Availability
Showing In Stock Items. Show All 42 Items.
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 69 )
$352.99
—
$635.99
Schoenfeld S-10 forward exit conversion headers fit your small block Chevy engine. These steel headers exit at front mid-fender. They are shipped with a temporary non-high-temperature paint to protect the headers and they are available with standard, spread port, or 18 degree flanges.
( 8 )
$466.99
On Sale
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$164.95
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 349 )
$288.05
—
$651.95
$259.24
—
$586.76
At the "heart" of any performance vehicle is the exhaust system. Hooker Blackheart LS swap exhaust systems are engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality. These Blackheart LS systems are offered in three different configurations, and bolt-up directly to existing Hooker Blackheart mid-length headers (sold separately) for a hassle-free installation with an impressive sound sure to turn heads! Features and benefits include: * Constructed from lightweight, 18-gauge, mandrel-bent 409 stainless steel for maximum strength and durability * Dual 409 stainless steel high-flow, straight-through muffler design * Available in three different configurations: Dual 3 in. inlet/single 3 in. out, dual 3 in. with turndowns, or dual 3 in. inlet/dual 2.5 in. out (rear exit) * 100 percent quality hand-welded construction for strength, longevity, and good looks * Designed for use with other Blackheart S10/Sonoma LS swap products * Utilizes OEM mounting points for factory-like fitment * Tube geometry designed for maximum clearance and hassle-free installation * All hardware included
( 1 )
$699.95
Got an exhaust job? Finish it like a pro with Walker U-bolt clamps. They are manufactured from premium steel for greater strength and durability. They are offered in standard and flat strap styles as well as heavy-duty with or without welded saddles. No matter which style of Walker U-bolt clamps you need, they are all designed for one purpose--to clamp your exhaust together with leak-free performance!
( 96 )
$1.99
—
$2.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 990 )
$324.95
—
$337.95
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2445 )
$302.99
—
$857.99
On Sale
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$217.95
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 183 )
$406.99
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$499.95
—
$513.95
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 288 )
$496.19
—
$614.90
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 186 )
$119.00
AP Exhaust universal catalytic converters will work to make your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering comprehensive coverage, AP Exhaust can provide universal catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust universal catalytic converters offer the quality, fit, and value to meet those concerns.
( 6 )
$72.99
—
$98.99
Don't take chances with old, questionable, or faulty catalytic converter check valves that can cripple your vehicle's emissions system. Standard Motor Products replacement converter check valves are designed to exceed OEM specifications for dependable, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor Performance.
Not Yet Reviewed
$21.99
ACDelco Gold secondary air injection pump check valves are high-quality aftermarket replacement components for your emission system. These premium steel check valves are manufactured to meet or exceed your expectations for fit and performance. They're available for countless vehicle applications from the 1960s and up
Not Yet Reviewed
$21.99
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$480.00
Secure your exhaust pipes together with AP Exhaust U-clamps. These standard-duty units are made from strong steel and are available to fit a range of pipe diameters. Repair your existing exhaust or install a new one with the reliable leak-free performance of AP Exhaust U-clamps.
( 54 )
$2.99
Walker provides the hardware and accessories to help finish the job faster and easier. Their exhaust hangers feature OE-style design for ease of installation and a properly completed exhaust repair. The hangers are engineered for durability and long service life. Do it right. Do it the Walker way with the Walker exhaust hangers designed for your application.
( 320 )
$5.99
—
$8.99
Catco universal-fit catalytic converters offer great features, including aluminized steel heat shields (many have dual shields), 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat—all of which help the converters last longer. These converters are designed so that you can add one to any vehicle that wasn't originally equipped with one. Many models have steel air tubes with numerous perforations to help distribute the airflow evenly without robbing power, and most have slip-fit connections for an easy installation. Choose the inlet/outlet diameters needed for your application.
( 7 )
$145.99
When assembling your exhaust system, look to AP Exhaust for just the right components, including steel-constructed flanges. They're available in a variety of sizes, types, and bolt patterns for fitment on many applications. Ensure a more accurate, leakproof seal by pairing AP Exhaust flanges and flange gaskets (sold separately).
( 72 )
$7.99
Dorman control duct pre-heater hoses are flexible, strong, and easy to install. They're high-strength fiberglass/aluminum construction helps to prevent cracking. They offer an expandable adjustable fit, that can be easily cut to your desired length, and no special tools are necessary. Available in a variety of diameters, Dorman HVAC control duct hoses help return your vehicle's HVAC system to its original performance. Plus, they're suitable for many different automotive, household, and workshop uses.
( 9 )
$4.99
These Standard Motor AIR pump check valves are one-way airflow control valves in the air supply tubes to the exhaust system. They are designed to prevent exhaust gas backflow into the air pump system. The valves can also be used in the air tube to the 3-way catalytic converter.
( 8 )
$11.99
AP Exhaust hangers are precision engineered for easy installation. They're available in hundreds of configurations, as well as a variety of sizes and materials, to hold your exhaust system safely and securely.
( 99 )
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
