Availability
Showing In Stock Items. Show All 8 Items.
Thermo-Tec turbo insulating kits were designed to protect, improve performance, and eliminate turbo lag on turbochargers. These complete kits will contain the heat produced by a turbo and fit a wide variety of turbines. These custom cut-to-fit kits come with an excessive amount of material to cover many turbos, from the smallest automotive to heavy-duty truck applications.
( 4 )
$46.23
On Sale
XDR inlet pipe heat shields are a great way to add a custom look, as well as an extra level of protection for your powersports utility vehicle. They're cut from 10-gauge 304 stainless steel and given a brushed finish for durability and good looks. XDR turbo heat shields are direct-fit components that easily bolt on.
Not Yet Reviewed
$94.95
$52.22
Prevent vapor lock and shift cables from melting with Lava hot rod sleeves from Heatshield Products. The heat shields for fuel lines combine the best of two worlds, the flexibility of a rugged hot rod sleeve with the strength of lava rock fiber. Lava fiber is naturally acid, chemical, brake fluid, and chemical-resistant. Additionally, the fiber is 25 percent stronger than fiberglass and is abrasion-resistant. The special braid of these tube heat shield sleeves allows them to have an expandable inside diameter up to 15 percent. To expand the inside diameter, shorten the length or bunch up the Lava hot rod sleeve to allow it to slide on over fittings and terminals. Once over, expand or stretch the length to tighten the sleeve onto the line or hose. To cut, use a sharp knife or pair of scissors. Each kit includes four heat shrinks to seal the ends of the oil line heat shield sleeve to the cable, tube, or hose it is protecting. Remember a loose-fitting heat shield sleeve is okay if the ends are sealed to prevent heat from getting trapped between the sleeve and the component it is protecting. The 10 ft. long sleeves are available in diameters ranging from 1/4 in. to 1.5 in. Additional details: * Heat shield loom and Hot Rod Sleeves shield harnesses and fuel lines even in harsh environments. They can reduce radiant heat damage and prevent vital fluids such as fuel from overheating. * Rated for 1,100 degrees F * Maximum ambient temperature: 2,000 degrees F * Lava fiber resists chemicals, oil, fuels, and even acid * Heat shield protection for: -- Fuel lines -- Brake lines -- Transmission lines -- Oil lines -- Turbo lines -- Harnesses
Not Yet Reviewed
$29.99
—
$49.99
Funk Motorsports silver heat sleeving allows both protection of vital lines and signal cables, while at the same time keeping your engine bay or cabin tidy. Silver heat sleeving uses malleable high-temperature silica with a heat-reflective material laminate, and is designed to easily slip over cables and lines in situe, without the need for any line or cable disconnecting. Funk Motorsports extremely popular silver heat sleeving is now offered in Velcro® form and is available in a variety of diameters and lengths. With silver heat sleeving by Funk Motorsports, you can protect your vehicles sensitive lines running close to turbos, manifolds, and more! Order the silver heat sleeving in the diameter and length needed. Benefits and features: * Easy fit, Velcro® heat sleeve * Reflects away radiant heat—withstands direct heat of up to 250 degrees C * Available in a variety of diameters and lengths, silver Velcro® heat sleeving can be easily cut to size for any application * Protection sleeve is also suitable for 4 AN, 6 AN, 8 AN, 10 AN, 12 AN, and 16 AN hosing * Provides protects for important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat. Protect fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$30.94
—
$35.86
Introducing Funk Motorsports Lava Rock Titanium exhaust wrap—a core part of their heat management line up! As the name suggests, this Lava Rock Titanium exhaust wrap is a ceramic wrap compiled with a blend of basalt and lava rock for unrivalled performance and durability. An exhaust wrap application creates a thermal sleeve around the individual branches of the exhaust, keeping pipework insulated and maintaining a higher core gas temperature. As we know, a hotter gas actually helps to accelerate out of the downpipe and exhaust system faster, improving efficiency and in turbo applications, exhaust wrap can improve spool time too! Available in both 50mm and 25mm 'skinny' width, all of Funk Motorsports exhaust wrap rolls are 15mm in length and include six metal locking ties for your application. For installation assistance, check out their company website! Features, performance, and key benefits of Lava Rock exhaust wrap: * Made from Basalt Lava Rock—which is more durable than fiberglass wraps * Withstands 980 degrees C direct heat and up to 1,350 degrees C intermittent heat * Protects sensitive components by insulating the heat from the exhaust—components such as sensors, ECUs and wiring looms can all be extremely sensitive to heat * Titanium Exhaust heat wrap helps to dramatically lower engine temperatures within the engine bay—simply wrap the pipework to insulate the heat within the exhaust to reduce the overall temperature of your engine bay and improve the reliability of all engine bay components * Includes 6 metal locking ties
Not Yet Reviewed
$50.63
Protect your spark plug boots and HT leads against heat, chemicals, and water with Funk Motorsports' spark plug boot protectors and HT lead protectors. Reduce the chance of a misfire caused by hot manifolds or engine components damaging your leads. These spark plug boots are designed specifically for heat protection to ensure maximum spark energy and to maintain maximum power output. They install in seconds and come in an array of colors to suit all race and road applications. Sold as a pair or in multi-pack sets of same color. Order the quality needed. Product features: * Spark plug boot protector covers provide added protection to ignition and other sensitive components * Easy and quick installation, simply slide over and fit—each cover provides a strong locking system that can be adjusted to suit your individual component * Withstands continuous temperature of 650 degrees C with flashes of 1,100 degrees C * Available in an assortment of color options, including Lava Rock Titanium to match Funk Motorsports exhaust wraps, turbo blankets and protective sleeving * Available in packs of 2, 4, 6, 8, and 10 (please specify when ordering)
Not Yet Reviewed
$28.69
—
$50.63
AP Exhaust heat shields offer renewed protection, along with the right fit. They are manufactured from aluminized steel. Your exhaust system creates a lot of heat. Control the high temperatures and guard your floorboards with AP Exhaust heat shields.
Not Yet Reviewed
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
