Availability
Showing In Stock Items. Show All 120 Items.
For that finished, show-car look, Harwood offers this Show series line of bolt-on hoods, featuring a finished underside that looks much smoother than the exposed bracing of many other hoods. They are hand-laid in precision molds by experienced craftsmen to ensure the best possible fit and finish. These bolt-on hoods are also designed to bolt on to the stock hinges and latch mechanism and feature a gelcoat finish on the top and bottom.
( 76 )
$1,149.99
—
$1,185.99
Glasstek offers fiberglass hoods for a wide range of vehicles, including many Chevrolet, Ford, and Oldsmobile models from the 1960s, '70s, '80s, and '90s. These OE-style replacements feature the quality, contours, and fit of the original hood. They're available in different styles and attachment methods. Order the hood recommended for your application.
( 14 )
$1,239.99
—
$1,564.99
Auto Metal Direct hoods are manufactured from steel and are fully coated with EDP to keep the hoods looking great on your ride for a long time. So, if your ride's hood has rust, dents, body filler, or hood scoop holes, just replace it with a brand new, factory-style hood from Auto Metal Direct. All underside bracing and brackets are faithful reproductions of the originals to offer an exceptional fit, authentic look, and value to your vehicle. Don't be fooled by cheap reproductions--demand AMD!
( 626 )
$1,022.99
—
$1,237.50
Goodmark steel stock replacement hoods are ideal for your repair or restoration project. They're available in dozens of styles with stock fitment and features like OE scoops and louvers (where applicable). The hoods are built from high-end steel with a primer or EDP finish. They have fully detailed inner frames for strength and utilize all factory latch and hinge hardware for a true bolt-on design. Most are licensed restoration parts to ensure they'll fit and look as good as the originals. Order the model recommended for your classic car, truck, or Jeep.
( 23 )
$1,155.99
The C6 Corvette reflects power and speed, so keep it that way with Lingenfelter Performance Engineering C6 Supercharger hoods! Each of these hoods features high-quality fiberglass construction to prevent them from feeling flimsy when opened and closed; plus, they sport a smooth finish on the underside for a finished look. Careful attention has been paid to maintain the correct bodylines and hood gaps of each C6 make and model.
Not Yet Reviewed
$1,281.55
Lingenfelter Performance Engineering Signature Series hoods offer performance advantages nonexistent on your stock hood. They are functional featuring Ram Air channels that cool air from the lower slot to an exit that lines up with the Roto Fab air intake kit. They are available with or without the cool, clear polycarbonate window and optional heat extractor panel. Aerodynamic and awesome, Lingenfelter Signature Series hoods give your already exciting modern muscle even more appeal.
Not Yet Reviewed
$1,040.25
Manufacturer Rebate
Get the ultimate protection for your vehicle with Artec Industries JLU DEF skid plates, featuring a heat-treated aluminum skid plate and steel brackets engineered for "unrivaled" heavy-duty strength and quality in off-road protection. Designed from factory CAD files and 3D laser Creaform scan technology for precision and fit, the skids are CNC laser-cut and meticulously crafted from 1/4 in. thick 6061 T-6 heat-treated bare aluminum with 3/16 in. zinc plated steel brackets, delivering extraordinary durability for any terrain.
Not Yet Reviewed
$1,049.99
ARB rock sliders help guard your vehicle's vulnerable lower panels, protecting them from rocks and road debris frequently encountered during remote area travel. The ARB rock sliders also offer the added benefit of improved vehicle access. ARB rock sliders are manufactured from tough, tubular steel with a rich black powdercoat. They're ideal for steep and rocky terrains. Order the sliders recommended for fitment on your off-road vehicle.
Not Yet Reviewed
$1,059.00
—
$1,355.90
Don't let a downpour of rain hinder your ability to see clearly. Detroit Speed Selecta Speed Windshield Wiper Conversion Kits provide you with the performance and convenience of a late model wiper system in a package that easily and cleanly mounts in your classic car. They include a low-profile, 7-speed wiper motor with five delays, low speed and high speed, a rotary switch, an adapter plate, and a wiring harness. The CNC-machined aluminum adapter plate mounts the wiper motor to the stock firewall bolt pattern, so no cutting of the firewall or body is required for the installation.
( 31 )
$1,079.95
Perfect for your classic hot rod restoration, United Pacific 1932 Ford 5-window coupe quarter panels will give you those desired lines with a lot less hassle than piece patching or fabricating. They are available for both sides of the car and come finished with United Pacific Classic-Coat weldable primer. These are complete quarter panels, perfect for getting whole sections of that build or restoration done at a time. Stay true to the design with these steel 1932 Ford 5-window coupe quarter panels--simply bolt and weld the mounting points and your coupe will be cruising in no time.
( 5 )
$1,416.77
On Sale
Brother Trucks' understands how important the quality of bed wood is when you are restoring your truck or getting it ready to show, that's why their Deluxe wood kits offer the highest quality available. Brothers Trucks Deluxe wood bed kits include pre-drilled oak hardwood, polished stainless steel strips, and a polished stainless steel bolt set. The wood has been heat-dried to reduce the amount of moisture retained, making it less likely to separate or disfigure after your installation. The boards are perfectly machined to make sure that they are easy to install; all pieces are 3/4 in. thick and assembled using hand-matched oak, guaranteeing that the grain and color doesn't vary from board to board. Brothers wood sets are pre-drilled and the stainless steel bed strips that run between each of the bed boards are pre-punched, saving you an incredible amount of time and labor. The wood is unfinished, so you can add the finish to match your taste. Available for short beds, long beds, Fleetside, and Stepside models, select the kit designed for your truck. Additional features: * Bed strips are 1 1/2 in. wide, 18-gauge thick, and pre-punched with square holes * Polished stainless bolts come complete with washers and nuts -- Square shank fits into the square holes in the bed strips
( 2 )
$1,499.95
$1,348.95
—
$1,449.95
N-FAB Full Replacement R.S.P. front bumpers offer plenty of protection and rugged good looks. They're made of heavy-duty steel and designed to bolt up to the factory mounts on the frame horns. The one-piece construction will not flex, and the front bumpers can house multiple off-road lights, if desired. To further shield your front-end and undercarriage, the bumpers include a 3/16 in. aluminum skid plate. Order the model recommended for your truck application.
Not Yet Reviewed
$1,149.99
—
$1,249.99
All-Pro Off-Road Baja Series front bumpers have race-inspired "Pre-Runner" styling, and are designed to protect the front-end on select Toyota Tacoma models, as well as improve off-road capability. They also allow for the mounting of up to a 9,500 lb. capacity recovery winch with remote solenoid (use of integrated solenoid winch requires grille trimming). The winch mounting surface on the Baja bumper features the common 10 in. x 4.5 in. bolt pattern used by Warn and other winch manufacturers. Tabs are included for mounting a winch fairlead, and there is also a convenient winch hook loop, on which to place the winch hook and tension the line for storage. Key features and options may include: * Heavy-duty steel tubing with CNC laser-cut and brake-formed 3/16 in. plate steel for winch structure and mounting plates * Sides wrap around the fenders, and there's a bottom hoop that serves as protection for the low hanging radiator with an integrated steel skid plate * High-clearance design with improved approach angles * Optional "Baja Taco" headlight hoops and filler plates * Bolt-on installation (except on 1998-2000 models) * Integrated skid plate * Integrated winch and fairlead mounts * Heavy-duty recovery points * Light mounting tabs to mount up to 6 in. lights * Lower radiator protection (may require shorter 4-cylinder radiator to install) * Hardware included * Winch not included (sold separately) * Bumper ships bare steel
( 2 )
$1,049.99
—
$1,199.99
Auto Metal Direct wider tub truck bed floors will save you a lot in labor over modifying a factory spec floor to accommodate wider tubs, reducing fabrication time and providing a cleaner OE appearance in your truck. These reproduction assemblies with accommodation for 4 in. wider wheel tubs are stamped from high-quality, heavy-gauge steel. Each comes complete with cross sills, tail panel, and reinforcements already attached. Made on all new tools, they feature a one-piece OE correct bed floor skin and provisions to directly bolt AMD's 4 in. wider tubs and arrives EDP coated to help protect against rust and corrosion prior to installation. Choose the floor designed for your vehicle. Please note: These floors will not work with the factory width wheel tubs.
( 1 )
$1,385.99
—
$1,435.49
United Pacific offers an extensive line of parts and accessories for vintage vehicles, including these Ford truck cab back panels. They are exact replicas of the die-stamped originals, with precision punched carriage bolt holes to OE specs for cab back wood mounting. These panels are finished with black EDP protective coating to keep your new steel fresh and rust-free. Order the model designed to fit your application.
Not Yet Reviewed
$1,382.66
Get the most out of your truck with Thule TracRac utility racks. Constructed from lightweight and corrosion-resistant aluminum, each rack system has a durable silver powdercoat finish, can be easily removed, and features the highest weight capacity rating on the market: 1,250 lbs.! Each sliding upright is specific to the height of your cab, and slides on one of four 24 in. base tracks that bolt to your truck bed. This allows you to adjust the rack to accommodate different length loads, while also allowing for quick removal of the uprights when they aren't in use. Each upright comes with quick-release knobs for easy sliding, as well as tie-down points for securing loads. The overhead crossbars are aerodynamically designed to prevent drag and eliminate noise, and they come equipped with load stops that easily adjust to the full width of the crossbar. Each model includes two uprights, two crossbars, and four load stops. Thule TracRac utility racks are available in two styles: short (17 in. H without crossbars, 21.50 in. H with crossbars); and tall (22 in. H without crossbars, 26.50 in. H with crossbars). All are backed by Thule's limited lifetime warranty.
Not Yet Reviewed
$1,099.95
When it comes to strong protection for your truck without a lot of bulk, Fab Fours Black Steel Pre-Runner Series bumpers are a great option. These 14-gauge steel tread plate bumpers feature a gloss black powdercoat for corrosion resistance. Each unit also includes brush guard and front tube for toughness and safety, plus steel mesh-covered cutouts for the factory fog lamps. The grille guard uses 2 in. diameter tubing, while the wings are 1.750 in. Each bumper is matched to the body lines of the specific make/model for an excellent wrap-around fit and comes with tow hooks. For modern style, combined with excellent performance on and off the road, bolt on a Fab Fours Black Steel Pre-Runner front bumper.
( 1 )
$1,466.99
Body Armor 4x4 Toyota Pro-Series II rear bumpers will boost the looks and functionality of your truck. Each bumper offers a little something different designed for the vehicle, but all are constructed from high-strength steel and finished with a 2-stage light texture black powdercoat for durability and resistance to the elements. And with bold, modern aesthetics and optimum functionality, Pro-Series II rear bumpers enhance your vehicle's appearance while seamlessly aligning with OE body lines. They are also modular in design, allowing you to add a single or dual tire/accessory swing, if you wish later. Select the Pro-Series II bumper designed for your Toyota. Additional rear bumper notes: * Integrated shackle recovery mounts for secure towing * Accommodates 2 LED pods or flush mounts * Accommodates the factory receiver * Easy bolt-on installation, no drilling required * Durable two-stage light texture black powdercoat * Kits include rear bumper and all necessary bolts, nuts, and washers for installation * Blind Spot Monitoring (BSM) will need to be deactivated
Not Yet Reviewed
$1,162.00
—
$1,484.00
ARB skid plates are just the thing for protecting your rig from that challenging off-road terrain and unexpected obstacles that cause the most damage beneath your vehicle. The skid plates are designed to shield all of your vehicle's vital underbody components from end to end—to ensure that your steering, oil pan, tranny, and transfer cases will all be safe during every trail adventure. You're "rock ready" with ARB bolt-on skid plates! Additional features and details of ARB skid plates include: * Manufactured from laser-cut steel, zinc plated with a powdercoat finish * Press-formed and expertly folded for optimum strength to weight * Recessed mounting bolts and openings or easy-to-remove panels—so your vehicle can be easily serviced * Skid plates are model-specific; order the one designed for your vehicle
( 3 )
$1,022.00
Warrior Products standard bumpers are designed to accent factory styling cues and to add an OE-look to your vehicle. Warrior bumpers are offered for front and rear, as well as with or without receivers, D-ring mounts, winch mounts, and brush guards. Their selection is sure to meet your wants and needs. The standard bumpers bolt on, and are fabricated from steel with either a durable black powdercoat or chrome plated finish. Select one you like that's designed for your vehicle.
( 1 )
$1,003.99
—
$1,511.99
Manufacturer Rebate
Artec industries High-Clearance Comp front bumpers are available for a variety of Jeep applications. The bumpers are fabricated from CNC laser-cut steel for ultimate resilience and include a sleek aerospace-grade skid. They also feature superior clearance, an integrated winch mount—and a robust grille guard hoop (some models only). Features and benefits: * Offers increased clearance and an improved approach angle, complemented by an integrated fairlead mount * Constructed using 1/4 in. and 3/16 in. CNC laser-cut and formed steel * Installation requires drilling and cutting 5.25 in. off the front frame horns, enhancing the approach angle * Features high clearance that bolts directly to a modified frame, anchored by an internal PEM plate * Incorporates a winch mount, crafted from 1/4 in. thick steel, ensuring enhanced rigidity * Designed with internal gussets and is directly tied to shackle mounts, delivering unmatched strength * Boasts shackle mounts made of 3/4 in. thick high-strength alloy steel * Features a 3/16 in. aerospace-grade aluminum bash skid, meticulously machined for countersunk hardware, ensuring a sleek finish * Skillfully contoured to provide an optimal approach angle and ample tire clearance * Offers multiple sway bar mounting solutions, though it's worth noting that the OEM electric sway bar is not compatible * Boasts an approximate total weight of 55 lbs. (or 65 lbs. with hoop) * The distinctive bull bar hoop is crafted from sturdy 1.75 in. DOM tubing (some models only) * Large plate steel gussets reinforce the hoop, adding both strength and style (some models only)
Not Yet Reviewed
$1,299.99
Manufacturer Rebate
In addition to the style cues of the Artec Nighthawk Series bumpers, they are tough and built to be extreme. The Nighthawk Series bumpers are offered in applications to fit the front or rear location on your vehicle to better suit your needs. Select the model designed to fit your application. Front bumper features: * Front bumpers are made from CNC laser-cut and formed steel * Internally gusset bumper for ultimate strength * Compatible with LED square style or OEM LED fog lights (plastic bumper version LED lights only or JK style aftermarket; lights sold separately) * Large plate steel gussets add strength and style * Available in bare steel to allow customizable color coordination or in black powdercoat finish * Contoured for maximum approach angle and tire clearance * Winch plate made from thick formed steel for supreme rigidity * Thick Rock Guard available in aerospace aluminum * No more drilling required to mount skid plate * Stinger made from 1.75 in. DOM tubing for strength * Thick high-strength alloy steel shackle mounts Rear bumper features: * Made in the USA from 3/16 in. CNC laser-cut and formed steel * Available in bare steel to allow end user customization and color coordination * High clearance design hugs factory frame for more clearance and departure angle * Choose to include factory park sense sensor holes or not * No vehicle modifications needed—bolts right up * Integrates with factory receiver hitch * LED license plate lights included on select bumper models * Contoured to perfectly fit the subtle curves of your Jeep * Utilizes factory tow hooks for a clean and OEM look (additional hooks can be purchased through dealer)
Not Yet Reviewed
$1,099.99
UnderCover Elite tonneau covers feature a completely new design, adding a handle to the back, a bolt lock cylinder, and a brighter, removable LED light. The new handle is easy to use, ergonomically correct, and the OE design matches the look of the new trucks. They provide a secure, full-perimeter, weathertight seal to protect your valuables from the elements. UnderCover Elite tonneau covers lift smoothly and close easily with their strong nylon pull strap--a real bonus on taller trucks!
( 6 )
$1,299.99
Rock Slide Engineering Overland deluxe rack kits make great additions to your vehicle whether you're using it as a daily driver or weekend overlanding rig. The racks are made from 11-gauge steel, finished with a durable powdercoat, assemble easily, and bolt directly to the factory rail mounting system in your bed. They are compatible with various rail mount roll-up tonneau covers giving you the flexibility to carry cargo and gear in your truck bed, as well as multiple mounting and tie-down points found on the rack. Rock Slide's Overland Deluxe racks come with flip-up sides that provide space to mount gear and offer easy access to the bed. They are also designed with removable top crossmembers for those times you need to transport taller gear in the truck bed and have convenient grab handles at the rear of the racks making them easier to climb in and out of the truck bed area. Rack kits include: * Two flip-up sides * Two crossmembers * Mounting hardware * Limited Warranty
Not Yet Reviewed
$1,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
