Availability
Showing In Stock Items. Show All 27 Items.
It's true--cooler plug boots will actually help your engine perform better by reducing the risk of arc-over from burned boots. Our Summit Racing™ plug boot protectors are designed to keep those boots (and wires, too) cool and happy. They're guaranteed up to 1,200 degrees F!
( 264 )
$6.99
—
$9.99
To help protect wires from extreme heat sources, look to Davis Unified Ignition for spark plug boot protectors. These boot socks fit around the plug boots and reflect heat away from them—up to 1200 degrees of protection! The spark plug boots feature a double wall thickness to offer up excellent protection, yet they are flexible and easy to install. These sleeve protectors will work with all boot angles, including 90 degree, 135 degree, and 180 degree. They are available in a variety of different color choices.
( 6 )
$8.50
Increase the efficiency of your ignition system with ACDelco spark plug heat shields. They offer maximum protection from conductive and radiant heat, providing strain relief and vibration resistance. The boot protectors are GM-recommended OE replacement parts, compatible with a wide range of makes and models. These steel snap-on accessories prevent lasting damage to your spark plug wires.
( 6 )
$4.99
Techflex Insultherm Tru-Fit sleeving is a braided fiberglass (FGL) sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200 degrees F may be encountered. Tru-Fit is used as primary insulation on low-voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible. Techflex Insultherm Tru-Fit sleeving provides a sturdy, long-lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.
( 6 )
$8.99
—
$13.99
A bunch of wires hanging individually along the frame or engine compartment can make a great project look tacky. Vibrant Performance flexible split sleeves can hold wires, cables, and hoses tightly without the need to buy a case of electrical tape. With regular wire looms, one normally uses zip ties to hold everything tight, and then electric tape to close off the slit in the looms. Good luck adding additional wires later on. Vibrant sleeves feature self-wrapping split braids that allow for the addition or removal of its contents without complete disassembly. They feature a 25 percent edge overlap and allow for tight radius bends without distortion or splitting open. Vibrant recommends cutting this sleeving with a hot knife to prevent fraying. When it comes to vehicles, our minds are constantly thinking about improvements. Vibrant Performance flexible split sleeves allow for easy upgrades.
( 2 )
$9.29
Cover your header tubes with Allstar Performance exhaust wrap. The woven fiberglass material is available in lengths, widths, and a choice of colors to do the job efficiently—most options rated to handle temperatures up to 1,200 degrees F. Being able to reduce under-the-hood temperatures while containing header tube heat for increased power is beneficial to any driver. Let Allstar Performance exhaust wrap help.
( 14 )
$9.99
—
$10.99
Summit Racing™ heat shields are ideally suited for heat protection in the space-limited firewall, under vehicle, exhaust path areas, or to wrap certain engine components. These self-adhesive shields measure only 0.24 inches thick and are able to handle up to 1,000 degrees F ambient temperature. They're available in natural aluminum or painted in a high-temperature black coating. Summit Racing™ heat shields can provide a remarkable decrease in protected surface temperatures--and may reduce noise, as well.
( 23 )
$10.99
Techflex Insultherm header wrap is extremely high-temperature resistant (up to 1,200 degrees F) and is commonly used to contain and manage hot gases in automotive and high performance headers and exhausts. Insultherm header wrap is manufactured from texturized fiberglass yarns that are woven into a strong and flexible wrap with vermiculite coating. Remember, when installing Insultherm exhaust wrap, overlapping 1/4 in. is perfect as this allows just enough heat out to ensure performance without damaging your exhaust.
( 17 )
$13.99
Silicone-jacketed fiberglass Techflex FireFlex sleeving is the choice of professionals in racing and other industries where protection from constant temperatures approaching 500 degrees F is mandatory. FireFlex sleeving is engineered to protect hoses, cables, and wire harnesses from damage due to exposure to extreme heat, open flame, molten splash, and welding sparks. The thick, high-temperature fiberglass sleeve is jacketed with a non-permeable, heavy silicone coating that is flexible enough to follow tight radius curves. FireFlex resists all automotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection. Techflex FireFlex sleeving is completely non-conductive, will not melt, delaminate, become brittle, or support combustion under normal conditions. It provides a professional level solution to thermal protection needs in any application.
( 3 )
$10.99
—
$13.99
By wrapping your headers with Thermo-Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent, and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2,000 degrees F, and installs easily with standard hose clamps or the optional stainless steel Snap Straps.
( 114 )
$10.42
Wires, hoses, and cables can take some degree of heat, but when temperatures start going up, they'll need Vibrant Performance ExtremeShield 1200 flexible tubing. This easy, slip-on tubing features an aluminized heat shield laminated to tightly braided fiberglass and provides protection up to 1,200 degrees F. Keep your wires, cables, and hoses out of heat's destructive path with Vibrant Performance ExtremeShield 1200 flexible tubing.
( 5 )
$9.29
Permatex muffler and tailpipe bandages quickly repair damaged exhaust systems, getting you back on the road. The epoxy-impregnated fiberglass bandage chemically welds mufflers and tailpipes to permanently repair holes and leaks in exhaust systems, saving costly part replacement. The bandage seals in dangerous fumes that would otherwise leak into the car, causing health concerns. Turn to Permatex muffler and tailpipe bandages to fix that leak.
Not Yet Reviewed
$7.99
Redhorse Performance offers a comprehensive line of automotive plumbing accessories—including 244 Series fire sleeves. Featuring a woven high-temperature fiberglass lining covered by a thick, 100 percent silicone jacket, which provides superior heat protection for fuel, oil, brake, or electrical lines, these fire sleeves are designed for use with AN type of hose. They are available in a wide range of diameters and lengths, and each fire sleeve is rated to withstand continuous working temperatures up to 500 degrees F, and intermittent heat up to 3000 degrees F. Choose the model you need.
( 2 )
$5.20
—
$10.96
Russell Wrap-It is a self-wrapping, lightweight oversleeve that is used as an outer protection for wires, harnesses, and hoses. Wrap-It is designed for quick and easy installation and removal, for assembly and maintenance without the need for tools. Manufactured from woven polyester and rated up to 250 degrees, it is sure to give excellent protection. Wrap-It comes available in different sizes to fit most applications.
( 23 )
$9.95
—
$11.95
DEI Protect-A-Wires are ignition wire sleeving that guards against extreme underhood temperatures. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps; upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install over spark plug wires, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple inside dimensions are available, depending on the material; choose the vivid colors needed to keep your engine bay organized. * Basic sleeves protect up to 500 degrees F of direct, continuous heat * Basic sleeves protect up to 1200 degrees F of radiant heat * 2 cylinder vehicle kits include 7 ft. of sleeving * 8 cylinder vehicle kits include 25 ft. of sleeving * Silicone kits protect up to 400 degrees F * Titanium kits protect up to 1800 degrees F direct /2500 degrees F radiant
( 5 )
$3.99
—
$10.99
Thermo-Tec oil filter heat shields serve as a robust protective barrier for your oil filter, shielding it from the extreme heat from the engine. Available in two sizes, their design seamlessly encompasses the oil filter, offering a comprehensive defense against intense heat. Crafted with a reflective surface, they effectively deflect radiant heat, thus maintaining optimal operating temperatures within the oil filter housing. Thermo-Tec shields ensure the longevity and efficiency of your oil filter, safeguarding its performance even under demanding conditions. Select the proper size shield to fit your filter.
Not Yet Reviewed
$7.94
—
$9.98
Summit Racing™ stainless steel locking ties are must-haves when installing exhaust wrap. These rust-resistant ties are fireproof, with a melting temperature of a whopping 2,500 degrees! Summit Racing™ stainless steel locking ties are durable and dependable and are perfect for securing your exhaust wrap.
( 132 )
$8.99
United Pacific stainless locking cable ties withstand temperatures up to 2,500 degrees F. Their quick and easy ball-bearing locking mechanism holds tight, making them perfect for securing exhaust wrap on headers and pipes. United Pacific stainless locking cable ties are also an excellent upgrade for electrical wire and cable tie applications.
( 1 )
$7.99
When restoring or repairing your Corvette, even the small items are important. CA ignition/heat shield bracket bolts will provide the correct fit and they are engineered to meet or exceed OEM specifications. Instead of searching for the proper size bolts, order CA bracket bolts and be assured they will be right.
Not Yet Reviewed
$8.99
Protect your hoses, cables, and wiring with Earl's Performance Flame Guard insulation. The sleeve-like lengths are non-asbestos, and will safeguard your lines in operating temperatures from -65 degrees to +500 degrees F, with splashes as hot as 2000 degrees F. Flame Guard is available in a red brick color, or in plain black with no logo (a more professional look for your race or show car). These tubing sleeves are offered in a six common diameters, in bulk or pre-cut lengths. Combat underhood heat with Flame Guard!
( 6 )
$9.78
Protect your wiring or fluid lines from extreme heat with these Fragola Performance Systems Ultralightweight fire sleeves. These sleeves are constructed from resin-coated fiberglass that is able to withstand heat up to 1,200 degrees. Fragola Performance Systems offers these Ultralightweight fire sleeves in a range of sizes to help you find the right one for the job.
Not Yet Reviewed
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
