Availability
Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.
( 40 )
$102.50
—
$208.99
Fragola Performance Systems 6000 Series PTFE-lined stainless hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Each hose is 100 percent inspected and any flawed sections are discarded. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, they will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined stainless hoses are available in assorted sizes, lengths, and hose end configurations to perfectly fit your application. Hose sizes 6-12 AN have a conductive core to dissipate static electricity. Some hose sizes are available with a clear cover, black cover or no cover depending on your preferences and how much protection you want your hose to have.
( 117 )
$100.99
—
$263.99
Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).
( 83 )
$105.50
—
$269.99
Recommended for motorsports applications, Fragola Performance Systems premium black nylon race hose is designed with a black synthetic rubber core to make it resistant to oil, fuels, coolants, and alcohol. This premium race hose is reinforced with a single braid of bright, corrosion-resistant type 302 stainless steel wire braid, and the black braided nylon cover makes this lightweight hose both durable and attractive. Its 500 psi working pressure is more than sufficient for most oil, water, and fuel systems. Fragola Performance Systems premium black nylon race hose is available in various lengths and diameters and is designed to be used with FPS Series 2000 hose ends and FPS Sport-Crimp hose ends.
( 54 )
$108.99
—
$249.99
Summit Racing™ premium braided nylon hose will handle today's fuels and pressures--plus keep you on budget! Our race hose is certified for use with E-85, as well as additives currently found in diesel, ethanol, and alcohol based-fuels. And, these 30R9 tested and approved hose features burst pressure to 500 psi with minimal permeation. The hose is built with 4-ply lightweight--lighter than stainless braided hose--construction with an FKM fluoroelastomer lining and is reinforced with a braid of stainless steel. The design and materials work to eliminate fuel permeation under extreme and extended conditions that lead to sour gas odors and dry, cracked hose. Summit Racing™ premium braided nylon hose offers superior compatibility with fuels, as well as strength and value for you and your race car.
( 52 )
$104.99
—
$190.99
Wilwood stainless steel braided Flexline kits are manufactured to high-quality standards and are available in various styles. These premium-grade kits deliver a "hard-line" feel and have been designed for specific applications as terrific replacements for OE rubber hoses. All required fittings are included.
( 419 )
$101.19
—
$206.19
This SAE 30R7 rated Summit Racing™ braided nylon hose is designed for use with gas, oil, diesel, and other fluid applications. It uses a higher grade nitrile inner core that is specifically compounded to hold a higher fuel resistance than any other nylon hose product on the market. It can handle heat levels up to 275 degrees F and a maximum working pressure of 350 psi. Summit Racing™ braided nylon hose is lightweight and flexible. These features, combined with its ease of assembly, make it the fastest growing choice of hose products for racing and performance enthusiasts.
( 189 )
$103.99
—
$194.99
Summit Racing™ flexible transmission cooler lines make cooling your automatic transmission easy. These lines come with all the necessary fittings to run your lines from the cooler to the transmission. The PTFE-lined braided hose is made from heavy-duty 304 stainless steel braids that offer premium strength and flexibility to prevent the hose from breaking down. Quality anodized aluminum hose ends and fittings create a perfect seal to ensure your transmission gets the fluid it needs. Simplify your installation with one of our flexible line kits.
( 83 )
$100.99
—
$110.99
Have a fuel delivery dilemma? Our Summit Racing™ fuel line combination kits can help. They're available in more than a dozen packages, containing fuel line, fittings, hose ends, and assorted accessories needed for easy repair or maintenance. Choose the options that best suit your application: fuel line length and diameter; start and finish plumbing locations; with or without clamps, and more.
( 85 )
$102.88
—
$171.93
When our guys found this high-quality hose at such a good price, we thought they were trying to put one over on us. Luckily for you, this hose is just as good as the expensive stuff, without the big bill. Summit Racing™ stainless steel hose consists of a CPE (Chlorinated Polyethylene) inner tube with a partial stainless steel reinforcement inner braid. On top of that, we add a heavy-duty, protective, full stainless steel braid on the outside, making it exceptionally lightweight, flexible, and durable. Even better, our hose is designed to handle gasoline, oil, or coolant.
( 539 )
$101.99
—
$283.99
Wilwood no-bleed quick-disconnect fittings are manufactured from lightweight aluminum, precision engineered, and hard anodized. These dry break quick-connect/disconnect fittings make changing brake components faster with no need to bleed the system. A quick quarter-turn disconnects them, without tools, but they connect as secure as a threaded flex line fitting. They feature an internal spring-loaded seal that prevents air from entering or fluid from escaping and are engineered explicitly for high-pressure hydraulic brake fluid systems. Race-proven in circle track, off-road, and endurance road racing, Wilwood no-bleed quick-disconnect fittings are offered in male and female styles, or together in a kit. Choose the fitting(s) preferred for your system.
( 1 )
$126.49
Tanks Inc. offers fuel line kits for GM LS that include the hose and fittings needed to hook up one of Tanks Inc. fuel pumps to an LS engine swap setup. They're designed for LS engine swaps using a single fuel inlet fitting for the fuel source. Tanks Inc. GM LS fuel line kits include: * Fuel pressure regulator/fuel filter combination * 25 ft. of -6 AN twist-lock fuel line * Six straight -6 AN straight twist-lock fittings * Two 1/4 in. NPT to -6 AN straight fittings * Three 3/8 in. female quick-disconnect to -6 AN male fittings * 5/16 in. female quick-disconnect to -6 AN male fitting
( 26 )
$198.99
—
$204.99
Summit Bucks
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$127.99
—
$275.95
Aeroquip's AQP socketless racing hose is constructed from AQP elastomer, with a smooth inner bore for flexibility and special textile braid reinforcement for strength. What does this mean to you? No more wrenches, no more sockets, and no more scraping your knuckles trying to install new hose. It's compatible with most fuels, coolants, and oils. Plus, with a temperature range of -55 to 300 degrees F and a maximum pressure rating of up to 250 psi, it'll handle most plumbing jobs safely and securely.
( 77 )
$103.99
—
$218.99
Summit Racing™ PTFE hose is high-quality hose at a great price. Designed to transfer fluids and fuels in the most demanding conditions, they deliver smooth, non-stick inner cores wrapped in heavy-duty 304 stainless steel braids. Our hose offers light weight strength and flexibility without breaking down—and durability for a long service life. PTFE hose is available in a variety of lengths, diameters, and PSI ratings. Meet the needs of your vehicle and your wallet with quality-priced Summit Racing™ PTFE hose.
( 198 )
$111.99
—
$249.99
Vibrant Performance quick-release fittings are lightweight and constructed entirely from 6061 aluminum alloy. They allow for quick and easy disassembly by hand of any fluid-related component with no mess or spillage. They're perfect for use on oil, coolant, and fuel lines. Vibrant Performance quick-release fittings are available in sizes ranging from -4 AN to -12 AN in an anodized black finish.
( 3 )
$109.99
—
$205.99
All Vintage Air hose kits use barrier-type refrigerant hose for use with HFC-134a and R-12 refrigerants. And when you need more length, Vintage Air has those kits, too. Vintage Air reduced barrier beadlock extended length hose kits include adequate hose length to connect to most universal systems. Kits are available with or without drier and mounting clamps. Kits include: * 14 fittings: -- 135-degree compressor fittings with service ports -- Firewall bulkhead fittings * Assorted O-rings, #6, 8, and 10 * 10 ft. of #6 reduced barrier hose * 6 ft. of # 8 reduced barrier hose * 9 ft. of # 10 reduced barrier hose * Refrigerant oil
Not Yet Reviewed
$172.99
—
$183.99
Plumb your HydraStop system with Classic Performance hydraulic brake-assist hose kits for leak-free performance. They offer a choice of rubber or braided stainless steel lines for your project. The proper hose and connections will provide the proper stopping performance you need. Order the hydraulic brake assist hose kit best suited for your application.
( 18 )
$174.99
—
$224.99
Summit Bucks
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$101.95
—
$275.95
Our Summit Racing™ stainless steel flexible hoses bend and cut easily, are non-corrosive, and dissipate heat better than rubber hoses. These hoses are available with standard rubber ends or with polished aluminum covers. Stainless steel clamps and reducer inserts are included.
( 243 )
$100.99
—
$149.99
When it's time to change the fuel lines on your vehicle, look to ACDelco for GM-recommended replacements—including fuel feed, vapor, and return hose assemblies. The lines are available in a wide range of sizes, materials, and configurations for fitment on countless vehicles from the 1990s and up. Order the model designed for your application.
( 8 )
$102.99
—
$239.99
Mopar Replacement fuel feed lines are genuine OE replacements made from quality materials to provide reliable, long service with the right fit, function, and value. Aging lines can crack, rust, and leak—affecting fuel economy and performance. These lines are available in a variety of configurations for fitment on specific vehicles.
( 31 )
$100.99
—
$284.99
FTI Performance automatic transmission cooler line kits contain the necessary components to add an external cooler when upgrading your transmission and torque converter. They include AN hose, hose ends, and adapter fittings to install your new cooler and keep your street/race machine cool.
( 3 )
$219.00
If you live in a cold climate, efficient heat transfer is important for the cost-effective operation of your vehicle. Dayco has the solution with their Insulone heater hoses. These premium hoses deliver heated coolant to your heater core with a minimal loss of heat. Constructed from a synthetic EPDM rubber compound, they are spiral-reinforced and feature an insulating layer with a special compound for excellent burst strength and heat resistance. Dayco Insulone heater hoses are compatible with all common coolants and coolant additives.
( 5 )
$119.99
—
$243.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
