Underhood Accessories Exterior & Accessories - Systems KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Heatshield Products Cold Intake Cover Systems

Don't let heat rob horsepower from your ride—install Heatshield Products cold intake systems for even more performance! They'll lower the air intake temperatures, creating a denser air/fuel mixture. This mixture burns more efficiently to increase horsepower, improve response time, and boost fuel economy! It can also reduce cylinder temperatures, which can diminish expansion, allowing for more free movement during the combustion cycle—that's a fact, not friction! More Heatshield Products cold intake cover systems features include: * Available to fit various pipe I.D.s and in kits with air box shielding * Rated to withstand 1,100 degrees F reflective continuous use * Capable of withstanding 2,000 degrees F intermittent, and 500 degrees F of direct heat * Reflects up to 90 percent of radiant heat away from your air intake * Hook-and-loop seam provides easy installation and access to your cold air intake * All kits include plenty of heat shield tape to seal edges or seams and add additional protection

Not Yet Reviewed

$82.99

DEI Air Tube Cover Kits

DEI air tube cover kits are designed to prevent air tubes from becoming heat sinks. Made of heat-treated fiberglass with a reflective coating, the air tube covers will reflect heat away from the air tube and allow cooler air to be introduced into the intake for a denser air/fuel charge. They can be installed/removed in seconds without the use of tools by a full-length hook-and-loop closure system. DEI air tube covers are available in a 36 in. long x 14 in. wide that can easily be cut to size for smaller applications.

5.0 out of 5 stars ( 7 )

$62.99

Rhodes Race Cars Billet Aluminum Water Tank Caps

Rhodes Race Cars billet aluminum water tank caps are made specifically to support today's high horsepower turbo/supercharged vehicles with air-to-water intercooled systems. These billet tank caps are available in a variety of configurations and finishes, and come complete with hardware and O-ring for a watertight seal. No need to fight getting ice into your intercooler tank again! With a Rhodes billet aluminum water tank cap it's no longer a problem at all. Features, specs and parts included: * Billet aluminum construction * Natural or black anodized finish, with Rhodes Race Cars logo * Special thread-profile to help prevent cross threading * Ultra-lightweight flush mount design with O-ring seal * Includes necessary mounting hardware for bolt-on installation * Easy turn fill caps are available many sizes and mounting configurations to fit almost any application

4.0 out of 5 stars ( 2 )

$59.95

On Sale

APR Intake Port Covers

APR intake port covers are silicone inserts that seal your intake system from the engine bay. These popular intake covers feature three ports for additional flow and sound, but some have expressed the desire to close these off completely. APR intake port covers are made from flexible silicone, are available in two finishes to match your intake, and they simply pop into place in seconds. Order the finish you prefer.

Not Yet Reviewed

$24.95

$14.06

—

$25.57

Clearance

DEI Silicone Protect-A-Wires

DEI Silicone Protect-A-Wire kits are designed to prevent spark plug wires from burning through and arcing and offer complete heat protection for your spark plug wires. The annealed fiberglass sleeve is coated with silicone to provide excellent resistance to abrasion, fraying, and punctures. The sleeves are resistant to chemicals, extremely flexible, and heat-resistant to 400 degrees F, plus they have high dielectric strength for high-voltage coils and ignition systems. Cover and protect your ignition wires with Silicone Protect-A-Wire kits from DEI. Order the kit you need. DEI kits include: * 3/8 in. I.D. silicone-covered annealed fiberglass sleeve * DEI branded high heat shrink tube ends * Numbered 1 to 8 high temperature shrink tube ends to label plug wires

Not Yet Reviewed

$149.99

$89.50

Funk Motorsports Air Intake Tube Covers

It's important to keep air intake temperatures as low as possible. That's why Funk Motorsports developed lace up induction tube thermal barrier sleeves to reflect up to 80 percent of radiant heat. By maintaining a lower intake temperature, you can provide cooler airflow to the cooling system and MAF sensor, leading to an increased ignition spark and higher output of energy from combustion! Beat heat soak and protect the cool air produced by your intercooler for optimum performance. Each cover has built-in lace-up fasteners and will support any diameter of induction tube. Quick, easy, and flexible to fit!

Not Yet Reviewed

$104.07

APR Engine Covers

The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some vehicles even came with no cover at all due to the fact the flimsy and floppy factory cover could pop off and catch on fire. APR fixed this with a new ridged carbon fiber design that's drop dead gorgeous. Available in Gloss Carbon Fiber Twill, and Exotic Gloss Forged Carbon Fiber, the new covers are sure to turn heads. They match the overall shape and theme of the factory cover, but ooze aesthetic appeal, thanks to the carbon fiber materials, red and black accents, and of course, the world-renowned APR logo plate. The engine covers look right at home in an otherwise stock engine bay, but shine when paired with an APR intake system and matching intake cover. Simply plug and play, no tools necessary! Of course, it doesn't affect emissions, and some on the internet have even suggested the covers may add horsepower, at least more than stickers do Additional features: * Significantly enhances the appearance of the engine bay * Reduces weight by 42 percent over stock (MK8 Version) * Enhances vehicle performance with weight reduction * Reduces weight over the front axles * Optimizes weight distribution * Emissions compliant

Not Yet Reviewed

$460.95

—

$921.95

Edelbrock Supercharged Coil Covers

Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.

Not Yet Reviewed

$463.95

8 Results Found For "Systems"