Availability
Showing In Stock Items. Show All 20 Items.
DEI Turbo Insulation kits are designed to fit all turbos from the sport compact turbos to the large over the road trucks. Designed to reduce turbo lag and reduce under hood temperatures, these Turbo Insulation Kits add additional horsepower while protecting costly components from unwanted heat. The kits come complete with all the materials necessary for a clean, professional looking installation.
Not Yet Reviewed
$87.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$105.47
On Sale
Precision laser-cut stainless steel ensures that COBB Tuning Subaru turbo heatshields can withstand years of abuse. They significantly diminish the venting of heat from exhaust gas temperature into the engine bay … reducing heat soak into key components that benefit from cooler ambient temperature, such as the intercooler. COBB Tuning stainless steel heat shields are designed in-house and are replacements for the factory turbo heatshields found on many turbocharged Subarus. Additional features of COBB Tuning Subaru turbo heatshields: * Works with stock or aftermarket downpipes * A modification that goes hand-in-hand with an aftermarket downpipe * The COBB logo is laser-etched and can be clearly seen--no matter how much heat is being deflected * A great addition to show cars and race cars alike NOTE: Designed for stock turbo applications only.
( 1 )
$99.00
$89.10
Universal HP Turbo Heatshield kits can help increase horsepower and reduce turbo lag while protecting other engine components from turbo-generated under-hood heat. Unlike sets that use exhaust wrap, the Heatshield Products kits feature extreme-temperature insulation materials, which provide greater heat protection, performance, and durability. Capable of withstanding 1,800 degrees F continuous, the shields feature a design for street performance and the most hardcore racing applications. The simple two-piece design of Heatshield Products HP Turbo heat shields includes comprehensive instructions, so installation is simple for novice and experienced installers alike.
Not Yet Reviewed
$87.99
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$95.95
Reduce turbo lag while protecting other engine components and help to reduce underhood temperatures with Lava turbo heat shields from Heatshield Products. These custom-fit components use extreme-temperature materials to keep the heat on the hot side of the turbo where it belongs. Installation is a breeze since you don't have to trim or fit the heat shield blanket to fit your turbo housings. Heatshield Products Lava turbo heat shields' silica contact layer and silica insulation make the turbo shields capable of withstanding 1,800 degrees F continuously.
( 9 )
$87.99
Heatshield Products Stealth turbo heat shields can increase boost, reduce turbo chatter or flutter, and help keep your turbo from lagging. By retaining heat inside the shields, your turbo not only becomes more efficient but your underhood temperatures also get reduced, lowering the intake temperatures, and adding power. Heatshield's low-profile black Stealth shields withstand up to 1,800 degrees F (continuous), and their custom design means that no trimming is needed, making installation a snap. Whether you're hardcore racing or in a street machine, heat kills performance—battle back against it with the Stealth turbo heat shields from Heatshield Products best suited for your application!
( 3 )
$92.99
On Sale
XDR inlet pipe heat shields are a great way to add a custom look, as well as an extra level of protection for your powersports utility vehicle. They're cut from 10-gauge 304 stainless steel and given a brushed finish for durability and good looks. XDR turbo heat shields are direct-fit components that easily bolt on.
Not Yet Reviewed
$94.95
$52.22
DEI Form-A-Shield heat barriers solve the problem of needing a direct-contact, extreme heat barrier. Capable of withstanding direct heat of up to 1,400 degrees F, these sheets can cover exhaust headers, manifolds, turbo housings, and downpipes, dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled-aluminum that's bonded to a high-temp rated basalt thermal barrier material, Form-A-Shield may be applied directly to hot surfaces, helping to lower underhood temperatures while keeping more heat in the exhaust system. Order the Form-A-Shield heat barriers in the size and thickness needed for your application. Key features and benefits: * Extremely pliable and forms to many shapes and configurations * Durable and resistant to oil and chemical spills * Superior insulator anywhere near the path of exhaust pipes * Can be applied directly to hot surfaces * Fasten with straps, screws, clamps, or DEI locking ties (not included) * Direct heat resistance: 1,400 degrees F Note: DEI adhesive spray can be used with Form-A-Shield on "non-hot" areas only, to serve as a heat barrier/reflector.
( 5 )
$87.99
Heatshield Products Lava master cylinder heat shields help prevent unsafe braking conditions. Jamming major power into a tight space can create some serious trouble with a header or a turbo close to the master cylinder, or exhaust components generating heat upward right into one of the most critical safety components to your vehicle. Boiling brake fluid and being unable to brake is serious. Lava heat shields withstand continuous 1,200 degrees F and are chemical-, oil-, and acid-resistant making them the perfect master cylinder shield for harsh conditions, like high-heat and near brake fluid. Stay safe and potentially improve braking performance with Heatshield Lava shields.
( 6 )
$109.99
Introducing Funk Motorsports Lava Rock Titanium exhaust wrap—a core part of their heat management line up! As the name suggests, this Lava Rock Titanium exhaust wrap is a ceramic wrap compiled with a blend of basalt and lava rock for unrivalled performance and durability. An exhaust wrap application creates a thermal sleeve around the individual branches of the exhaust, keeping pipework insulated and maintaining a higher core gas temperature. As we know, a hotter gas actually helps to accelerate out of the downpipe and exhaust system faster, improving efficiency and in turbo applications, exhaust wrap can improve spool time too! Available in both 50mm and 25mm 'skinny' width, all of Funk Motorsports exhaust wrap rolls are 15mm in length and include six metal locking ties for your application. For installation assistance, check out their company website! Features, performance, and key benefits of Lava Rock exhaust wrap: * Made from Basalt Lava Rock—which is more durable than fiberglass wraps * Withstands 980 degrees C direct heat and up to 1,350 degrees C intermittent heat * Protects sensitive components by insulating the heat from the exhaust—components such as sensors, ECUs and wiring looms can all be extremely sensitive to heat * Titanium Exhaust heat wrap helps to dramatically lower engine temperatures within the engine bay—simply wrap the pipework to insulate the heat within the exhaust to reduce the overall temperature of your engine bay and improve the reliability of all engine bay components * Includes 6 metal locking ties
Not Yet Reviewed
$50.63
—
$84.38
Prevent vapor lock and shift cables from melting with Lava hot rod sleeves from Heatshield Products. The heat shields for fuel lines combine the best of two worlds, the flexibility of a rugged hot rod sleeve with the strength of lava rock fiber. Lava fiber is naturally acid, chemical, brake fluid, and chemical-resistant. Additionally, the fiber is 25 percent stronger than fiberglass and is abrasion-resistant. The special braid of these tube heat shield sleeves allows them to have an expandable inside diameter up to 15 percent. To expand the inside diameter, shorten the length or bunch up the Lava hot rod sleeve to allow it to slide on over fittings and terminals. Once over, expand or stretch the length to tighten the sleeve onto the line or hose. To cut, use a sharp knife or pair of scissors. Each kit includes four heat shrinks to seal the ends of the oil line heat shield sleeve to the cable, tube, or hose it is protecting. Remember a loose-fitting heat shield sleeve is okay if the ends are sealed to prevent heat from getting trapped between the sleeve and the component it is protecting. The 10 ft. long sleeves are available in diameters ranging from 1/4 in. to 1.5 in. Additional details: * Heat shield loom and Hot Rod Sleeves shield harnesses and fuel lines even in harsh environments. They can reduce radiant heat damage and prevent vital fluids such as fuel from overheating. * Rated for 1,100 degrees F * Maximum ambient temperature: 2,000 degrees F * Lava fiber resists chemicals, oil, fuels, and even acid * Heat shield protection for: -- Fuel lines -- Brake lines -- Transmission lines -- Oil lines -- Turbo lines -- Harnesses
Not Yet Reviewed
$74.99
—
$85.99
Keeping your wiring safe is critical to ensure your engine and or electrical system continues to function as desired. Holley EFI flame retardant split-wire looms are engineered specifically to protect your investment from these high temperature conditions, be it from header tubes, turbo manifolds, or other potential sources of heat. The Nomex split looms feature an operating temperature range from -76 degrees F to +392 degrees F, and are self-wrapping, which makes them quick and easy to install. The woven Nomex loom cuts easily with a pair of quality scissors, no special tools required.
Not Yet Reviewed
$74.99
—
$91.35
Instant Rebate
ZyCoat ZyBar thermal coating is a high temperature thermal dissipation coating for headers, manifolds, turbos, and exhaust systems. By greatly reducing radiant engine heat, ZyBar improves scavenging performance to boost torque and increase horsepower. Utilizing advanced, micro-surface technology, even a very thin .001 to .0012 mil coating of ZyBar outperforms conventional tapes, wraps, ceramic, or powder coatings. ZyBar's improved engine performance was confirmed by measuring header surface temperature reduction versus stock, uncoated headers. Utilizing revolutionary, lightweight micro-surface technology, ZyBar significantly reduces surface temperatures which, in turn, lowers under-the-hood temperatures, and lessens the need for heavy wraps, tapes and shields. Additional features of ZyCoat ZyBar thermal coating include: * Lower applied cost … less than 1/3 the cost of ceramic coating * Increased scavenging performance for increased engine performance * Color stability and corrosion resistance * Conquers temperature extremes up to 2000+ degrees F * Reduces radiant heat by over 90 percent * Accelerates thermal flow to increase horsepower * Resists rust and corrosion--won't chip or crack * Spray, dip, or wipe application * Choice of colors
( 15 )
$71.99
Protect your spark plug boots and HT leads against heat, chemicals, and water with Funk Motorsports' spark plug boot protectors and HT lead protectors. Reduce the chance of a misfire caused by hot manifolds or engine components damaging your leads. These spark plug boots are designed specifically for heat protection to ensure maximum spark energy and to maintain maximum power output. They install in seconds and come in an array of colors to suit all race and road applications. Sold as a pair or in multi-pack sets of same color. Order the quality needed. Product features: * Spark plug boot protector covers provide added protection to ignition and other sensitive components * Easy and quick installation, simply slide over and fit—each cover provides a strong locking system that can be adjusted to suit your individual component * Withstands continuous temperature of 650 degrees C with flashes of 1,100 degrees C * Available in an assortment of color options, including Lava Rock Titanium to match Funk Motorsports exhaust wraps, turbo blankets and protective sleeving * Available in packs of 2, 4, 6, 8, and 10 (please specify when ordering)
Not Yet Reviewed
$50.63
—
$92.81
Funk Motorsports silver heat sleeving allows both protection of vital lines and signal cables, while at the same time keeping your engine bay or cabin tidy. Silver heat sleeving uses malleable high-temperature silica with a heat-reflective material laminate, and is designed to easily slip over cables and lines in situe, without the need for any line or cable disconnecting. Funk Motorsports extremely popular silver heat sleeving is now offered in Velcro® form and is available in a variety of diameters and lengths. With silver heat sleeving by Funk Motorsports, you can protect your vehicles sensitive lines running close to turbos, manifolds, and more! Order the silver heat sleeving in the diameter and length needed. Benefits and features: * Easy fit, Velcro® heat sleeve * Reflects away radiant heat—withstands direct heat of up to 250 degrees C * Available in a variety of diameters and lengths, silver Velcro® heat sleeving can be easily cut to size for any application * Protection sleeve is also suitable for 4 AN, 6 AN, 8 AN, 10 AN, 12 AN, and 16 AN hosing * Provides protects for important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat. Protect fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$59.77
—
$71.72
Keep your induction air cool with Thermo-Tec Cool Tube heat shields. The unique lace up tube cover design allows these heat shields to fit from 2.50 in. to 4 in. air tubes up to 36 inches long. The lace on heat shield blocks over 98 percent of the radiant heat of the turbo and exhaust. Each kit comes complete with four different color laces, blue, yellow, red and white.
( 4 )
$62.46
Funk Motorsports gold heat sleeving is designed to work in temperatures of up to 450 degrees C, and it is easy to use, simply slide and secure over sensitive lines and feeds for extreme heat protection. Available in a variety of diameters and lengths, gold heat sleeving can be easily cut to size for any application. Protect your vehicles sensitive lines running close to turbos, manifolds, and more with gold reflective heat sleeving by Funk Motorsports. Order the heat sleeving designed for your application. Product Overview: * Gold heat sleeving is designed to simply slide over wiring/pipework * Available in a variety of diameters and lengths * Gold heat sleeving can be easily cut to size for any application * Withstands constant temperatures up to 450 degrees C * Protects important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat * Protects fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$54.84
—
$98.44
Tired of feeling the burn from your off-road machine? DEI Powersports heat control kits shield the heat and increase the riding comfort for you and your whole crew. The kits include precision-cut, adhesive-backed pieces that reduce console and seat temperatures, block radiant heat in the cup holder(s), and reduce engine noise and vibrations. Installation is straight forward, and no modifications are needed for installation. Choose the kit(s) designed for your ATV, UTV, or Side x Side.
( 2 )
$98.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
