Exhaust Headers, Bolts, Collectors & More

Proform Self-Locking Wedge Header Bolts

Proform self-locking wedge header bolts get a grip on your headers that won't let go—until you're ready! These permanently assembled bolt sets feature special washers with super-hardened serrated teeth that, when torqued to 28 lbs.-ft., bite into and grab the bottom of the bolt head and the top surface of the header. Any bolt-loosening rotation is blocked by the wedge-locking action created by the washers' interfacing cams; but what's really impressive is that engine vibration—the enemy—increases the tension, making them even more secure! The bolts are re-useable and you can count on them to not fail. Proform self-locking wedge header bolts put an end to the constant tightening for a leak-free, headache-free future. They're available in different finishes and sizes for applications from 1965 and up.

4.61 out of 5 stars ( 66 )

$34.95

—

$37.95

Patriot Formed Collectors

Bring together your headers pipes with Patriot formed collectors. These collectors are made from mild steel and provide a single passage for superior exhaust scavenging. They come available in 2-into-1 and 4-into-1 weld-on styles in a variety of primary tube and collector sizes to fit your application. Assemble your pipes with Patriot formed collectors.

4.56 out of 5 stars ( 18 )

$32.91

—

$164.67

Stainless Works Formed Collectors

Two-way, three-way, or four-way--Stainless Works formed collectors are available "your-way" to match your project. They are made from 304 stainless steel and tapered for smooth flow. They offer several choices of inlet and outlet sizing to get just what you need. Formed for you--collectors by Stainless Works.

4.67 out of 5 stars ( 6 )

$46.55

—

$109.25

Summit Racing™ Headers

Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)

4.23 out of 5 stars ( 2052 )

$179.99

—

$499.99

Doug's Headers Stainless Steel Headers

Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included

4.21 out of 5 stars ( 34 )

$726.93

—

$1,809.13

On Sale

aFe Twisted Steel Headers

aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.

4.19 out of 5 stars ( 21 )

$581.00

—

$2,689.00

$522.90

—

$2,420.10

Flowtech Afterburner Headers

Flowtech Afterburner headers have a patented velocity tube design, which will increase scavenging and smooth exhaust pulses. They also feature a primary collector formed from steel, and a large 3 in. secondary collector. They're available in standard painted or ceramic coated finishes. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.0 out of 5 stars ( 7 )

$419.95

—

$433.95

Patriot Sprint Style Weld-Up Kits

Patriot's Sprint-style header kits work for outside frame street rod applications, Sprint Cars, and front strut-type drag cars. These Sprint-style kits come with 8 mandrel-bent one-piece primaries, 2 flanges, and formed collectors. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.0 out of 5 stars ( 4 )

$305.79

—

$351.38

Banks Power TorqueTube Exhaust Headers

Virtually indestructible, Banks Power TorqueTube exhaust headers maximize exhaust extraction, unleashing gobs of torque. Manufactured from 100 percent heavy-wall stainless steel, they are mandrel-formed to tune the exhaust flow for maximum torque in your truck or motorhome. And unlike restrictive stock setups, Banks TorqueTubes literally pull out the exhaust, slashing backpressure and unleashing greater torque, helping the intake stroke to draw in more air. Squeeze more performance out of your engine; choose a pair of Banks TorqueTube exhaust headers designed for your vehicle. Each set may include additional components. Features: * Maximize exhaust extraction * Flanges welded on both sides, then milled flat * Seamless high-velocity collector * Ultra-thick flanges won't warp/flex * No sealant/gaskets needed Please note: Unless otherwise stated, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.82 out of 5 stars ( 11 )

$569.00

—

$1,699.00

Kooks Headers Collectors

Install a set of Kooks Headers collectors for your best performance and price. These slip-on collectors are available in steel and stainless steel and are formed for flow. For collective power, Kooks collectors will pull your primary tubes together .

Not Yet Reviewed

$141.08

—

$240.50

Stainless Works Header Builder Kits

Stainless Works offers a wide range of header builder kits for your customization projects. The 304 stainless steel header builder kits include two 3/8 in. thick laser-cut flanges (to be specified by customer), 12 J-bends (one 6 in. long leg and one 12 in. long leg), two formed collectors, and two filler diamonds to connect the tubes together. Specify desired flange style; and choose your primary tube and collector diameters. All tubes are mandrel-bent for optimal flow in the J-bends. Order the header builder kit with options desired for your exhaust system.

Not Yet Reviewed

$926.25

KRC Racing Allen Lock Stud Header System Kits

Headers that form a leak can lose at least 15 hp per header side. And that's bad news when it comes to the performance factor. KRC Racing Allen lock stud header system kits include high-tensile studs, heat-treated nuts, and precision-locking washers to ensure that your headers are installed tightly and will not leak. Their special 12-point double hex socket has 12 driving points for easier hex key engagement. With their special vibration-free nut, you're able to tighten your header in more positions than you could with an open-end wrench.

Not Yet Reviewed

$105.99

—

$122.99

Hooker Header Flanges

Your friends at Hooker have taken the most difficult and time-consuming part of building custom headers and done it for you! These pre-formed flanges feature durable 3/8 in. steel construction and will provide an exact fit to the exhaust ports on your cylinder heads.

3.67 out of 5 stars ( 3 )

$372.95

On Sale

Moroso Header Flanges

Moroso has taken the most difficult and time-consuming part of building custom headers and done it for you! These pre-formed flanges feature 3/8 in. aluminum construction and will provide an exact fit to the exhaust ports on your custom cylinder heads.

Not Yet Reviewed

$167.99

$151.19

Patriot Tight Tuck Headers

Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.29 out of 5 stars ( 55 )

$349.16

—

$538.04

Trick Flow® Header Build Kits

Trick Flow® header build kits contain high-quality 304 stainless steel components with a natural finish for long-lasting good looks and unbeatable performance. These kits are not prefabricated weld-up parts like many others on the market; they're for automotive enthusiasts who want to build their own stainless steel headers. Only the header flanges and collectors are prefab, leaving the creativity in the hands of the builder. Each kit includes laser-cut flanges, J-bends, collectors, and filler diamonds to connect the tubes together. The construction possibilities are endless with a Trick Flow® header build kit.

3.5 out of 5 stars ( 2 )

$1,014.99