Availability
Showing In Stock Items. Show All 32 Items.
Manley hardened head bolt washers are available for a variety of applications. They receive a special heat treatment to prevent galling.
( 17 )
$14.97
Washers evenly distribute the load of a threaded fastener and without them you won't get the correct head bolt tension. Pioneer head bolt washers offer an exact fit without compromise. These quality made washers feature hardened steel construction and a black oxide finish. Choose quality and value to complement your head bolts with Pioneer washers.
( 2 )
$18.99
On Sale
These Mr. Gasket head bolt washers are designed to ensure equal torque ratings and reduce the chances of damaging your cylinder heads during installation. They are made of heat-treated steel that will provide you with the right amount of protection against leaks, cracking, or other troubling issues.
( 3 )
$25.69
$14.13
—
$32.83
Allstar Performance countersunk bolt kits consist of specially designed washers, either aluminum or plastic, which allow the socket head fasteners to install flush with the surface, creating a smooth, finished appearance. They have many uses, including mounting roofs, spoilers, side skirts, and replacing sharp-edged fasteners inside the cockpit. The kits contain washers, bolts, and nyloc nuts for fastening. Aluminum washers are available with a clear or black anodized finish. Plastic washers are available in a variety of colors. Select the washer material and color preferred for your Allstar countersunk bolt kit.
( 4 )
$81.95
Not your ordinary hardware-store variety of washers. Moroso head bolt washers are designed for the racer. They're machined from tough 4130 chromoly steel, heat-treated to proper hardness, and parallel-ground so that stress loads are more evenly distributed and torque readings are more accurate. They can also be used on main bearing caps, rocker arm stands, and other engine components and can be used over and over again.
( 4 )
$38.99
—
$44.99
Allstar Performance body bolt washers work with most body bolts to increase the surface area, preventing pull-through while providing a smooth finished look. Available in aluminum or plastic, these 1 1/4 in. washers are 1/8 in. thick and have a built-in pocket to accept most body bolts or other washer headed fasteners with up to a 3/4 in. diameter. Aluminum washers are offered with a clear or black anodized finish, and the plastic washers are available in a variety of colors. Select the material and finish/color desired for your fastening project.
( 1 )
$71.99
Meziere rod end safety washers are designed to keep the end from slipping over the retainer bolt. Their unique, tapered profile allows the spherical to travel through an extended range without the limitation posed by using a simple flat washer. They can be used in small linkages and even on large suspension assemblies. Meziere rod end safety washers are offered in your choice of aluminum, 4130 chromoly, or stainless steel. They come in different sizes to fit your specific rod end head bore diameter.
( 11 )
$3.12
Manley hardened washers come in sizes and thicknesses to fit your application. They're available in gold iridited and black oxide finishes. Why not keep some extra on hand?
Not Yet Reviewed
$1.99
To ensure proper torque loads these Trick Flow® cylinder head washers are made from heat treated steel and machined to exacting tolerances. Available in multiple sizes to fit your needs.
( 1 )
$9.99
—
$17.99
Whether you are working on an automotive project or a home DIY project, incorporating Ringbrothers Billet Star Washers can help ensure the safety and reliability of your work. These specialized fasteners feature inwardly projecting teeth on the circumference, providing a greater bearing surface when placed under tension, providing a strong, anti-vibration grip. In addition to preventing loosening, this hardware distributes the load of the fastener over a larger area and provides excellent contact for electrical grounding.
Not Yet Reviewed
$6.75
GUNI lug nut washers work in tandem with GUNI wheel universal bolt/lug pattern wheels to provide an ideal solution for safely mounting and moving vehicles with missing or damaged tire components. While most vehicle OEM bolts and nuts will work with the GUNI wheel, it is strongly advised to check all depth and sizes to make sure the wheel can be tightened to 50 lbs. of torque without causing any damage. Prevent surface damage to your GUNI wheel and reduce the chance of over-tightening lug nuts/bolts when you order GUNI lug nut washers for your GUNI wheel application!
Not Yet Reviewed
$12.99
ARP insert washers are designed to protect the top of the bolt holes from galling or collapsing around studs or bolts. They are fully CNC-machined from premium through-hardened 8740 stock.
( 6 )
$9.99
—
$46.99
If you have a bolt that just won't stay torqued due to vibration, expansion, or other factors you might want to give Nord-Lock washers a try. The wedge locking technology makes it impossible for bolts to loosen unintentionally. Packaged in quantities of 4 or 10, Summit Racing™ offers many common automotive sizes to select from.
( 2 )
$9.99
—
$23.99
ARP quality general purpose washers have an oversized I.D. to clear most under-bolt head radii. They're available in your choice of black oxide or rust-resistant stainless steel for 1/4, 5/16, 3/8, 7/16, and 1/2 in. shank bolts and studs. Whatever the application, these washers are sure to do the job.
( 6 )
$1.99
—
$16.99
Dominator has you covered for any race car body repairs with their selection of hardware. Their aluminum body washers are sold in quantities, offered in styles for use with a 1/4 in. body bolt or Allen head bolt, and are available in a black or milled finish. From nose to tail, Dominator body fasteners will keep your race car together.
Not Yet Reviewed
$35.99
—
$40.99
Hillco stainless steel AN washers help form a dependable fastening system. They're commonly used in any bolt application where two pieces are being drawn together. These heavy-duty hardware accessories are manufactured using high-quality stainless steel that is hardened. Hillco Fastener stainless steel AN washers are available in a variety of diameters, thicknesses, and quantities.
( 1 )
$5.99
Hillco Grade 8 flat washers help form a dependable fastening system. They're commonly used in any bolt application where two pieces are being drawn together. These heavy-duty hardware accessories are manufactured using steel that is hardened and then gold zinc plated to protect the washers from corrosion. Hillco Fastener Grade 8 flat washers are available in a variety of diameters, thicknesses, and quantities.
( 2 )
$5.99
Keep extra hardware on hand with our Summit Racing™ bulk washers. The steel, zinc plated washers are the perfect complements to our Summit Racing™ bolts and nuts. They come available in locking and flat styles, so we're sure to have washers to suit your automotive needs.
( 4 )
$1.99
—
$11.99
Eddie Motorsports introduces a new line of billet aluminum washers to dress up your fenders, core support bolts, and other areas. Lightning washers are machined with a recess to accept socket cap fasteners (available separately). The stylish hardware accessories are available in a wide variety of sizes and finishes--with machined highlights. Decorative, durable, and functional, Eddie Motorsports Lightning washers replace nondescript metal rings with loads of flair!
Not Yet Reviewed
$6.00
The ideal installation of Schroth Racing bolt-in harnesses is when the bracket can pivot on the bolt to allow for perfect geometry. This pivot action allows the force applied on the webbing to dictate the orientation of the bolt-in bracket, achieving the desired positioning of the bracket. Sleeves must be used in conjunction with Schroth Racing flat washers on one side. These are the washers you'll need to finish the setup.
( 1 )
$1.99
Hillco Grade 8 HD flat washers help form a dependable fastening system. They're commonly used in any bolt application where two pieces are being drawn together. These heavy-duty hardware accessories are manufactured using steel that is hardened and then gold zinc plated to protect the washers from corrosion. Hillco Fastener Grade 8 HD flat washers are slightly thicker for added strength and are available in a variety of diameters, thicknesses, and quantities.
( 5 )
$5.99
Hillco stainless steel flat washers help form a dependable fastening system. They're commonly used in any bolt application where two pieces are being drawn together. These heavy-duty hardware accessories are manufactured using high-quality stainless steel that is hardened. Hillco Fastener stainless steel flat washers are available in a variety of diameters, thicknesses, and quantities.
( 2 )
$4.99
—
$5.99
Fasteners are usually the last thing you think of, and the first thing you need; remember Hillco Fastener Grade 2 flat washers for your fastening needs. These hardware accessories provide a larger circular bearing surface, which helps prevent a nut or bolt head from pulling through the material. They're manufactured using durable steel, feature a zinc protective finish, and meet the Grade 2 standard specifications. Hillco flat washers are available in a wide range of diameters, thicknesses, and quantities.
( 1 )
$4.99
—
$5.99
Drag Race Solutions torque converter lock washers are for use on both the head of the bolt and the nut. They can also be used on just the head of torque converters with a 7/16 in. bolt that threads into the converter itself. Don't ruin your expensive transmission or possibly have torque converter bolts come loose and cost you a race. Select DRS lock washers for peace of mind.
Not Yet Reviewed
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
