Exhaust Headers, Bolts, Collectors & More

ARP Chromoly Header Bolt Kits

ARP manufactures a variety of header bolt kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point heads.

4.83 out of 5 stars ( 349 )

$14.99

—

$55.99

Doug's Headers

Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 726 )

$440.34

—

$1,809.13

ARP Chromoly Header Stud Kits

ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.

4.32 out of 5 stars ( 63 )

$40.99

—

$123.99

Summit Racing™ Split Lock Bolt Kits

Summit Racing™ split lock bolt kits put a new twist on the theory of mechanical locking fasteners. These innovative bolts use a locking set pin built into the bolt itself—and when tightened, the set pin expands the bolt threads against the thread wall. This, in turn, provides a locking system without having to use any additional wires, locking compounds, or lock washers. To remove the split lock bolts, simply loosen the set pin and back out the fastener. They are available in a variety of thread sizes, for engine applications from the 1950s and up.

4.51 out of 5 stars ( 35 )

$37.99

—

$44.99

Hedman Street Headers

For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.

4.17 out of 5 stars ( 2504 )

$262.99

—

$1,065.99

Sanderson Headers

No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!

4.22 out of 5 stars ( 293 )

$376.87

—

$904.02

Patriot Clippster Headers

Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing

4.24 out of 5 stars ( 309 )

$298.13

—

$801.61

Hedman Elite Extreme-Duty Headers

If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.

4.18 out of 5 stars ( 397 )

$572.99

—

$875.99

Sanderson Headers Blockhugger Headers

You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.

4.35 out of 5 stars ( 316 )

$367.99

—

$800.03

Proform Self-Locking Wedge Header Bolts

Proform self-locking wedge header bolts get a grip on your headers that won't let go—until you're ready! These permanently assembled bolt sets feature special washers with super-hardened serrated teeth that, when torqued to 28 lbs.-ft., bite into and grab the bottom of the bolt head and the top surface of the header. Any bolt-loosening rotation is blocked by the wedge-locking action created by the washers' interfacing cams; but what's really impressive is that engine vibration—the enemy—increases the tension, making them even more secure! The bolts are re-useable and you can count on them to not fail. Proform self-locking wedge header bolts put an end to the constant tightening for a leak-free, headache-free future. They're available in different finishes and sizes for applications from 1965 and up.

4.61 out of 5 stars ( 66 )

$34.95

—

$37.95

Milodon Header Bolts

To protect your investment, you'll want to mount your headers with strong, reliable, quality hardware. Milodon header bolts fit the bill. They are made from rugged Grade 8 steel for extra-high strength and are heat-treated for added reliability. They have compact 3/8 in. hex heads, which allow for the use of a standard socket in those tight areas around and between header tubes. They also have a bright, classy looking gold iridited finish to complete the visual package.

4.83 out of 5 stars ( 54 )

$13.95

—

$19.95

Patriot Full-Length Street Rod Headers

Patriot full length street rod headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which result in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing that's available in your choice of bare or ceramic coated finishes, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing

4.62 out of 5 stars ( 13 )

$478.22

—

$702.77

Summit Racing™ Header Bolts

Summit Racing™ offers header bolts for a variety of engine applications, from 1955 and up. These stainless steel fasteners have small 3/8 in. hex heads for use with a box end wrench and a 9/16 in. head flange that eliminates the need for washers. For rebuild, restoration, or swap, replacement bolts from Summit Racing™ will properly secure your header.

5.0 out of 5 stars ( 14 )

$22.99

Summit Racing™ Extreme Duty Header Bolt kits

Summit Racing™ Extreme Duty exhaust manifold header bolts are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * Tensile strengths above 170,000 psi * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion

5.0 out of 5 stars ( 2 )

$29.99

On Sale

Mr. Gasket Header Bolts

Installing headers can sometimes be a real pain, due to the tight spaces and the location and shape of the tubes. Mr. Gasket can help make installation a little easier and also help prevent annoying exhaust leaks from under-tightened header bolts. They have both the socket-head and hex-head styles of header bolts available. Hex types are heat-treated Grade 5 steel and have smaller-than-standard heads to ease access in tight spaces. Socket-head bolts are made from stronger Grade 8 steel for added ruggedness and they're great for those really difficult-to-reach spots. Both styles have a protective black oxide finish.

4.2 out of 5 stars ( 46 )

$50.35

$9.15

—

$138.95

On Sale

Flowtech Headers

Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.

4.09 out of 5 stars ( 1005 )

$749.95

$182.71

—

$767.95

Schoenfeld Header Collectors

Fit your race car chassis with the flow of tried and true Schoenfeld header collectors. These slip-on, black painted steel collectors are designed to fit your racer and your wallet. Choose the right lengths, angles, and styles to fit the right and left sides of your race car. Available to fit three or four tubes, Schoenfeld Headers collectors are ready to replace your damaged or missing collectors and get you back in the race quickly and economically.

4.56 out of 5 stars ( 27 )

$19.99

—

$75.99

On Sale

Hooker Competition Headers

Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.91 out of 5 stars ( 955 )

$440.95

Hooker Competition Darkside Ceramic Coated Headers

Switch to the Darkside! Hooker Competition Darkside ceramic coated headers feature an exclusive proprietary black ceramic coating that offers a more refined texture and better appearance. They are manufactured from durable 16-gauge steel and have 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. These headers provide improved thermal resistance up to 1,700 degrees F, limiting heat migration through the header and reducing underhood temperatures. Unless otherwise noted, they are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.9 out of 5 stars ( 10 )

$819.95

—

$1,024.95

Patriot Full-Length Headers

Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing

4.1 out of 5 stars ( 193 )

$313.68

—

$878.46

On Sale

Moroso Header Bolts

Moroso header bolts are much stronger than stock and will last under even the most severe conditions. They are constructed of Grade 8 material, feature a black oxide finish, and standard hex head for easy installation.

4.38 out of 5 stars ( 13 )

$20.99

$18.89

Trans-Dapt Performance Header Bolts

You can try to install your headers with ordinary hardware, but it's not advisable. If it isn't impossible, it will be very difficult. However, Trans-Dapt Performance header bolts neatly solve the problem. They're specifically designed for the task. They're made from strong Grade 5 steel and have smaller-than-standard hex heads to make tightening in those difficult spots a whole lot easier.

4.94 out of 5 stars ( 31 )

$6.99

On Sale

Hooker RacingHeart Street Stock Headers

Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter

4.04 out of 5 stars ( 27 )

$306.95

Scott Drake Headers

Scott Drake headers are offered in a variety of sizes, materials, and finishes to enhance your vehicle's performance and style. Their selection is manufactured with thick precision-cut flanges and includes quality gaskets for leak-free sealing. Upgrade your classic with a set of Scott Drake headers.

3.59 out of 5 stars ( 80 )

$339.95