Availability
American Racing Headers C7 Corvette headers are available with options that allow you to fine-tune your exhaust system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit, and ease of installation. Options include a variety of primary sizes and your choice of X-pipe midsection diameters, ARH's exclusive X-pipe forward location (on select models), and severe-duty cats. Long systems end at the rear axle and are a direct fit to stock or aftermarket axle-back exhausts. ARH also offers mid-length header systems; a more emissions friendly option for C7s. Their mid-length kits allow you to reuse the secondary set of factory cats combined with ARH's severe-duty catalytic converters. These systems improve performance yet significantly reduce the possibility of a check engine light. All ARH C7 kits are direct bolt ons; expect a quick and easy install with the included Grade 8 hardware, race-quality gaskets, and stainless steel band clamps (where applicable). They will surpass your expectations in quality and performance. Additional features of American Racing Headers C7 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you'll ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$2,054.49
—
$2,974.40
On Sale
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$605.80
—
$1,387.25
$545.22
—
$1,248.52
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 87 )
$827.95
$200.95
—
$1,049.95
Ultra-high quality American Racing Headers 3rd Generation Camaro/Firebird headers fit and perform great and will last indefinitely. These Gen 3 F-body headers are available for a variety of engines and are offered in a choice of primary tube sizes. Each primary tube, regardless of diameter, is designed to minimize restriction; efficient high-flow, state-of-the-art merge collectors are carefully tuned to deliver exceptional horsepower and torque. Additional features of ARH 3rd Generation Camaro/Firebird headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The last set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 3 )
$1,255.80
—
$1,315.89
Headers can represent a sizable investment, so you'll want to keep them securely attached. In addition, exhaust leaks can cost you power and even cause damage to your vehicle. ARP stainless steel header studs are the answer. They're made from premium 300 stainless steel, which is rated at 170,000 psi tensile strength--much stronger than Grade 8 steel. These studs are also highly corrosion and heat-resistant, for long service under the toughest conditions, and they're polished to a mirror-like shine. Each kit includes the specific number of parts for the desired application, plus premium-quality washers and either hex or 12-point nuts.
( 65 )
$74.99
—
$172.99
On Sale
Flowtech LS turbo headers improve smooth-flow engine breathing and increase cylinder scavenging effect by providing consistent tubing diameters. Constructed of heavy-duty, 16-gauge stainless steel, they're available in natural, black painted, and ceramic coated finishes. These headers offer 1 3/4 and 1 7/8 in. tubing diameters for increased exhaust flow, increased performance, and improved throttle response. A 3 in. collector provides additional strength and durability.
( 27 )
$449.95
$239.95
—
$399.95
Virtually indestructible, Banks Power TorqueTube exhaust headers maximize exhaust extraction, unleashing gobs of torque. Manufactured from 100 percent heavy-wall stainless steel, they are mandrel-formed to tune the exhaust flow for maximum torque in your truck or motorhome. And unlike restrictive stock setups, Banks TorqueTubes literally pull out the exhaust, slashing backpressure and unleashing greater torque, helping the intake stroke to draw in more air. Squeeze more performance out of your engine; choose a pair of Banks TorqueTube exhaust headers designed for your vehicle. Each set may include additional components. Features: * Maximize exhaust extraction * Flanges welded on both sides, then milled flat * Seamless high-velocity collector * Ultra-thick flanges won't warp/flex * No sealant/gaskets needed Please note: Unless otherwise stated, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 11 )
$569.00
—
$1,869.00
On Sale
Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter
( 25 )
$335.95
$164.95
—
$337.95
Summit Racing™ split lock bolt kits put a new twist on the theory of mechanical locking fasteners. These innovative bolts use a locking set pin built into the bolt itself—and when tightened, the set pin expands the bolt threads against the thread wall. This, in turn, provides a locking system without having to use any additional wires, locking compounds, or lock washers. To remove the split lock bolts, simply loosen the set pin and back out the fastener. They are available in a variety of thread sizes, for engine applications from the 1950s and up.
( 35 )
$4.99
—
$44.99
The Kooks Headers Super Street Series headers are a huge improvement over the stock pipes, with large primaries, collectors, and 3/8 in. flanges for sealing superiority. These headers are meticulously made and fit precisely into the engine bay of your ride. In addition to perfect fit, the headers are constructed from 304 stainless steel, which provides rust resistance throughout the life of the product. Super Streets are designed to be a direct-fit replacement for the factory manifolds, bolt right up to the factory pipes, and will provide a proven horsepower increase and corresponding torque gain throughout the powerband. No cutting or welding is required for installation. These headers were designed with performance in mind and weigh significantly less than the factory manifolds. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,394.67
—
$2,498.43
On Sale
Patriot Roadster/Sprint Car headers are setting standards in style, quality, and performance for "Fad T" and '32 Hi-Boy headers. They offer T-buckets a choice between their classic or high performance Sprint-style headers for small and big block Chevy, as well as small block Ford engines. And if you want, you can match these headers with Patriot turnouts and integral mufflers for a complete exhaust system. Patriot Roadster/Sprint Car headers are available in a choice of finishes, including a show-quality chrome that is applied to headers that have been polished before and after assembly to assure ultimate chrome quality 360 degrees around all pipes. Additional finishes for Patriot Roadster/Sprint Car headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 16 )
$362.95
—
$933.65
$326.66
—
$840.28
On Sale
JBA mid-pipes are the perfect complement to your JBA headers or JBA exhaust system. These mid-pipes open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular applications as stand-alone upgrades or as additions to existing JBA products. Each set of pipes is application-specific and optimized for your vehicle to get a perfect fit every time. They feature smooth flowing mandrel-bent tubing, heavy-duty flanges, factory-style hangers, and provisions for factory emissions equipment for a simple installation.
( 3 )
$145.85
$131.26
Backed by 40-plus years of knowledge and experience, Thorley headers are designed to outflow your stock exhaust manifolds. These headers increase gas mileage and give your engine more horsepower across the entire rpm range. Their design configuration builds the most power across the rpm range, which is great for everything from street/strip performance, to towing, to steep grades. To make these headers last, Thorley made them out of durable 14-gauge mild steel with 3/8 in. thick flanges and 5/16 in. collector rings or 13 gauge stainless steel with ½ in. thick flanges and topped them off with a good looking, nickel chrome plated finish or a high temperature ceramic coating. To prevent leaks, these headers have an O-ring welded into the flange, in addition to the high-temperature gasket provided. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 20 )
$468.00
—
$1,485.00
When the stock power of your Ram is not enough for pulling serious weight, look no further than American Racing Headers Dodge and Ram Truck headers for increased performance, great sound, and quality you can trust. Featuring mandrel-bent, stainless steel mid-pipes and primaries, they are designed to allow you to reuse factory mufflers or attach to aftermarket exhaust systems. ARH Dodge and Ram Truck headers are available for a variety of engines, including those with square-port or D-port cylinder heads, and transmissions. Sold with or without catalytic converters, they feature efficient, high-flow, state-of-the-art merge collectors that are tuned for maximum horsepower and torque. Additional features of American Racing Headers Dodge and Ram Truck headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 3 )
$2,099.96
—
$3,193.01
Schumacher Creative Services Small Block Tri-Y under chassis headers give you high-flow header performance with a custom fit that means you don't have to sacrifice your power steering. They retain exhaust studs in the heads, so no more breaking into water jackets. Unlike most headers, they don't capture the starter, have excellent spark plug clearance, and are easily installed from the top down. Schumacher Small Block Tri-Y under chassis headers work with manual or power steering and automatic transmissions, and include gaskets and collectors. Additional notes: * Requires smaller than stock starter * Requires 90-degree oil filter adapter or shorty oil filter * Tri-Y step-up design * 14-gauge steel tubing * 3/8 in. flanges at the head * Mandrel-bent for smooth flow
Not Yet Reviewed
$939.00
JR Race Car Jr. dragster headers are high-quality steel headers with a chrome finish. Available in multiple styles to fit your needs and and engine size, they include all mounting hardware required for a quick and easy installation. If you're looking for a way to boost the performance of your race car, JR Race Car Jr. dragster headers are the perfect addition.
Not Yet Reviewed
$160.84
American Racing Headers 6th Generation Camaro headers are designed to work with ARH's midsection X-pipes and H-pipes to handle huge power, even on supercharged applications. Available with or without catalytic converters, they are offered in a variety of primary sizes and collector diameters. Each primary tube is sized to generate the greatest horsepower with the least amount of restriction. Efficient, state-of-the-art merge collectors are tuned for maximum horsepower and torque. Available in a choice of styles, Gen 6 ARH long systems are designed to allow you to reuse your factory mufflers or attach to aftermarket axle-back exhausts with a simple mark and cut (no welding required). Gen 6 intermediate systems use the factory mufflers and mid-pipes for a more cost effective way to get the power and performance ARH's long tube headers and X-pipes can produce. Additional features of American Racing Headers 6th Generation Camaro headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware for installation * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$2,298.70
—
$3,000.90
American Racing Headers 5th Generation Camaro headers are designed to work with ARH's midsection X-pipes and H-pipes to handle huge power, even on supercharged applications. Available with or without catalytic converters, they are offered in a variety of primary sizes and collector diameters. Each primary tube is sized to generate the greatest horsepower with the least amount of restriction. State-of-the-art, high-flow merge collectors are tuned for maximum horsepower and torque. Available in a choice of styles, Gen 5 ARH long systems are designed to allow you to reuse your factory mufflers or attach to aftermarket axle-back exhausts with a simple mark and cut (no welding required). Short systems typically require minor fabrication to adapt to the midsections of either factory or aftermarket exhausts. Gen 5 Shorty headers are a direct fit to your factory cats; some modification may be required. Additional features of American Racing Headers 5th Generation Camaro headers include: * Offered for V6 and V8 applications * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware for installation * The only set of headers you should ever need to buy
( 1 )
$1,530.26
—
$2,901.54
American Racing Headers Dodge Viper and SRT Viper headers deliver incredible horsepower, torque, and sound. Offered in a variety of primary tube diameters, select models are specifically designed to work with late model Viper engine controllers. Featuring mandrel-bent, stainless steel mid-pipes and primaries, they are designed to allow you to reuse your factory mufflers or attach to aftermarket exhausts. ARH Dodge Viper and SRT Viper headers are available with or without catalytic converters and feature efficient, high-flow, state-of-the-art merge collectors. Additional features of American Racing Headers Dodge Viper and SRT Viper headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$3,043.49
—
$3,930.54
Unleash the power of your mid-engine Corvette with a set of these American Racing Headers C8 Corvette headers. They have been engineered for maximum horsepower and torque gains across the rpm range. Enjoy the new distinctive sound of these headers on your C8 Corvette! Additional features of American Racing Headers C8 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * All American Racing Headers exhaust systems are for off-road use only
Not Yet Reviewed
$2,373.41
—
$2,493.58
American Racing Headers C6 Corvette headers are available in a variety of primary sizes and your choice of X-pipe midsection diameters—either catted or non-catted. ARH uses the highest quality and best flowing metallic substrate catalytic converters available. These race-inspired systems are designed to splice into your factory or aftermarket exhaust with the included Grade 8 hardware and stainless-steel band clamps, where applicable, and require no necessary modifications for installation. Additional features of American Racing Headers C6 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
Not Yet Reviewed
$2,299.37
—
$2,873.00
American Racing Headers Cadillac CTS-V headers are designed to work with ARH's midsection X-pipes to handle huge power, even on supercharged applications. Available with or without catalytic converters, they are offered in a variety of primary sizes and collector diameters. Each primary tube is sized to generate the least amount of restriction and high-flow, state-of-the-art merge collectors are tuned for maximum horsepower and torque. Available in a choice of styles, Cadillac CTS-V long systems are designed to allow you to reuse your factory mufflers or attach to aftermarket axle-back exhausts with a simple mark and cut (no welding required). Cadillac CTS-V short systems use the factory mufflers and mid-pipes for a more cost effective way to get ARH power and performance. Additional features of American Racing Headers Cadillac CTS-V headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware for installation * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
Not Yet Reviewed
$2,053.60
—
$3,779.13
American Racing Headers Mopar B-body and E-body headers for rear-wheel drive Dodges and Plymouths are available for big block and small block engines. Offered in a variety of primary sizes and collector diameters, they provide a great fit, easy spark plug access, excellent ground clearance, and outstanding performance. Additional features of American Racing Headers Mopar B-body and E-body headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$1,623.00
—
$2,139.72
Gen 2 F-body and Nova X-body owners can now get a set of ultra-high quality headers that fit and perform great and will last indefinitely. They are available for Chevrolet small block engines and the incredibly popular LS-based engines that have made their way into many GM F-bodies. American Racing Headers 2nd Generation Camaro/Firebird and Nova X-body headers are available in a wide range of primary tube sizes; they offer both a great fit and outstanding performance. Small block headers work with straight or angle plug heads and are designed to fit cars with or without air conditioning and manual or automatic transmissions. Both LS and small block ARH headers offer easy plug access and excellent ground clearance on lowered vehicles. Additional features of ARH 2nd Generation Camaro/Firebird and Nova X-body headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$1,583.26
—
$1,715.76
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
