Availability
Continental Hysunite fuel line/emission control hose is designed especially for gasohol and later carbureted vehicle applications with high under-the-hood temperatures. The cover is oil- and gasoline-resistant, and can withstand exposure to fuel, vapor, moisture, and heat up to 250 degrees F. The Chemigum rubber tube is specially compounded to resist gasoline, diesel, and other fuels, while the high-strength synthetic textile reinforcement brings minimum burst to 175 psi. Continental Hysunite fuel line/emission control hose meets SAE specification J30R7.
( 31 )
$84.99
—
$93.99
Clearance
AGS EZ-Fit brake line kits are the answer for rusted OE brake lines. These complete replacement kits are fast, economical, superior-quality solutions to replacing steel brake lines in the over 100 million popular GM, Chevy, Ford, Dodge, Jeep trucks and SUVs that experience an almost 100 percent failure rate in the rust belt regions of North America. EZ-Fit brake lines feature NiCopp, the ultimate corrosion-proof tubing that outlasts even stainless steel. The kits are application-specific; order the model recommended for your vehicle. Additional features: * Highest quality machined flares for leak-proof and hassle-free connections * Black oxide fittings provide increased corrosion protection over standard zinc-coated fittings * EZ-Bend technology makes bending, routing, and installing easier than pre-bent lines
( 6 )
$90.99
The Stop Shop offers front to rear brake lines for the enthusiast who wants to replace old rusty/broken lines for better braking performance. These quality brake line components feature the correct factory bends and come with plated steel fittings and stainless steel spring guard, where applicable. Choose the model in the application needed to replace your OEM hard lines.
( 5 )
$67.99
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 132 )
$69.39
Mishimoto silicone radiator hoses combine factory fit with modern finish and performance. These trimmable hoses are constructed from 5-layer silicone with heat-resistant fibers for strength and longevity. The hoses are available for many vehicle-specific applications, manual and automatic. Finish your project with these high-quality radiator hoses from Mishimoto.
( 18 )
$82.95
Motorcraft offers their brake line assemblies as a direct replacement for your Ford, Mercury, or Lincoln. Available for cars, trucks, and vans, these brake line will get you back on the road safely. Motorcraft brake line assemblies are designed specifically for year, make, and model, so they will fit exactly like the original did. You can trust Motorcraft parts to supply your Ford, Mercury, or Lincoln with the same high-quality parts that your vehicle had when it left the factory. Order the brake line assemblies for your application.
( 2 )
$96.99
Motorcraft molded heater hoses are pre-shaped for an easy install into your vehicle. They are made of EPDM rubber-over-braid to resist splitting, cracking, and swelling. They are extremely strong and resistant to environmental elements, so they'll last a long time.
( 4 )
$57.99
Let MagnaFuel keep your pressures in check with their adjustable bypass fittings and couplers. They enable you to set the bypass to recirculate excess fuel back into your tank when pressures reach a defined point—to prevent excessive pressure through your fuel system or carburetor. The fittings are adjustable between 18 and 35 psi, and the -8 AN threads install easily, allowing you to keep your fuel pressure at an optimal level without spiking.
( 2 )
$102.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$63.99
—
$67.99
Russell ARB stainless hose kits replace your OEM lines with renewed performance. They offer your differential carrier setup greater durability—and they won't pinch in tight bends. These kits also include ARB air locker fittings to create your own assemblies. The choice is plastic or stainless? The decision is easy--Russell ARB stainless hose kits, available in multiple lengths to accommodate different axle applications.
( 3 )
$51.95
—
$74.95
The Stop Shop brake tubing kits will help you facilitate restoration and repair on your vehicle for optimal braking performance. Each kit comes with the brake line tubing, and may include an assortment of the most common standard brake line fittings, a tubing cutter, or both. Choose The Stop Shop brake tubing kit best suited for your plumbing project.
( 23 )
$67.99
Dayco anti-smog PCV hoses are made for applications where petroleum vapors and blowby gases are recirculated through the intake manifold for total combustion and reduced emissions, and on gasoline engines for fuel line applications. These hoses feature a cube and cover compound designed to resist oil and help reduce emissions to EPA-acceptable levels. Dayco anti-smog PCV hoses meet SAE J30R7 requirements.
( 3 )
$105.99
Russell Pro swivel brake hoses feature Russell's exclusive 360 degree swivel banjo system. The Pro swivel banjo is incorporated at the caliper end of the hose assembly, making rotation alignment hassle,free. Using standard installation procedures, simply route your hose using all stock mounting locations, attach the banjo at the master cylinder, and rotate the 90 degree banjo at the caliper to the precise angle required to complete your installation. These Russell Pro swivel banjo fittings are engineered using two O-rings for a guaranteed positive seal supported by a 305 stainless steel retention pin for permanent attachment. Russell Pro swivel brake hoses are factory-constructed using PowerFlex hose and a dual crimp method that has been an industry standard for 25 years. These Russell Pro swivel brake hoses meet the strict guidelines of DOT FMVSS-571-106 standards and are finished in high-luster chrome with a clear coated hose that prevents chafing on painted surfaces. They come available in 16 lengths to complete any build, from stock to custom.
( 1 )
$57.99
—
$66.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
