Availability
On Sale
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$368.95
—
$528.95
$332.05
—
$475.95
On Sale
FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.
( 2 )
$373.00
—
$512.00
$335.70
—
$460.80
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$319.95
$287.95
On Sale
Aeromotive PTFE stainless braided fuel lines are ideal for street and racing applications where E85, gasoline, or methanol compatible fuel hose is needed. The stainless outer braid provides impact and abrasion resistance to protect the PTFE inner liner. These liners are specially carbonized for conductivity, which is critical for fuel handling. The fuel lines provide outstanding flow capacity; they're smaller on the O.D. for the same I.D. of a comparable rubber braided line for easier routing in tight spaces. The lines deliver extended service life in any fuel, as they will not harden, micro-fracture, or permeate fuel vapor (vapor-walk) like normal rubber braided line—minimizing fuel smell in the vehicle storage area. Choose the length and AN diameter needed for your application.
( 9 )
$278.50
—
$513.50
$250.65
—
$462.15
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$452.50
$407.25
On Sale
When upgrading your classic Mustang to Leed disc brake systems, upgrade your V8 to all new brake lines as well. LEED Brakes complete brake line kits supply you with Ford pre-bent brake lines to work with your stock mounting locations and Leed disc brake conversion kits. The kits are designed to work with both the single exhaust and dual exhaust vehicles.
( 2 )
$289.99
$260.99
On Sale
BD Diesel Performance offers stock replacement fuel injector lines for applications such as Cummins 5.9L ISB (24 V) engines. Fuel lines get rusty due to constant exposure to the elements, so it's strongly recommended by OE manufacturers to replace the fuel lines after removal. BD Diesel provides zinc plated, exact-fit fuel lines to allow for corrosion resistance and easy installation. They are pre-formed to the correct factory specifications. Part number BDD-1050150 replaces OE parts: 5086871AA, 5086872AB, 5086873AB, 5086874AB, 5086875AB, and 5086876AD. Also replaces Cummins parts: 3957081, 4988810, 4988809, 5289447, 4988807, and 4988806.
( 1 )
$281.95
$253.76
On Sale
Summit Bucks
Mishimoto ancillary hose kits are constructed from five layers of silicone with heat-resistant embedded fibers. These hose kits are a huge upgrade from the current degradation-prone rubber hoses your vehicle has from the showroom. Ancillary hose kits are available in different color options for each vehicle. Bolster your cooling system with the silicone hose kit recommended for your application.
Not Yet Reviewed
$290.95
—
$305.95
$260.95
—
$275.36
On Sale
Waterman Racing shut-off valves are valuable plumbing accessories. Constructed from aluminum with an anodized finish, the valves are available for different inlet/outlet sizes. Order the model needed for your application.
( 1 )
$357.99
—
$438.99
$322.19
—
$395.09
On Sale
Build your own high-pressure line assemblies with Fragola crimp fittings. These crimp fittings are designed for use with Fragola PTFE hose and are available in correct AN sizes to meet your working pressure requirements. Fragola offers numerous variations so you can create what you need, when you need it, with these performance crimp fittings.
( 1 )
$272.99
—
$322.99
$259.34
—
$306.84
On Sale
Summit Bucks
Mishimoto has what you need to finish your project. These silicone hoses give you the freedom to cut-to-length and bend where you need. Constructed of five-layer silicone and embedded fibers, these hoses provide strength and good looks all in one package. Available in several colors, lengths, and sizes to match any engine bay. Additional features include: * Improved heat and pressure tolerance * High-quality worm-gear clamps where applicable * Quick-disconnect fittings where applicable * Limited lifetime warranty which includes accident protection
Not Yet Reviewed
$306.95
—
$307.95
$256.95
—
$277.16
On Sale
DeatschWerks stainless steel double braided hose is offered in PTFE and CPE rubber material. Their selection of sizes and several lengths delivers compatibility with the increasing list of available pump gases, race fuels, and ethanol blends wrapped in stainless steel braided coverings. Choose the size, length, and material preferred for your plumbing project. DeatschWerks stainless steel hose inner material choices: * CPE—rubber fuel lines are cord reinforced for high-pressure and lined for compatibility with ethanol-based fuels * PTFE—lines have increased fuel compatibility for methanol and e100; PTFE also allows tighter radius turns and zero fuel vapor permeability
( 6 )
$350.00
—
$600.00
$315.00
—
$540.00
On Sale
DeWitts Radiator oil cooler line kits include an oil adapter block, GM oil seal, metric bolts, and a 1/8 in. NPT plug. They are designed to bolt directly onto any LS series engine and provide two large -10 AN connections. The adapter has a port for the factory temperature sender and an auxiliary port for other needs. These installation kits also everything needed for hooking up an aftermarket internal oil cooler on your C5 Corvette and the LS-based engines listed in the Applications section.
( 1 )
$519.99
$467.99
On Sale
Summit Bucks
More tolerant, more efficient, and 100 percent silicone—Mishimoto radiator hose kits offer a boost of performance and looks under your hood! Combining high-grade silicone and heat-resistant embedded fibers, Mishimoto hoses provide exceptional heat reduction, increased pressure tolerance, and a whole lot of satisfaction. Radiator hose kits are available for a wide range of makes and models in black, blue, red, and limited-edition orange (specific makes only) to enhance the appearance of your engine bay. Some models also include hose clamps. Upgrade the performance and style of your vehicle with superior Mishimoto radiator hose kits.
( 77 )
$279.95
—
$470.95
$251.96
—
$423.86
On Sale
Summit Bucks
Mishimoto silicone radiator hoses combine factory fit with modern finish and performance. These trimmable hoses are constructed from 5-layer silicone with heat-resistant fibers for strength and longevity. The hoses are available for many vehicle-specific applications, manual and automatic. Finish your project with these high-quality radiator hoses from Mishimoto.
( 18 )
$291.95
—
$355.95
$262.76
—
$320.36
On Sale
Top racing teams depend on Earl's Perform-O-Flex hose. It features an inner liner of Temprel synthetic rubber, a partial-coverage protective sheath of stainless steel braid embedded in the liner during manufacturing, and a full-coverage outer protective sheath of high-tensile stainless steel wire braid. It can withstand an operating temperature range of -40 degrees F to +300 degrees F, and still deliver you to the winner's circle. Perform-O-Flex hose is compatible with most fuel, oil, and water; and it's available in a wide variety of AN sizes, lengths, and diameters.
( 2 )
$849.95
$467.95
On Sale
DeWitts engine oil lines with bypass are modified hose assemblies for use with driver side (left) EOC applications. The adapter block includes a port for the oil pressure switch. Choose the proper oil lines for your vehicle.
Not Yet Reviewed
$370.99
$333.89
On Sale
Aeromotive AN hoses feature a braided stainless steel lining that covers a durable inner rubber hose. They're available in various lengths and diameters for usage with engine oil, gasoline, or water. Depending on your selection, the hose can reach up to a maximum operating pressure of 1,500 psi. Aeromotive hoses come in multiple AN sizes; choose what's needed for your application.
( 2 )
$368.15
$331.34
On Sale
Fragola Performance Systems stainless steel inner support springs add an extra measure of support to high-vacuum applications with stainless braided hose. To install them, use a solid rod smaller than the inside diameter of the hose and then slice the end of the rod and wind the inner support spring into the hose. Remember the old adage--an ounce of prevention is worth a pound of cure!
Not Yet Reviewed
$279.99
—
$346.99
$265.99
—
$329.64
On Sale
Quicksilver marine fuel lines are durable, low permeation hoses that are gray in color to help reduce potential for vapor lock on warm days and exposure to sunlight. They are EPA compliant, and produced by Mercury Marine to stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive. Available in different diameters, select the fuel line preferred for your boat's engine.
Not Yet Reviewed
$311.99
—
$483.49
$280.79
—
$435.14
On Sale
Summit Bucks
The VW/Audi MQB platform vehicles combine a potent turbocharged 4-cylinder, modern styling, and a surprisingly effective chassis to produce a vehicle that portrays the legendary spirit of the hot hatch. Mishimoto has provided substantial support in the cooling department for the MQB platform in the form of a MK7 Performance aluminum radiator and a MK7 Performance intercooler. To continue providing products for VW and Audi customers, Mishimoto has developed a silicone intake coolant re-route hose kit. Although a small component, this hose upgrade makes a significant difference in engine bay aesthetics for vehicles featuring an aftermarket intake system such as the Mishimoto MQB Performance air intake. This silicone re-route hose is constructed from five layers of silicone with heat-resistant embedded fibers. The material is superior to the factory rubber counterpart and will provide years of service without degrading. Mishimoto engineers have integrated a factory-style internal check valve to ensure coolant returns to the reservoir properly. This kit is designed to function with both stock intake systems as well as aftermarket air intake kits. It includes high-quality worm gear clamps, making installation hassle-free. Additional notes: * Re-routes coolant hose under intake for a sleek look * Built-in check valve ensures proper coolant flow and recovery * Direct fit for 1.8T/2.0T VW/Audi MQB platform Golf, GTI, Golf R, and A3
Not Yet Reviewed
$292.95
$263.66
On Sale
Summit Bucks
Why risk heading out on the trails without ensuring your cooling system is operating efficiently. Mishimoto heater and radiator hose kits are constructed from high-grade silicone, embedded with heat-resistant fibers, and include high-quality clamps for a hassle-free installation. This combination of materials provides increased pressure tolerances and superior temperature resistance up to 330 degrees F. The silicone hose kits vary slightly and may include heater hoses with upper/lower radiator hoses and/or ancillary hoses to upgrade your deteriorating stock rubber hoses. Available in a several colors, these kits also carry the Mishimoto Lifetime Warranty. Check availability and select the perfect fit for your vehicle.
Not Yet Reviewed
$285.95
$257.36
On Sale
Black Horse Off-Road bull bars treat your vehicle to an upgraded look and protection. Featuring one-piece construction, they are available in powdercoated black steel or T-304 polished stainless steel providing strength and long-lasting service. Installation is made simple, with no welding or drilling required on most vehicles. With direct bolt-on installations, they can be easily attached to your vehicle's chassis, and of course, they are resistant to rust and corrosion.
( 12 )
$343.06
—
$358.96
$308.75
—
$323.06
On Sale
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$649.95
$357.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
