Availability
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
$673.95
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
Level 7 Motorsports' Pro Series brake plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used * Optional rear whip hose bracket is available for use with rear mounted fuel tanks (factory bracket will interfere with whip hose if using a rear mounted tank) Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$769.99
—
$801.99
Level 7 Motorsports' Direct Fit Enthusiast Series brake line plumbing kits offer a more budget-friendly option over their original chassis plumbing kit without sacrificing fitment and quality. These lines feature zinc-coated steel ends and standard vinyl-wrapped line clamps. Developed specifically for the popular 1967-87 Pro Touring Chevy C10 trucks, short bed and long bed styles, as well as Blazer/Jimmy, the kits are designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look on your classic vehicle. The lines in these Level 7 kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they're covered with a special PVC coated material for maximum durability against debris and abrasion. The hoses are all DOT-approved and are all crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Select the kit designed for your vehicle. Additional details: * DOT approved hose kit to plumb your factory 1967-87 C10 chassis, as well as for select year Blazer/Jimmy models * PTFE hoses, stainless reinforced, and silicone coated * Black in color * Select kits may include adapters, depending on your application, so stock front and rear hoses can be used Notes: Brake calipers hoses and rear axle plumbing are not included. Front caliper outlet is relocated to the front of the subframe as opposed to the stock location behind the subframe. This keeps the front caliper hoses from binding.
Not Yet Reviewed
$537.99
—
$775.00
These Mishimoto ancillary turbocharger hose kits are what you need to upgrade your existing hoses. These hose kits are intended to replace your factory rubber hoses that are prone to failure with age or added boost pressure. Mishimoto uses a dual-layer hose design that is constructed from high-grade silicone embedded with ultra-strong fibers, allowing them withstand heat, increased pressure, and the elements better than factory rubber hoses. These kits are available in a variety of colors, so you can customize your engine bay, and they are designed to be vehicle-specific so that fit and function are not compromised. Don't wait until a hose fails--upgrade them now with these Mishimoto ancillary turbocharger hose kits.
( 10 )
$510.95
Level 7 Motorsports Pro Series 1973-87 C10 chassis brake plumbing kits were developed specifically for the popular Pro Touring Chevy C10 trucks, and designed to be used on your stock C10 frame and to work with the Wilwood tandem master cylinder and combination proportioning valve. The brake lines in each kit follow the factory routing line while adding a clean and modern look to your classic vehicle. The lines in Level 7 Pro kits feature a PTFE-coated inner lining that is compatible with all fluids and is wrapped in a braided stainless steel cover to resist abrasion and corrosion. Then they are covered with a special PVC coated material for maximum durability against debris and abrasion. All Pro Series hoses use stainless steel hose ends for many years of corrosion resistance and durability, and they are all DOT approved and crimped by the manufacturer. Included in each kit are the hoses from the Wilwood master cylinder to the chassis, chassis bulkhead fittings and bracket, hoses for the front left and right that terminate exiting the frame, and a rear hose in two parts that terminates on the factory frame hose bracket. Additional details: * DOT-approved hose kit to plumb your factory 1973-87 C10 chassis * Can use stock front and rear brake hoses * -3 AN adapters included * PTFE hoses, stainless reinforced, and silicone coated * Black in color
Not Yet Reviewed
$774.99
ICT Billet electric water pump hose kits offer an easier and cleaner way to plumb a remote electric water pump, providing benefits like a more controlled cooling system, faster engine warm-up, and improved engine life. These kits, which use AN fittings and braided hoses, simplify the installation by providing the necessary adapters and hoses to connect the engine water outlets to a remote-mounted electric pump. Key benefits include improved performance and a custom, clutter-free engine bay by eliminating the factory water pump and its associated belt-driven strain. The kits often feature black billet aluminum fittings and corrosion-resistant, braided hoses for a durable and high-quality look. Select the kit designed for your application needs.
Not Yet Reviewed
$539.99
Summit Bucks
Clearance
ACDelco offers heater hoses for virtually any vehicle from the 1940s and up. These replacements are available in a wide array of sizes and configurations—for hundreds of hose connection positions. They're designed to original factory specs to ensure fit and performance. Order the hoses recommended for your applications.
( 32 )
$613.99
Summit Bucks
ACDelco Gold molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These OE-style hoses are specially designed, GM factory-molded replacements to fit today's smaller, tighter-fitting engine compartments. ACDelco Gold coolant hoses are temperature rated from -40 to 275 degrees F (-40 to 135 degrees C) and are approved for marine applications. Order the model recommended for your vehicle. (Note: Do not use these molded coolant hoses for fuel or oil transfer purposes.) Features include: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications
( 72 )
$510.99
Motorcraft offers a full line of direct fit replacement radiator hoses. Made from EPDM, the rubber-over-braid construction resists swelling, splitting, and cracking. This ensures performance and longevity. Factory-recommended, these hoses are vehicle-specific for makes and models such as Ford, Lincoln, and Mercury. Give your coolant a dependable path to flow with Motorcraft radiator hoses.
( 3 )
$587.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
