Headers Headers Exhaust - Systems KEYWORD - Free Shipping Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

American Racing Headers C7 Corvette Headers

American Racing Headers C7 Corvette headers are available with options that allow you to fine-tune your exhaust system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit, and ease of installation. Options include a variety of primary sizes and your choice of X-pipe midsection diameters, ARH's exclusive X-pipe forward location (on select models), and severe-duty cats. Long systems end at the rear axle and are a direct fit to stock or aftermarket axle-back exhausts. ARH also offers mid-length header systems; a more emissions friendly option for C7s. Their mid-length kits allow you to reuse the secondary set of factory cats combined with ARH's severe-duty catalytic converters. These systems improve performance yet significantly reduce the possibility of a check engine light. All ARH C7 kits are direct bolt ons; expect a quick and easy install with the included Grade 8 hardware, race-quality gaskets, and stainless steel band clamps (where applicable). They will surpass your expectations in quality and performance. Additional features of American Racing Headers C7 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you'll ever need to buy * All American Racing Headers exhaust systems are for off-road use only

5.0 out of 5 stars ( 1 )

$2,735.91

—

$2,908.16

American Racing Headers 5th Generation Camaro Headers

American Racing Headers 5th Generation Camaro headers are designed to work with ARH's midsection X-pipes and H-pipes to handle huge power, even on supercharged applications. Available with or without catalytic converters, they are offered in a variety of primary sizes and collector diameters. Each primary tube is sized to generate the greatest horsepower with the least amount of restriction. State-of-the-art, high-flow merge collectors are tuned for maximum horsepower and torque. Available in a choice of styles, Gen 5 ARH long systems are designed to allow you to reuse your factory mufflers or attach to aftermarket axle-back exhausts with a simple mark and cut (no welding required). Short systems typically require minor fabrication to adapt to the midsections of either factory or aftermarket exhausts. Gen 5 Shorty headers are a direct fit to your factory cats; some modification may be required. Additional features of American Racing Headers 5th Generation Camaro headers include: * Offered for V6 and V8 applications * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware for installation * The only set of headers you should ever need to buy

4.0 out of 5 stars ( 1 )

$1,934.36

Kooks Headers Header and GREEN Catted Connection Kits

Kooks Headers offers header and GREEN catted connection kits for applications such as Ford Mustang 2 V and 4 V engine models from 1996 and up. Pipes are mandrel-bent from 16-gauge 304 stainless steel. The GREEN catalytic converters are EPA verified 400 cell high-flow and are suitable for use with forced induction. All products are dyno-` and race-tested and designed for maximum power. Kits include all necessary hardware for installation.

Not Yet Reviewed

$3,714.62

On Sale

Hooker Super Competition Headers

With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.67 out of 5 stars ( 230 )

$1,499.95

$550.31

—

$1,699.95

On Sale

Hooker RacingHeart 3-Step Dragster Headers

Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)

5.0 out of 5 stars ( 1 )

$1,749.95

$1,573.95

Ultimate Headers 321 Stainless Steel Headers

Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors

4.6 out of 5 stars ( 5 )

$1,379.00

—

$2,849.00

JBA Performance Exhaust Competition-Ready Headers

JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.

4.02 out of 5 stars ( 98 )

$605.80

—

$1,387.25

Patriot Roadster/Sprint Car Headers

Patriot Roadster/Sprint Car headers are setting standards in style, quality, and performance for "Fad T" and '32 Hi-Boy headers. They offer T-buckets a choice between their classic or high performance Sprint-style headers for small and big block Chevy, as well as small block Ford engines. And if you want, you can match these headers with Patriot turnouts and integral mufflers for a complete exhaust system. Patriot Roadster/Sprint Car headers are available in a choice of finishes, including a show-quality chrome that is applied to headers that have been polished before and after assembly to assure ultimate chrome quality 360 degrees around all pipes. Additional finishes for Patriot Roadster/Sprint Car headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.06 out of 5 stars ( 17 )

$401.95

—

$870.00

Patriot Tri-5 Headers

Patriot's popular 1955-57 Chevy passenger car headers for small block, big block, and LS1/LS6 swaps offer superior performance and fit. These headers feature durable 18-gauge tubing, accommodate the GM 605 power steering box conversion, and fit most motor mounts. Their extra ground clearance makes "slammed" cars drivable and above-frame rail exhaust system installation easy. Patriot Tri-5 headers come with gaskets, header bolts, and collector reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects the headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection. * Raw steel is available for individual customizing

4.12 out of 5 stars ( 77 )

$470.00

—

$615.35

Kooks Headers Long Tube Headers

Kooks Headers long tube headers are heavy-duty and crack-resistant, featuring large diameter stainless steel construction (most applications) with smooth-flowing mandrel-bent tubing. They include gaskets, bolts, and oxygen sensor extensions where required. Also available as kits with connection pipes, depending on the application, Kooks long tube header kits include individual connection pipes, a Y-pipe, X-pipe, or H-pipe to connect to the exhaust system. X-pipes are used primarily for high-rpm performance and race applications. H-pipes create lower end power and are used on street cars for increased performance with a comfortable sound level. These connection pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers long tube headers and connection pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.

4.64 out of 5 stars ( 33 )

$2,487.30

—

$3,027.75

American Racing Headers Dodge Viper and SRT Viper Headers

American Racing Headers Dodge Viper and SRT Viper headers deliver incredible horsepower, torque, and sound. Offered in a variety of primary tube diameters, select models are specifically designed to work with late model Viper engine controllers. Featuring mandrel-bent, stainless steel mid-pipes and primaries, they are designed to allow you to reuse your factory mufflers or attach to aftermarket exhausts. ARH Dodge Viper and SRT Viper headers are available with or without catalytic converters and feature efficient, high-flow, state-of-the-art merge collectors. Additional features of American Racing Headers Dodge Viper and SRT Viper headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

5.0 out of 5 stars ( 1 )

$3,310.36

Stainless Works Header Builder Kits

Stainless Works offers a wide range of header builder kits for your customization projects. The 304 stainless steel header builder kits include two 3/8 in. thick laser-cut flanges (to be specified by customer), 12 J-bends (one 6 in. long leg and one 12 in. long leg), two formed collectors, and two filler diamonds to connect the tubes together. Specify desired flange style; and choose your primary tube and collector diameters. All tubes are mandrel-bent for optimal flow in the J-bends. Order the header builder kit with options desired for your exhaust system.

Not Yet Reviewed

$926.25

Stainless Works Turbo Header Kits

Stainless Works offers turbo header kits for a variety of vehicles and applications—including fitment with AFR and Victor small block heads. In the "down and forward" turbo kits, the header flanges are made with 3/8 in. thick 304 stainless steel, and the tubing is .065 wall 304 stainless steel with 1 7/8 in. primaries and 3 in. slip-fit collectors. 3 in. V-band flanges and clamps are provided and welded on for both headers to crossover connections. Each complete system is TIG-welded and back purged for maximum performance. Kits contain headers, 3 in. x .065 wall 304 stainless steel crossover tube and 3/8 in. stainless steel turbo flange welded onto outlet. Also included: 7-gauge 304 stainless steel turbo mounting bracket, 1/4 in. thick aluminum motor plate, and 304 stainless steel downpipe with is coned from 5 in. to 4 in. diameter with a 90 degree bend and 12 in. minimum length leg on the outlet side. (Customer is required to provide 5 in. V-band flange for welding to inlet of downpipe.) Order the turbo header kit recommended for your vehicle.

Not Yet Reviewed

$4,270.25

Stainless Works Performance Headers

Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.

4.5 out of 5 stars ( 30 )

$2,180.25

—

$2,655.25

Stainless Works Stainless Power Headers

Stainless Power products are designed by Stainless Works, and made exclusively to our exact specifications from the highest quality 304 stainless steel. Factory manifolds can be restrictive and hold back the true potential of your ride. Stainless Power headers unlock the power of your engine. Our long tube, free-flowing design reduces back pressure, and will bring new found power that you can feel and hear.

4.83 out of 5 stars ( 18 )

$1,614.05

—

$1,709.05

Kooks Headers Race Long Tube Headers

Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.

4.83 out of 5 stars ( 66 )

$1,264.53

—

$1,436.92

16 Results Found For "Systems"