Availability
Showing In Stock Items. Show All 31 Items.
On Sale
DEI Heat Shroud sleeving solves the problem of heat and abrasions causing failure of lines, hoses, and wires without the need to disconnect them. Offered in two different materials, both provide high-temperature protection and the added convenience of a hook-and-loop closure design that eliminates the need of removing one end of connected wires, cables, or hoses to install. Heat Shroud with glass fiber fabric and aluminized outer facing has the versatility of fitting diameters from 0.5 in. to 2.5 in. diameter, is easy to trim to length, and reflects 90 percent of radiant heat. For more demanding applications there is DEI Heat Shroud GOLD featuring metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base (rated to 1,100 degrees F) material. It is able to reflect radiant heat up to 800 degrees F and will fit diameters from 0.5 in. to 1.25 in.
( 70 )
$31.99
—
$45.99
$28.79
—
$41.39
On Sale
Using Thermo-Tec Thermo-Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today's high-performance applications.
( 49 )
$16.16
—
$627.47
$14.54
—
$564.72
On Sale
Summit Racing™ Volcano exhaust wraps help your ride erupt with power! Made from crushed lava rock, our wraps help to maintain hotter exhaust gases, decrease density, and enable gases to exit faster for better scavenging and increased horsepower. We offer a selection of widths and lengths to wrap up any of your applications. Add a burst of power without blowing your budget with Volcano exhaust wraps from Summit Racing™
( 13 )
$28.99
—
$41.99
$18.99
—
$31.99
On Sale
Patriot side pipe heat shields are designed as direct replacements for the Patriot shielded side pipes. The chrome plated heat shields will give you the same level of protection in the event a heat shield has to be replaced.
( 24 )
$106.05
—
$137.90
$95.44
—
$124.11
On Sale
Thermo-Tec's new Express Sleeves use a combination of high-temperature insulation material and a highly reflective Mylar foil with a Velcro® closure. The sleeves are designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap it around the wire, and re-close the sleeves. Express Sleeves reflect over 90 percent of radiant heat and are fireproof and fire-resistant.
( 22 )
$30.29
—
$589.25
$27.26
—
$530.32
On Sale
Keep power-robbing heat where it belongs with one of our Summit Racing™ exhaust wrap kits! These exhaust wrap kits can offer several benefits, including reduced under-hood heat, enhanced exhaust system efficiency, and improved engine performance. By retaining heat within the exhaust system, the wrap increases exhaust gas velocity, potentially boosting horsepower and torque. Additionally, it can lower the air temperature intake and protect nearby components from excessive heat. Each kit comes with exhaust wrap and locking ties. Order the kit designed for your application.
Not Yet Reviewed
$96.97
$76.97
On Sale
Designed for severe-duty use, DEI ONYX Series starter heat shields offer the highest level of protection. They are constructed of two layers of material—a highly reflective outer layer combined with a high-heat inner layer, and are able to withstand direct heat up to 1,350 degrees F making them a wise choice for high-heat applications where engine heat soak is a problem. DEI ONYX Series starter heat shields feature a hook-and-loop Velcro® fastening system and can be trimmed to size for a perfect fit.
( 4 )
$75.99
$68.39
On Sale
DEI muffler shield kits provide additional heat protection for your mufflers. They're based on DEI's proven floor and tunnel II heat shield kits, and are designed to wrap around just about any size muffler. Made from 10 mil dimpled aluminum with a 1/8 in. needle glass insulator, the shield material can be easily trimmed to fit. Each kit includes DEI's tough stainless steel positive locking ties for a tight, secure installation. These muffler shields will greatly reduce radiant heat coming off your muffler, resulting in a cooler interior and protection from damaging heat.
( 5 )
$67.99
$61.19
On Sale
Hire a pro to protect your spark plug wires: MSD Pro-Heat Guards. These thermal sleeves are made of a thick, glass-woven core that resists temperatures up to 1,000 degrees F—with a silicone rubber coating that surrounds the core, providing protection against abrasion and heat. MSD Pro-Heat Guards have a 3/8 in. inner diameter to slide easily over most spark plug wires.
( 2 )
$199.95
$179.95
On Sale
Thermo-Tec ignition/plug wire heat sleeving offers custom-fit protection. These Thermo-Tec rolls of black and blue high-temperature sleeving feature e-glass/silica insulation good up to 1,000 degrees F and a silicone outer surface good for temperatures up of to 500 degrees F. The sleeving is highly flexible, expandable, and abrasion-resistant for maximum protection against spark loss. Simply cut it to fit your ignition wires, spark plug wires, or even fuel lines to prevent vapor lock. Beat the heat with the perfect fit of cool Thermo-Tec ignition/plug wire heat sleeving.
( 3 )
$71.74
$62.99
—
$64.57
On Sale
Thermo-Tec Cool-It plug wire dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life, and will not react with petroleum products. Their double-wall construction keeps the wire and boot cooler in a high-temperature engine. Their universal size fits most boots, they're easy to install, and most importantly, are non-flammable. Cool-It plug wire sleeves can be used in any temperature environment from street vehicles to motor homes. These unique spark plug and ignition wire protectors come in a variety of colors.
( 24 )
$38.42
—
$57.63
$34.58
—
$51.87
On Sale
Flowmaster muffler heat shields are designed to mount on the muffler for added protection by reducing the heat radiated from mufflers and by reducing interior noise. They attach easily with the stainless steel straps included.
( 23 )
$49.95
—
$61.79
$44.96
—
$55.61
On Sale
Thermo-Tec spark plug wire heat shield sleeves feature aluminized outer surfaces that reflect 90 percent of radiant heat, with formulated inside silica based fabrics that prevent conductive heat from penetrating. The ultimate protection for spark plug wires and boots. These sleeves block conductive heat and reflect 90 percent of radiant heat up to 2000 degrees F.
( 6 )
$20.29
—
$40.58
$18.26
—
$36.52
On Sale
Shield heat away from wires, lines, and cables with Mr. Gasket's Inferno Shield reflective tape. It withstands up to 1,000 degrees F of radiant heat, which it reflects away, and 500 degrees F direct heat. This tape is non-flammable, self-adhesive backed, and resists water, fungus, and petroleum products.
( 4 )
$49.95
$44.96
On Sale
Taylor Space Age boot protectors are 6 in. long, heat-treated fiberglass covers that withstand temperatures up to 1,200 degrees F. They slide over most plug boots and are available in several colors.
( 56 )
$12.15
—
$141.10
$10.94
—
$126.99
On Sale
Designed for severe-duty use, DEI Ultra Shield MA starter shields offer the highest level of protection available for your starter. They're constructed from two layers of material--a highly-reflective outer layer, combined with a high-heat inner layer. The shields are able to withstand direct heat of up to 1,350 degrees F, and are the perfect choice for extreme high-heat applications where engine heat soak is a problem. The DEI Ultra Shield MA starter shields use a hook and loop fastening system and can be trimmed to size, if necessary.
( 4 )
$84.99
$76.49
On Sale
Thermo-Tec silicone-coated fiberglass fire sleeves are designed to protect wires, cables, and hoses from high-temperature exposure, liquid spills, and occasional exposure to flame. The high-quality sleeving is made from braided fiberglass and coated with a compound silicone rubber. These heat sleeves are capable of continuous protection to 500 degrees F and short-term exposure up to 2,200 degrees F.
( 16 )
$28.61
—
$549.85
$25.75
—
$494.86
On Sale
DEI Protect-A-Boot and Wire kits provide you with everything that you need to protect your ignition wire sets. The kits contain all of the benefits of Protect-A-Wire, packaged with color-matched Protect-A-Boots. They are available in four vivid colors for both 2- and 8-cylinder kits. The 2-cylinder kits include 7 ft. of Protect-A-Wire sleeving, six Hi-Temp shrink tubes, and two Protect-A-Boots. The 8-cylinder kits include 25 ft. of Protect-A-Wire sleeving, 25 Hi-Temp shrink tubes, and eight Protect-A-Boots.
( 2 )
$87.99
—
$95.99
$79.19
—
$86.39
On Sale
ACCEL Pro Sleeve boot guards will protect your spark plug boots from extreme heat. They feature double-layered fiberglass construction to absorb heat and abrasion. These guards use an adjustable boot ring, allowing them to be rotated and expanded over irregular surfaces for an easy installation. ACCEL Pro Sleeve boot guards work great for use with headers and protect continuously at 500 degrees F.
( 7 )
$52.69
$47.42
On Sale
Taylor ThunderVolt S-50 wire sleeving extends your vehicle's spark plug wire life. The silicone impregnated fiberglass shielding insulate against header heat and temperatures up to 600 degrees F. Taylor ThunderVolt S-50 wire sleeving come in 25 ft. rolls so you can cut exactly the sizes you need for maximum protection.
Not Yet Reviewed
$102.90
$92.61
On Sale
Hooker fuel/brake line heat shields are specifically designed to shield your factory fuel and brake lines. They attach to the inside of the driver side subframe rail from heat radiating off of your headers and exhaust. They feature stainless steel construction for corrosion resistance that will bring you long-lasting durability. Hooker fuel/brake line heat shields include all necessary hardware to make the installation quick and painless.
( 1 )
$89.19
$80.27
On Sale
Thermo-Tec Thermo-Flex aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides for abrasion resistance, thermal insulation, and the physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which creates sleeves that are flexible, lightweight, and strong. Install these sleeves on wires or hoses by slitting the material, rather than disconnecting the wire or hose ends. Thermo-Flex sleeves can withstand extreme temperatures of 750 degrees. Several sizes are available.
( 21 )
$16.48
—
$147.32
$14.83
—
$132.59
On Sale
These Taylor thermal protective sleeving rolls can be used to protect wires, fuel lines, brake lines, and more, while enhancing their appearance. They feature a special weave that easily expands to allow for an easy installation over fittings, and yet returns to its original size. Their outside coating can withstand 1,200 degrees F of continuous temperature.
( 7 )
$33.60
$30.24
On Sale
Taylor fire sleeve boot protectors are 6 in. long silicone covered braided fiberglass sleeves that offer continuous protection up to 500 degrees F. They slide over most plug boots and are great for motor homes.
( 2 )
$67.35
$54.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
