1962 DODGE Headers Exhaust

Summit Racing™ Split Lock Bolt Kits

Summit Racing™ split lock bolt kits put a new twist on the theory of mechanical locking fasteners. These innovative bolts use a locking set pin built into the bolt itself—and when tightened, the set pin expands the bolt threads against the thread wall. This, in turn, provides a locking system without having to use any additional wires, locking compounds, or lock washers. To remove the split lock bolts, simply loosen the set pin and back out the fastener. They are available in a variety of thread sizes, for engine applications from the 1950s and up.

4.51 out of 5 stars ( 35 )

$39.99

Hedman Street Headers

For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.

4.17 out of 5 stars ( 2504 )

$349.99

Schumacher Creative Services Big Block Tri-Y Under Chassis Headers

Schumacher Creative Services Big Block Tri-Y under chassis headers give you high-flow header performance and a custom fit that means you don't have to sacrifice your power steering. They fit great with most aftermarket aluminum heads with angled plugs, retain exhaust studs in the heads, and they don't capture the starter. Specifically designed for your application, Schumacher Big Block Tri-Y under chassis headers install quickly and painlessly, works with manual or power steering and automatic transmissions, and are available in different finishes. Select the ones you prefer.

Not Yet Reviewed

$939.00

On Sale

Mr. Gasket HEADLOCK Locking Header Bolts

Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.

4.63 out of 5 stars ( 48 )

$56.95

$37.93

Stage 8 Locking Header Fastener Kits

Stage 8's Grade 8 locking header fasteners use a patented system that consists of a grooved hex-head bolt or nut, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Once Stage 8 header fasteners are tightened down, they won't back out, eliminating leakage and blown header gaskets from loose bolts.

4.56 out of 5 stars ( 398 )

$82.79

Trans-Dapt Performance Header Bolts

You can try to install your headers with ordinary hardware, but it's not advisable. If it isn't impossible, it will be very difficult. However, Trans-Dapt Performance header bolts neatly solve the problem. They're specifically designed for the task. They're made from strong Grade 5 steel and have smaller-than-standard hex heads to make tightening in those difficult spots a whole lot easier.

4.94 out of 5 stars ( 31 )

$6.99

Sanderson Headers Blockhugger Headers

You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.

4.35 out of 5 stars ( 315 )

$509.11

Patriot Header Flange Kits

Patriot offers these precision-machined header flange kits for many popular engine families. These header flange kits come complete with premium gaskets and header bolts. Choose between 3/8 in. and weight-saving 5/16 in. flanges.

4.44 out of 5 stars ( 25 )

$54.86

—

$104.28

Schumacher Creative Services Big Block Tri-Y Header Collector Adapters

Schumacher Creative Services' Big Block Tri-Y header collector adapters fit their Big Block Tri-Y passenger car headers. These pairs of bare steel adapters include gaskets and hardware.

Not Yet Reviewed

$85.00

Trick Flow® Header Build Kits

Trick Flow® header build kits contain high-quality 304 stainless steel components with a natural finish for long-lasting good looks and unbeatable performance. These kits are not prefabricated weld-up parts like many others on the market; they're for automotive enthusiasts who want to build their own stainless steel headers. Only the header flanges and collectors are prefab, leaving the creativity in the hands of the builder. Each kit includes laser-cut flanges, J-bends, collectors, and filler diamonds to connect the tubes together. The construction possibilities are endless with a Trick Flow® header build kit.

3.5 out of 5 stars ( 2 )

$1,014.99