Availability
Showing In Stock Items. Show All 54 Items.
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 245 )
$1,430.99
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$1,653.99
—
$1,736.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$1,617.99
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$1,049.95
—
$1,349.95
On Sale
Performance is most important, but looks ... well, they're important, too. XForce exhaust systems are uniquely engineered and designed to deliver both desires, plus great audio notes. These direct-fit components are fabricated from 304 stainless steel and offer unrestricted flow to fit your ride with increased power, bolder sound, and fabulous looks. You'll have what you want for your car or truck with an easy, bolt-on upgrade XForce exhaust system. Order the size, style, and configuration recommended for your application.
( 66 )
$1,125.00
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$1,552.99
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 931 )
$1,012.99
—
$1,733.99
Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.
( 131 )
$1,129.99
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 280 )
$1,016.99
—
$1,655.99
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 539 )
$1,087.99
—
$1,496.99
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$1,149.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 607 )
$1,027.00
—
$1,460.00
MagnaFlow Touring Series performance exhaust systems are an ideal choice for those seeking increased performance and better economy. Their straight-through flow designs deliver the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. An engineered balance of interior and exterior noise levels, these kits offer the smooth, deep sound you want—and the wide-open power you need! Touring Series systems feature 409 stainless steel components, all mandrel-bent tubing, and a lifetime construction warranty; they're tested against SAE j1169 standards. MagnaFlow Touring Series performance exhausts are available in numerous configurations, including cat-back and rear axle-back; single, dual, tri, or quad mufflers; and several outlet and tip options. Order the model tailored for fitment on your specific vehicle.
( 17 )
$1,004.00
—
$1,521.00
Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.
( 289 )
$1,173.99
—
$1,423.99
MBRP Pro Series exhaust systems are built for performance auto enthusiasts looking for a great quality exhaust. They're constructed from T304 stainless steel for optimal durability and reliability. Pro Series systems deliver a rich, mellow exhaust note and over 70 percent increased exhaust flow. They include the necessary pipe and muffler, and utilize OEM hangers for complete bolt-on cat-back (or downpipe-back) exhausts. These kits are available with polished stainless steel exhaust tips or carbon fiber exhaust tips for a beautifully finished look. These units are available in a variety of configurations for gas truck/SUV, diesel, and muscle car applications—so you can choose which design is best for your vehicle. MBRP offers a no-hassle lifetime warranty on Pro Series exhaust systems.
( 50 )
$1,284.99
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 45 )
$1,149.95
—
$1,249.95
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,199.95
—
$1,299.95
On Sale
XForce Varex exhaust systems deliver the power, sound, and style you desire. Fabricated with the strength and beauty of 304 stainless steel, they're also designed for unrestricted flow and high performance. The systems feature XForce's patented muffler innovation, Varex, that's engineered with sophisticated butterfly valve mechanisms. This allows you to select optimal power output and sound levels to meet your desired preference by directing the flow of exhaust gases. You can choose to purr in street mode, roar in racing mode, or growl somewhere in between. XForce Varex exhaust systems look fabulous and hand the control of power and sound to you. Order the style, size, and configuration recommended for your vehicle.
( 51 )
$1,597.50
On Sale
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$1,008.90
—
$1,529.50
On Sale
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 75 )
$1,149.95
NXT Step Performance exhaust systems offer improved performance and sound. NXT Step all-stainless steel systems feature polished T304 materials, and mandrel bends for maximum flow and power. The systems are finished with double-walled, beveled-edge polished tips. NXT Step high-performance systems are tested to meet their high standards for sound quality, fitment, and performance before they are brought to the streets or the track. From axle-back to full race header back systems, NXT Step Performance exhausts are ready to deliver maximum flow, increased horsepower, and exhaust note without resonance for your Corvette, Camaro, or Mustang.
( 29 )
$1,034.99
Every car needs an exhaust system to remove the gases from the engine that have been caused by combustion. While their purpose is virtually the same, not every exhaust system's performance is. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. Axle-back and cat-back systems; polished, burnt, and carbon fiber tips, are just some of the offerings available for popular performance car, truck, and SUVs. Each one is crafted from 304 stainless steel for the specified vehicle, and designed to increase the performance, sound, style, and enjoyment of your driving experience. Select the Stillen exhaust system designed for your vehicle.
( 1 )
$1,165.81
—
$1,627.04
Summit Bucks
Refined from four decades of on-track competition, Vance & Hines stainless steel 2-into-1 Upsweep exhaust systems look and act the part. Hand TIG-welded of high-grade 304 stainless with a brushed finish, they are engineered to maximize torque and power out of the Milwaukee-Eight powerplant. Features include: * Oversized 2-into-1 merge collector * Megaphone muffler * Race-inspired heat shield * Fits forward and mid control models
Not Yet Reviewed
$1,299.99
aFe Rebel Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Rebel Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation with most applications requiring no modifications. Rebel Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. Depending on the specific application, they are constructed of 304 or 409 stainless steel and include black or polished 304 stainless steel tips (intercooled for diesels) with a laser-cut stainless steel aFe power badge. Key features of aFe Rebel Series exhaust systems include: * Cat-back, axle-back, downpipe-back, and DPF-back systems * Many systems have dual tips that exit in front of the rear passenger side tire for a unique custom look * Aggressive or mild tone mufflers available (varies by model) * OE-style bayonet hangers stabilize pipe location * Bayonet tips hold hanger bushings in place for a durable fit * 360-degree sealing surfaces for leak-free performance * Select systems have high-temperature, metallic black coated mufflers for the ultimate in corrosion protection Note: Some aFe Rebel Series exhaust systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 7 )
$1,006.95
—
$1,242.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
