
Not Yet Reviewed
$569.00
Gotta Show Products A/C hose kits are the real deal when it comes to plumbing the air conditioning system in your hot rod, classic, truck, or custom build. They deliver 100 percent stainless steel construction—not plated—and are ready to polish. All fittings are female O-ring formed, making them compatible with any aftermarket A/C system. These cut-to-fit kits may include hoses, drier fittings, condenser fittings, and bulkhead or evaporator fittings. From the firewall forward, complete your A/C system with Gotta Show hose kits.
( 1 )
$534.99
—
$726.99
Vintage Air Stainless Steel ProLine kits take you're climate control install to the next level. Instead of boring old rubber lines under your hood, Vintage Air has assembled these kits with stainless steel tubing, stainless steel TiteFit nuts, braided stainless steel ProLine hose, ProLine fittings, and your choice of 4-way, 2-way, or no firewall bulkhead. Vintage Air ProLine kits will give your ride a serious, professionally finished look! Contents Include: * Choice of bulkhead (4-way, 2-way, or none) * 6 ft. of #6 Stainless steel tubing * 3 ft. of #8 Stainless steel tubing * 6 ft. of #10 Stainless steel tubing * 2 ft. of #6 Standard rubber A/C hose * 2 ft. of #10 Standard rubber A/C hose * 1 ft. of #8 Braided stainless steel A/C hose * 1 ft. of #10 Braided stainless steel A/C hose * 2 #8 Straight Proline hose end fittings * 2 #10 Straight Proline hose end fittings * 1 #6 Straight hose end barb fitting with ferrule * 1 #6 90 Degree hose end barb fitting with ferrule * 1 #10 Straight hose end barb fitting with ferrule * 1 #10 90 Degree hose end barb fitting with ferrule * 4 #6 Stainless steel braze-on line ends * 2 #8 Stainless steel braze-on line ends * 2 #10 Stainless steel braze-on line ends * 4 #6 TiteFit nuts * 2 #8 TiteFit nuts * 2 #10 TiteFit nuts * 2 #8 Stainless steel braze-on nuts * 2 #10 Stainless steel braze-on nuts * 1 134a Braze-on #8 (high side) service port * 1 134a Braze-on #10 (low side) service port * 6 #6 O-rings * 4 #8 O-rings * 6 #10 O-rings * 1/8 oz. Tube of refrigerant oil
Not Yet Reviewed
$539.99
—
$603.99
S&S Cycle oil supply line installation kits include a special transmission oil pan and stainless steel hard lines that make hook-up straight forward and attractive. Features: * Allows the installation of a specially machined engine or crankcase * Wrinkle black oil pan incudes oil line routing * Oil pickup tube routed to rear of oil pan for extended high acceleration (or wheelies) * Stainless steel hard oil lines
Not Yet Reviewed
$699.95
Motorcraft air conditioning hoses and lines combine quality materials and design excellence to promote product integrity and customer satisfaction. They're manufactured with the right lengths and widths to replace original equipment, so you'll find the hoses and lines to fit your application.
Not Yet Reviewed
$557.99
—
$567.99
Motorcraft power steering hoses are competitively priced for all Ford and Lincoln vehicles, offering great value and long-lasting quality. Engineered from high-quality materials for excellent performance under operating conditions, most feature EPDM rubber that resists oil and grease, while withstanding ozone and high-underhood heat. Motorcraft power steering hoses provide the same original equipment fit for an easy installation.
( 2 )
$517.99
Summit Bucks
ACDelco power steering hoses carry pressurized fluid from the power steering pump to the steering assembly in order to turn the wheels to the left or right. The silver heat guard helps to protect the hoses in high-temperature areas, and fluid restrictors help to absorb vibration and reduce noise. Double-lock beading with barbed tube ends provides crimping and assists in leak prevention. Order the model designed for your vehicle and engine application.
( 9 )
$556.99
MSD Atomic EFI fuel return line kits are designed to allow you to run a return line with your MSD Atomic EFI system. They include a high-pressure regulator, 15 ft. of 3/8 in. fuel line, and the required fittings for assembly.
( 15 )
$549.95
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$513.50
—
$604.75
Redhorse Performance 305 Series non-carbon lined black PTFE hose is designed to deliver the same performance as their 302 Series S.S. PTFE hose but with a more attractive price point! Engineered for use with 1200 Series PTFE hose ends, the 305 Series non-carbon lined black PTFE hose is available in -04 AN to -12 AN diameters. Hit the sweet spot between ease of installation and high performance with these AN hoses from Redhorse Performance. Select the hose diameter needed for your plumbing project.
Not Yet Reviewed
$625.00
—
$675.00
DeatschWerks X2 Series fuel pump plumbing kits contain all the items you need for the proper install of your X2 pump module—and nothing you don't. DW packages a hard anodized regulator to deliver stable air-to-fuel ratios for optimal performance, a precision fuel pressure gauge, a filter with a meticulously engineered stainless steel element, fittings, and braided stainless steel fuel line that's either PTFE or CPE lined—your choice. Choose the DeatschWerks X2 Series fuel pump plumbing kit best suited for your application.
Not Yet Reviewed
$749.00
For high-pressure brake lines, Russell PowerFlex hoses are the preferred choice. When used in conjunction with PowerFlex hose ends, the end result is a durable and professional hose that resists leaks, providing years of service. With a PTFE inner liner featuring 308 stainless steel braid, and a 2,500 psi rating, what more can you ask for?
( 44 )
$533.95
Harness the power of PTFE with Redhorse Performance 302 series PTFE high performance hoses! Engineered for use with RHP's 1200 Series reusable PTFE hose ends, the 302 Series is equipped to handle extremely high-pressure and are fully compatible with all types of fuel. Select the hose diameter and length suited for your application needs. Features and specs: * Features a stainless steel weave over a custom-designed smooth bore dual-layer conductive core PTFE inner-tube that eliminates the risk of electro-static discharge * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * NHRA accepted
( 1 )
$555.66
—
$703.84
Redhorse Performance 303 Series PTFE hose is equipped to handle extremely high pressure and are fully compatible with all types of fuel. The hose features a stainless steel weave over a custom-designed smooth bore dual-layer conductive core PTFE inner-tube that eliminates the risk of electro-static discharge. Harness the power of PTFE with RHP's 303 Series PTFE high performance hoses! Available in a variety of diameters and lengths, select the hose application suited to your needs. Features and specs: * Available in precut 3 ft., 6 ft., 10 ft., 20 ft., and 50 ft. lengths * 50 ft. lengths only available in sizes -04 through -10 * Engineered for use with RHP 1200 Series reusable PTFE hose ends * NHRA accepted
Not Yet Reviewed
$529.03
—
$670.26
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 84 )
$506.99
—
$719.99
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
Get your ride set up with DeatschWerks DW400 pump module return plumbing kits. Designed to fit the DW400 pump modules, these kits include stainless steel braided flex line, with either PTFE or CPE hose, and the necessary fittings and other components that allow you to achieve the flow you want and fit your ride needs. Fuel delivery is an important aspect to every vehicle, so order the DeatschWerks DW400 pump module plumbing Kit recommended for your application.
Not Yet Reviewed
$649.00
—
$749.00
DeatschWerks stainless steel double braided hose is offered in PTFE and CPE rubber material. Their selection of sizes and several lengths delivers compatibility with the increasing list of available pump gases, race fuels, and ethanol blends wrapped in stainless steel braided coverings. Choose the size, length, and material preferred for your plumbing project. DeatschWerks stainless steel hose inner material choices: * CPE—rubber fuel lines are cord reinforced for high-pressure and lined for compatibility with ethanol-based fuels * PTFE—lines have increased fuel compatibility for methanol and e100; PTFE also allows tighter radius turns and zero fuel vapor permeability
( 6 )
$550.00
—
$600.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
