Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1987 Exhaust
Showing In Stock Items. Show All 78 Items.
Hedman Street Headers
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2482 )
$500.99
—
$709.99
Hedman Elite Extreme-Duty Headers
If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.
( 394 )
$532.99
—
$738.99
Patriot Clippster Headers
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 308 )
$531.55
—
$651.95
JBA Performance Exhaust Cat4ward Headers
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 493 )
$510.85
—
$637.10
Sanderson Headers
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 292 )
$509.11
—
$700.11
On Sale
Flowmaster American Thunder Exhaust Systems
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 548 )
$699.95
—
$749.95
On Sale
Flowtech Headers
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 995 )
$511.95
—
$631.95
On Sale
Hooker LS Engine Swap Headers
Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.
( 11 )
$999.95
$562.95
—
$666.20
Pypes H-Bomb Exhaust Systems
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 24 )
$549.79
—
$697.79
On Sale
Hooker Competition Headers
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 948 )
$1,049.95
$592.26
—
$716.95
Schoenfeld Headers
We won't go into a song and dance about Schoenfeld headers. They've been on championship-winning cars for a lot of years. Since we carry the whole Schoenfeld line, we can get you any header they make. If you don't see yours listed, please call. Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 132 )
$506.99
—
$648.99
Patriot Full-Length Street Rod Headers
Patriot full length street rod headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which result in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing that's available in your choice of bare or ceramic coated finishes, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 13 )
$679.00
Hooker Exhaust Manifolds
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 37 )
$511.95
Patriot Full-Length Headers
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 188 )
$604.75
—
$700.25
Schoenfeld Truck Fenderwell Exit Headers
Schoenfeld truck fenderwell exit headers are the solution for your mud, off-road, or pulling truck. Manufactured from heavy-gauge steel to withstand the heat, these headers provide maximum ground clearance without exiting through the hood. They are available in multiple header flange styles to suit your exact build—order the application you need. (Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 3 )
$561.99
Hooker Super Competition Cat-Back Exhaust Systems
Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.
( 41 )
$614.95
—
$665.95
Hedman Specialty and Engine Swap Headers
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$592.99
—
$749.99
Flowmaster Force II Exhaust Systems
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 232 )
$511.95
—
$636.95
Summit Racing™ Metallic-Ceramic Coated Headers
They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.
( 426 )
$519.99
Sanderson Headers Blockhugger Headers
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 308 )
$509.79
—
$740.89
On Sale
Flowtech Shorty Headers
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 89 )
$799.95
$532.95
Doug's Headers Stainless Steel Headers
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 29 )
$702.35
Hedman Hot Rodz Engine Swap Headers
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 71 )
$582.99
—
$676.99
NXT Step Performance Exhaust Systems
NXT Step Performance exhaust systems offer improved performance and sound. NXT Step all-stainless steel systems feature polished T304 materials, and mandrel bends for maximum flow and power. The systems are finished with double-walled, beveled-edge polished tips. NXT Step high-performance systems are tested to meet their high standards for sound quality, fitment, and performance before they are brought to the streets or the track. From axle-back to full race header back systems, NXT Step Performance exhausts are ready to deliver maximum flow, increased horsepower, and exhaust note without resonance for your Corvette, Camaro, or Mustang.
( 12 )
$748.99
