Availability
Showing In Stock Items. Show All 22 Items.
On Sale
Keep your plug wires properly protected from extreme underhood heat with Summit Racing™ spark plug boot heat shields. Our plug wire boot shields are inexpensive, extra protection from damaging heat-generating sources. Protect your plug wire boots and increase their lifetime. They offer an easy, snap-on installation.
( 6 )
$34.99
$31.99
—
$33.99
Increase the efficiency of your ignition system with ACDelco spark plug heat shields. They offer maximum protection from conductive and radiant heat, providing strain relief and vibration resistance. The boot protectors are GM-recommended OE replacement parts, compatible with a wide range of makes and models. These steel snap-on accessories prevent lasting damage to your spark plug wires.
( 6 )
$4.99
Many Class C motorhomes and box vans suffer from excessive heat in the floorboards and doghouse. An interior heat shield can significantly reduce heat transfer to the interior. Heatshield Products RV Stealth Shields reduce interior temps as much as 20 degrees F, keeping your feet cooler and helping the A/C to work more efficiently. And Stealth Shields will not cause floor mat or carpet fitment issues. Travel in comfort! * HD Stealth Shields are a custom-fit kit that significantly stops the amount of interior heat. Unlike jute padding, the Stealth Shield is designed to displace the thermal energy generated through the doghouse and floorboard. At only 1/8 in. thick, it will not cause fitment issues for carpet, rubber mats, or headliner panels. * In addition to RVs, Stealth Shield kits also work great on cutaway chassis applications and heavy-duty trucks, box vans, shuttle busses, and more. Heatshield Products offers complete kits, kits for floor mats only, and a kit to install behind the factory doghouse heat shield. The universal sheet can be used above a headliner to reduce even more heat.
( 2 )
$140.99
—
$220.99
ACDelco starter heat shields meet or exceed OEM part specifications and are designed to deliver the fit, function, and performance of the original equipment. Choose replacements with a name you know and trust--ACDelco.
( 1 )
$21.99
—
$24.99
DEI Floor and Tunnel Shields II add a new dimension to heat control with minimal clearance needed--only 3/16 in.! Constructed utilizing an embossed aluminum face bonded to a composite fiberglass insulation and backed with an aggressive adhesive that holds past 450 degrees F, these barrier sheets are capable of handling direct temperatures up to 1,750 degrees F. The shields are tough enough for under-vehicle applications. They're also great as a sound barrier, blocking out up to 50 percent of unwanted road noise. DEI Floor and Tunnel Shields II can be cut with tin snips to any shape needed for your application. (Note: Some shields use spray-on adhesive.)
( 67 )
$113.99
Heatshield Products Lava oil filter heat shields help you avoid cooking your oil filter and the oil running through it, while protecting the filter from road debris. These shields encase the oil filter in proprietary Lava Cool volcanic rock fiber-based thermal barrier material. Each specially designed cover slides over the filter snugly and is held in place by magnets so it won't slip off. The magnets are effective at trapping metal debris inside the oil filter, further improving the filtration and offering your engine more protection. Available in sizes to fit most popular canister oil filters, these heat shields can withstand constant temperatures of 1,200 degrees F and intermittent temperatures of up to 2,000 degrees F. They're oil-,solvent-, and water-resistant.
( 7 )
$83.99
Tired of feeling the burn from your off-road machine? DEI Powersports heat control kits shield the heat and increase the riding comfort for you and your whole crew. The kits include precision-cut, adhesive-backed pieces that reduce console and seat temperatures, block radiant heat in the cup holder(s), and reduce engine noise and vibrations. Installation is straight forward, and no modifications are needed for installation. Choose the kit(s) designed for your ATV, UTV, or Side x Side.
( 2 )
$199.99
Heatshield Products Lava motor mount shields wrap around any factory or aftermarket engine support to create a thermal and acoustic barrier. This protects against motor-generated heat, along with other ambient elements that can reduce the longevity of your mounts. The shields can be used on both street and strip applications, allowing owners with high-horsepower engines to install supports strong enough to withstand their builds—while offering a vibration-free and smooth feeling similar to an OEM mount. Additional product features: * Easy installation (typically no need to uninstall the mount) * Made from crushed, melted, and then fibered volcanic rock * Designed to withstand continuous temperatures of 1,200 degrees F and intermittent 2,000 degrees F * Water, chemical, and acid-resistant * Protects rubber, polyurethane, and poly-graphite mounts
Not Yet Reviewed
$54.99
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$95.95
—
$284.95
Heatshield Armor exhaust heat shield insulation keeps heat in the exhaust system, which creates a scavenging effect, allowing exhaust gases to flow out of your system faster. Plus, it prevents radiant heat from entering your driver's compartment and stops damage to other vehicle components by reducing radiant heat from your exhaust pipe by up to 60 percent. This product features BioCool insulation that makes it capable of withstanding 1,800 degrees F continuous and 2,200 degrees F intermittently. Installation takes only minutes, plus the outside layer resists the elements and accepts cleaning for prolonged life. Choose from a large selection of thicknesses, widths, and lengths to match your application and wrap your pipes for performance with Heatshield Armor exhaust heat shields.
( 84 )
$169.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$182.81
—
$326.95
Dorman exhaust manifold heat shields allow you to replace a loose or missing exhaust manifold heat shield without replacing the manifold itself. Dorman's direct replacement heat shields are dimensionally verified to match the original and undergone material testing to ensure a reliable service life. Order the exhaust manifold heat shield suited to fit your needs.
Not Yet Reviewed
$51.99
—
$63.99
Stick on horsepower! Heatshield Products I-M shields reduce heat radiating from the top of the motor significantly. This creates a more dense fuel and air mixture, in turn creating more power. Think of them as intercoolers for your intake, with the same physics and chemistry, but just a different execution. They include heavy-duty adhesive that will stick to any clean, semi-smooth surface. Simply degrease and clean the surface, wipe it with pre-paint cleaner or isopropyl alcohol, let it dry, and then firmly press the Heatshield Products I-M shields onto the underside of the intake manifold. Features include: * Withstands 1,100 degrees F radiant continuous, 2,000 degrees F intermittent * Adhesive good for 300 degrees F * Lower intake temperatures * Increases up to 12 RWHP
( 27 )
$96.99
COBB Tuning turbo blankets not only look cool under the hood of your vehicle, but they also offer multiple benefits that can be found on both sides of the blanket. Obviously, they help prevent the turbo from heat soaking neighboring components in the engine bay, but the real magic happens on the underside. With a turbo blanket installed, the turbo RPM acceleration improves, which leads to faster turbo spool and being able to achieve peak torque more quickly. This insulation also helps reduce heat-related wear, potentially improving the longevity of the turbocharger and other engine parts. Order the blanket designed for your make/model. Key features and benefits: * Turbo blankets are constructed with a fragmentized fire-retardant volcanic rock outer layer * Turbo blanket insulates the turbine housing, and act as a shield, preventing the high heat from the turbo from dissipating into the engine bay and damaging sensitive components like rubber and plastic hoses, wiring, and painted surfaces * Designed to limit the amount of heat that is transferred from your turbocharger to your engine bay, as well as keeping hotter exhaust gases that exit the system faster through decreased density * By limiting the amount of transferred heat can help extend the life of underhood components, decrease intake temps, and improve the response from your car
Not Yet Reviewed
$215.00
Precision laser-cut stainless steel ensures that COBB Tuning Subaru turbo heatshields can withstand years of abuse. They significantly diminish the venting of heat from exhaust gas temperature into the engine bay … reducing heat soak into key components that benefit from cooler ambient temperature, such as the intercooler. COBB Tuning stainless steel heat shields are designed in-house and are replacements for the factory turbo heatshields found on many turbocharged Subarus. Additional features of COBB Tuning Subaru turbo heatshields: * Works with stock or aftermarket downpipes * A modification that goes hand-in-hand with an aftermarket downpipe * The COBB logo is laser-etched and can be clearly seen--no matter how much heat is being deflected * A great addition to show cars and race cars alike NOTE: Designed for stock turbo applications only.
( 1 )
$99.00
DEI offers custom cut floor insulation kits to insulate your work or adventure van creating a more enjoyable driving and living experience. Custom designed specifically for Ram ProMaster/Ford Transit/Mercedes Sprinter, these insulation kits quiet your drive from annoying vibrations, rattles, and road noise while thermally enhancing your vehicle from extreme temperatures. CNC custom cut kits include insulation pieces for each specific area of your interior. This reduces installation time and gives the right solution to properly insulate your van. Boom Mat damping material kits eliminate squeak and rattles, and spray adhesive to complete installation. Detailed instructions included to make installation simple. Select the custom floor insulation kit for your vehicle make/model. Product Overview: * Each floor insulation kit is custom designed specifically per vehicle make and model * Custom cut 30mm thick D-Mat insulation controls, heat, cold and absorbs noise—the custom crafted pieces are measured and precisely cut using in-house waterjet machines, so that kit fits right the first time * Damping material eliminates, vibrations, squeaks and rattles * D-Mat material is a polymer blend packed with dense fibers to minimize noise and vibrations while insulating the vehicle from heat and cold * Environmentally friendly—D-Mat material is mildew and bacteria-resistant, and contains no chemicals or odors * Unlike fiberglass insulation, D-Mat is not itchy, nor does it release harmful fibers into the air, additionally, the material is hypoallergenic, recyclable, and designed for use in vehicles of all types * Economical insulating solution—offers dynamic insulating capabilities * Comfortable interior at any temperature * Quick and easy installation—simply follow the easy-to-use DEI template by matching the number on the diagram with the number on the individual insulation piece * Passes FMVSS-302 flammability test—D-Mat material meets both Federal Motor Vehicle Safety Standards FMVSS 302 and Canadian Safety Standard CMVSS 302 for flammability
Not Yet Reviewed
$109.99
Heat from your bike's exhaust system can become uncomfortable, especially riding in slow traffic. This issue really comes into focus for those with shorter legs, as well as the reluctance to disrupt the attractive lines and appearance of your motorcycle's exhaust. DEI heat shield liners insulate the outer heat shield without disturbing the looks of your bike. Each piece is precision cut to fit in-between the exhaust pipe and the heat shield, blocking heat transfer and lowering the surface temperatures of the outer shield. The kits are easy to install with no permanent modifications needed and feature dual-layer aluminum construction along with DEI's proprietary Dura 2000 insulating material that offers over a 60 percent reduction in heat. Choose the heat shield liner kit designed for your motorcycle. Additional features and benefits: * Reduces heat radiating from exhaust system giving the rider and passenger a cooler ride * CNC-cut for a perfect fit * Installs inside factory shield to be completely hidden when installed * Aluminum layer reflects heat from exhaust * Insulating material keeps heat away * Complete head pipe kits
Not Yet Reviewed
$59.99
—
$74.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
