Availability
Showing In Stock Items. Show All 54 Items.
Summit Bucks
Russell AN to NPT adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. These fittings are available in straight, 45 degree, and 90 degree styles. They come in your choice of blue anodized aluminum, "Endura" nickel plated aluminum, or stainless steel.
( 96 )
$129.95
Summit Bucks
Don't take chances. Russell AN to inverted flare fittings are designed to ensure the reliability required in your plumbing project. They're made in an assortment of designs to adapt AN-style fittings to a wide range of inverted flare applications.
( 78 )
$214.95
Make changeovers a breeze with Jiffy-tite transmission kits. Available for virtually all transmissions, they offer you freedom from being showered with tranny fluid--simply unhook the self-sealing, quick-disconnect fittings and the job is done--no leaks, no mess. And you don't need tools to connect or disconnect them, saving you time! These kits are valved, with fluorocarbon seals and valve connections at both the socket and plug assemblies, providing slip-proof connections with minimal flow restriction. Depending on your application choice, the kits may include steel braided lines, reducers, plugs, sockets, and elbows. Be leak-free in seconds with Jiffy-tite transmission kits.
( 3 )
$137.65
Fragola Performance Systems 6000 Series PTFE-lined braided stainless pre-made hoses are manufactured to the highest quality standards for years of trouble-free service. A tough, extruded PTFE inner layer with a smooth bore is fed into a machine that weaves stainless steel wire into the familiar braided pattern. Since stainless steel braided hoses can be abrasive to almost anything they come into contact with, Fragola offers their 6000 Series PTFE-lined stainless hoses with clear or black covers to prevent scratches, scrapes, and scuffs. The properties of PTFE-lined hose make it a natural for highly corrosive applications like automotive brake fluid, hot oil, and power steering fluid; it also handles nitrous oxide with ease. Even under high pressure, it will cycle over and over again without failure. Fragola Performance Systems 6000 Series PTFE-lined hose are available in assorted sizes, lengths, and hose end configurations. Each hose is 100 percent inspected and any flawed sections are discarded. Plus, hose sizes 6-12 AN have a conductive core to dissipate static electricity.
( 141 )
$105.99
FAST engineers set out to develop the ultimate fuel strategy for your EZ-EFI system. FAST EZ-EFI fuel pump hose and fitting kits will handle the task of plumbing your performance build the right way. Kits include: * 25 ft. push lock fuel hose * Two push-on straight fittings * Two push-on 90 degree fittings * Three Gator 1/2 in. clamps
( 2 )
$228.95
Gotta Show Products power steering hose kits are lined with aircraft quality stainless steel PTFE (2500 psi working pressure, 9000 psi burst pressure). The braided stainless steel hoses are cut to fit at the power steering pump end for an exact fit for your application and include the fittings to facilitate installation. Order the power steering hose kit to fit your application needs.
( 3 )
$111.99
—
$124.99
Tanks Inc. offers fuel line kits for GM LS that include the hose and fittings needed to hook up one of Tanks Inc. fuel pumps to an LS engine swap setup. They're designed for LS engine swaps using a single fuel inlet fitting for the fuel source. Tanks Inc. GM LS fuel line kits include: * Fuel pressure regulator/fuel filter combination * 25 ft. of -6 AN twist-lock fuel line * Six straight -6 AN straight twist-lock fittings * Two 1/4 in. NPT to -6 AN straight fittings * Three 3/8 in. female quick-disconnect to -6 AN male fittings * 5/16 in. female quick-disconnect to -6 AN male fitting
( 26 )
$202.99
—
$204.99
Racing Automotive Group adjustable performance fuel logs are compatible with all gasoline types, E85, and methanol. Made from billet aluminum or nickel, the fuel logs are designed for use with a variety of dual feed Holley carburetors—including 4150, 4150 HP, 4160, 4500, and 4500 HP models. They're available with -6, -8, or -10 AN inlets; and -8 or -10 outlets. Most fuel logs adjust between 8 1/2 in. and 11 3/4 in. for necessary clearance.
Not Yet Reviewed
$129.99
—
$139.99
FTI Performance automatic transmission cooler line kits contain the necessary components to add an external cooler when upgrading your transmission and torque converter. They include AN hose, hose ends, and adapter fittings to install your new cooler and keep your street/race machine cool.
( 3 )
$219.00
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$174.99
—
$184.99
Heidts power steering valve fitting kits are designed to hook up your adjustable power steering valve to the power steering system with the pump, rack and pinion, or steering box. Kits include: * 4 straight -6 AN hose ends * 2 straight -6 AN to 1/4 in. NPT adapters * 2 straight -6 AN to 3/8 in. NPT adapters
( 1 )
$118.00
Available in both dedicated and universal styles, these swivel-seal fuel lines from Earl's Performance will solve the fuel delivery problems for anybody using dual-feed Holley carburetors. Dozens of fitment and material options are available, including various fuel line and braided flex line construction choices. The AN and NPT fittings are made from aluminum with an anodized finish for durability. These swivel-seal fuel lines couldn't be any easier to install. Order the part that matches your carburetor specs and keep the fuel flowing efficiently.
( 33 )
$173.95
—
$249.95
On Sale
These Quick Fuel carburetor fuel lines are designed to keep the guesswork out of carburetor hookups. They come available for multiple brands of carburetors and in different forms for a variety of applications.
( 97 )
$130.95
Designed especially for Edelbrock Thunder Series AVS carburetors, these dual-feed lines include chromed steel components and a stainless steel braided line for high-quality looks and performance. Some kits include a great looking polished or anodized filter.
( 25 )
$137.95
—
$153.95
Eddie Marine manual control valves enable fuel flow from the right, left, or both tanks—or can shut off the fuel. These valves are manufactured from 6061-T6 aluminum and are available in a polished finish. They also feature 1/2 in. NPT inlets and outlets for high fuel flow. Note: To help deter internal corrosion of valve components, it's recommended that the valve be periodically lubricated. Valves which fail due to internal corrosion are not covered by warranty.
( 1 )
$186.00
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$127.95
High performance street or race applications call for Jiffy-tite quick-connect 5000 Series fittings for safe, secure fluid connections. Offered in different series to allow you to make the best choice for your flow needs, the 5000 Series range in size from -8 AN to -12 AN, as well as 3/8 in., 1/2 in., and 3/4 in. NPT. Crafted from lightweight 6061-T6 aluminum, brass valves, and stainless steel ball bearings, these fittings are corrosion-resistant to last. Unlike with traditional threaded fittings, Jiffy-tite 5000 Series fittings one-two connections happen in seconds—and with no fluid mess! The fittings provide minimal flow for any fuel, water, or oil system and are offered with buna nitrile seals for those who to choose to burn alcohol and methanol. Get on the fast track to safer, more secure, slip-proof connections with Jiffy-tite 5000 Series quick-connect fluid fittings.
( 4 )
$102.19
—
$108.25
Heidts power steering hose kits are the perfect match to install your power steering pump. Braided stainless steel PTFE hose and the necessary hose ends, clamps, and adapters are included to make your job easier. They come available for integral and remote reservoir pumps with or without power steering valves. Complete your hookup with Heidts Hot Rod Shop power steering hose kits.
( 4 )
$196.00
—
$269.00
On Sale
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride on the strip or street. Fragola Performance Systems offers high performance fuel line kits for the most popular carburetors. These premium fuel line kits consist of strong braided stainless steel lines and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola fuel line kits arrive completely assembled with a high-flow adapter and a special plugged cap with a provision for a fuel pressure gauge. These fuel line kits are designed with an easy system of detachment, allowing you to make quick jet changes at the track. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 31 )
$108.99
—
$115.99
These Aeroquip dual-feed fuel lines will help to deliver the correct amount of fuel to your Holley carb. These quality pieces from Aeroquip not only look good, but they also perform.
( 9 )
$189.99
Waterman Racing shut-off valves are valuable plumbing accessories. Constructed from aluminum with an anodized finish, the valves are available for different inlet/outlet sizes. Order the model needed for your application.
( 1 )
$143.99
Use Jiffy-tite quick-connect 5000 Series hose ends for safe, secure, high performance connections on the street or at the race track. Quick-connect 5000 hose ends are offered in different series to allow you to make the best choice for your flow needs. They range in size from -8 AN to -12 AN, as well as 3/8 in., 1/2 in., and 3/4 in. NPT, and should be used with steel braided rubber hose. Made from lightweight 6061-T6 aluminum, brass valves, and stainless steel ball bearings, Jiffy-tite quick-connect fittings are corrosion-resistant to last. Plus, their fast one-two connection happens in seconds, unlike with traditional threaded fittings--and with no fluid mess! These quick-connect hose ends provide minimal flow for any fuel, water, or oil system and are available with buna nitrile seals for those of you burning alcohol and methanol. You're on the fast track to safer, more secure, slip-proof connections with the right choice--Jiffy-tite 5000 Series quick-connect hose ends.
( 9 )
$102.36
—
$141.98
Earl's Performance LT Gen-V oil pressure sensor kits include special plugs and adapters that are needed when you remove the vacuum pump on GM LT Gen-V 2014-and-up engines. When the vacuum pump is removed, it exposes two passages in the oil galley. These passages are metric straight threads—and they need to be plugged, or used for an oil pressure gauge, or pressure sensor with the Holley EFI system (i.e., Avenger, Terminator X, HP, or Dominator). Choose from an adapter with the 1/8 in. NPT female port, (2) plugs, adapter and plug, or oil pressure sensor for EFI system with plug. Product features: * Vacuum pump delete adapter, plug and sensor for GM LT Gen-V engines * Material: Stainless steel * Metric thread size in block: M12 x 1.75 straight thread with tapered seat * (1) Adapter with female 1/8 in. NPT port; use with sensor * (1) Plug * (1) 200 psi oil pressure sensor with pigtail wiring harness * Ideal for engine swaps and racing applications that don't use the OEM vacuum pump * Sensor is Holley EFI part number 554-103
Not Yet Reviewed
$228.95
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$113.95
—
$114.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
