Availability
Fix your leaking transmission lines with Fleece Performance transmission cooler lines. They are heavy-duty, high flow, flexible transmission lines. Direct replacements for OEM lines, the kits come complete with everything needed to get the job done right the first time. Kits include transmission lines, fittings, and zip ties. If you have an OEM replacement or aftermarket radiator, Setrab fittings may be required (sold separately).
( 9 )
$75.99
—
$329.99
Fleece Performance HP fuel line adaptation kits allows you to upgrade to a newer style pump. Each kit includes a new high-pressure fuel line, high-flow feed and return fittings, and feed line and hose clamps. Convert your 5.9L CP3 to a newer 6.7L CP3-style pump with a Fleece Performance exclusive adaptation kit.
Not Yet Reviewed
$119.99
If you are looking to do an aftermarket turbo setup or compound turbo setup, Fleece Performance A/C line reroute kits are a must. These kits allow you to create additional room to get your kit installed properly and cleanly. Fleece kits provide fitting adapters, hardware, assembled A/C lines, and insulation. Set your turbo up for success with Fleece Performance.
( 1 )
$399.00
Don't ruin excellent engine modifications by putting a new bend in old fuel lines. Fleece Performance high-pressure fuel lines are OEM-quality, look great, and come with M14 x 1.5 fittings. Use them for straight lines, and get one of our quality benders (not included) for perfect angles and a professional appearance. Fleece 8mm high-pressure fuel lines are available in lengths ranging from 7 in. to 24 in.
Not Yet Reviewed
$49.99
—
$569.00
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
Fleece Performance transmission cooler line fittings can assist you with installation or repairs. The special Setrab adapters enable you to correctly plumb your Allison transmission cooler lines or nix unwanted leaks. Order the size and configuration needed for your application.
( 1 )
$19.99
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
—
$99.99
Fleece Performance offers replacement O-rings for all of their Cummins turbo oil drain tube kits. Each service kit contains two O-rings for the drain adapter that inserts into the engine block, and two square-cut O-ring options for the turbo drain adapter (based on your kit).
Not Yet Reviewed
$4.75
Fleece Performance offers fuel injector return line repair fittings for a variety of applications. For instance, the plastic factory injector return fitting on the 2011-and-up 6.7L Powerstroke engines is susceptible to breakage from heat, vibration, rough handling, and frequent disconnections for fuel filter maintenance. Upgrade this fitting and eliminate the risk of a broken fuel line with Fleece's heavy-duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting, these injector return fittings will ensure you're not left stranded with a broken, non-repairable fuel line. Additional details: * Heavy-duty, machined billet aluminum housing * Dual O-ring internal design for increased sealing * Serviceable billet aluminum barb fitting * Easy to install and remove * Sold individually or in a set of 5 * Application notes: Kits are designed to work with both OEM and aftermarket underhood fuel filter assemblies
( 2 )
$64.99
—
$349.95
Upgrade your leaking or corroded heater tubes with stainless steel tubes and a high-temperature silicone hose kit from Fleece Performance. This heater core kit contains everything needed to replace your heater lines from the block to the firewall. It's designed as a direct replacement for all 12-valve Cummins trucks originally equipped with air conditioning. Kit includes: * Stainless steel heater tube - replaces Cummins 3912086 * Stainless steel heater tube - replaces Cummins 3912087 * Silicone heater hose (straight tube to block) - replaces Cummins 3931522 * Silicone heater hose (90 degree tube to block) - replaces Cummins 3957649 * Silicone heater hoses (45 degree tubes to firewall) * Anodized billet aluminum hold-down clamps, billet aluminum standoff, and mounting hardware for both stock and aftermarket manifolds * Hose clamps Application notes: * This kit (S0486) is intended for use with trucks originally equipped with air conditioning. If your truck is not equipped with A/C, you'll need to supply your own 5/8 in. I.D. hose to run from the firewall ports to the stainless steel heater lines. * The silicone heater hose (tube to firewall) may require trimming for certain applications or to accommodate modifications made previously to the engine. * If your truck is equipped with an aftermarket exhaust manifold, the rear heater line standoff will not be utilized and an additional mounting bracket is provided in the kit.
Not Yet Reviewed
$379.00
Get the most fuel flow possible from your stock CP3 pump by replacing the restrictive original inlet fitting with a Fleece Performance high-flow 3/8 in. CP3 return fitting. The larger diameter allows fuel to flow more efficiently—and with a greater volume of fuel available, your CP3 injection pump will be able to perform to its optimum capability. The CP3 fittings are machined from stainless steel, with threads on one end, and a hose barb on the other. A sealing washer is also included to help ensure a tight, leak-free installation.
( 1 )
$15.95
Fleece Performance 1/2 in. CP3 feed fittings are designed to allow for increased fuel capacity to the CP3. These barbed inlet adapter fittings are precision machined from stainless steel and include a sealing washer. For diesel performance parts, nobody knows trucks like Fleece Performance!
( 3 )
$15.95
Fleece Performance Y-barbed fittings can assist you with splitting a feed line, combining two separate fuel sources, and more. They are crafted from anodized billet aluminum and offered in two sizes for use with pushlock hose. Choose the size needed for your plumbing project.
Not Yet Reviewed
$23.99
Fleece Performance AN to straight cut O-ring fittings are just what you need to connect AN fuel lines to AN O-ring ports. These straight cut fittings are manufactured from high-quality aluminum and given a black anodized finish for the sleek, stylish looks you want under the hood. Fleece Performance AN to straight cut O-ring fittings are available in a variety of sizes to join your applications.
( 1 )
$9.99
—
$24.99
Fleece Performance quick-connect fittings allow you to install AN style fuel lines to the factory quick-connect fuel lines. They are constructed out of aluminum and are black anodized for durability and corrosion-resistance. Fleece Performance quick-connect fittings feature a short hex height to maximize installation clearance.
Not Yet Reviewed
$14.99
—
$17.99
.Fleece Performance carries a comprehensive line of fittings to suit just about all of your plumbing needs, including these black anodized aluminum plugs—in male threaded or O-ring style caps. If you need to close off unused or open ports, Fleece Performance plug fittings are the easy and economical solution.
( 2 )
$2.99
—
$9.99
Fleece Performance offers dual pump hardware kits for a variety of diesel trucks. Kits include all the components you need to begin the build of a custom Dual CP3 Fuel System on your 5.9L or 6.7L Cummins engine application. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most of your aftermarket tuning, injectors, and other upgrades. Combine one of these Fleece hardware kits with a CP3 pump, spoked or solid pulley, Fleece fuel distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately). Kit contents: * Cummins common rail Dual CP3 bracket * Cummins heavy-duty dual pump belt * Fan shroud bracket * Dual pump pulley – idler * Cummins dual pump idler pulley spacer * Cummins dual pump controller * High-pressure dual pump line (CP3 to CP3) * High-pressure CP3 fitting and non-return valve * (6) M8 x 1.25 flange nuts * (6) M8 x 1.25 × 50 carriage bolts * M10 x 1.5 x 40mm flange head cap screw * M8 × 1.25 flange head cap screw * M18 x 1.5 CP3 nut Features: * Easy install kit * Exclusive pump to pump line * Increased engine performance
( 1 )
$780.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
