Availability
Showing In Stock Items. Show All 23 Items.
They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.
( 415 )
$388.99
Ultimate Headers 321 Stainless Steel Headers integrate a cutting-edge, patented design, created specifically for maximum performance and minimal weight, with 3D-engineered flanges, and superior 321 stainless steel to deliver a unique combination of elegance and horsepower. Born in World War II for aircraft engine exhaust manifolds by adding titanium to basic nickel/chromium alloy steel, 321 stainless provides reduced weight, plus increased resistance to material fatigue and thermal cracking in high-heat environments. Finite Element Analysis (FEA) processes are used to create Ultimate Headers and the unique Ultimate Flanges with their signature, high-tech, ribbed reinforcements that reduce weight, improve flange cooling, and lessen heat-induced warpage; while providing the required clamping forces to eliminate leakage. Ultimate 321 Stainless Steel Headers' tight radius, investment-cast, 316L stainless steel elbows immediately turn the header tubes away from the exhaust ports with a radius smaller than the tube diameter (which can't be done using a tube bender); holding the header tubes close to the block—perfect for engine swaps. Investment casting also maintains the desired wall thickness and avoids the thinner sidewall created by tube bending at the point where exhaust gas temperature and volume are at their highest. These benefits, combined with the advanced Cometic MLS (multi-layer stainless steel) header gaskets included with each set of headers, give Ultimate Headers 321 Stainless Steel Headers the leading edge when it comes to adding a total performance-enhancing exhaust system. Features include: * Patented design * Includes premium corrosion and heat-resistant ARP 12-point, 300 grade stainless steel bolts and washers * Jig fixture, TIG-welded for precise quality control * Easy to install * Header tubes are mounted high and tight for a compact, space efficient package away from steering shafts and frame rails * Eye-catching flanges add dramatic improvement to the engine compartment * Available styles include rear-dump and block-hugger designs * Available in a variety of finishes, including mill, satin, mirror polish, ceramic coated silver, and ceramic coated black *Ultimate Headers Cast Header Flanges or Extreme Low-Profile Clamps (both sold separately) are recommended for the end of the collectors
( 5 )
$1,379.00
—
$2,849.00
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$622.25
—
$1,307.65
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2462 )
$366.99
—
$659.99
On Sale
Hooker Blackheart headers deliver premium performance with a reasonable price. Hooker utilizes stainless steel and mild steel for construction of these headers designed for optimum flow, maximum velocity, and ground clearance. Whether you're looking for shorty headers or long tube, Blackheart headers are available in a variety of styles and sizes to fit a wide selection of vehicles from luxury rides to sports cars, modern muscles, and even trail-blazing rigs. When it's time to tear the heart out of the competition, choose Blackheart from Hooker!
( 51 )
$849.95
—
$1,449.95
$763.95
—
$1,303.95
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 26 )
$972.90
—
$1,325.70
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 992 )
$308.95
—
$549.95
$278.05
—
$357.95
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 290 )
$456.21
—
$720.69
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 300 )
$509.79
—
$754.49
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$374.99
On Sale
These Flowmaster Scavenger Series Elite headers open up airflow for serious added power. All Scavenger Series Elite headers are made of high-quality stainless steel and have been polished ceramic coated. They are available in several styles, such as shorty, full-length, and block hugger to accommodate a large variety of vehicles. They have a standard flange design and include bolts and gaskets for installation. Get yourself a set of these Flowmaster Scavenger Series Elite headers to keep yourself ahead of the competition.
( 68 )
$1,159.95
$1,042.95
Cometic offers exhaust header bolt kits for a wide range of Chevrolet, Cadillac, Pontiac, Avanti, and Buick cars and trucks from 1997 and up. This specialized hardware is machined from Grade 5 carbon steel. The bolts are perfect for header applications where space is limited. They have a combination of 6 pt. socket and 6 pt. Allen head for ease of installation. Each features a compact head and is finished in black oxide for corrosion protection.
Not Yet Reviewed
$13.64
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 498 )
$909.25
—
$1,051.95
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 250 )
$428.10
—
$657.80
Get conventional for your Circle Track Street Stock with Schoenfeld headers. Their steel Street Stock headers offer bolt-on performance and a great price. Schoenfeld specializes in competition products, and their headers are available in dozens of configurations, flange styles, and tube diameters. Make some power to perform; order the headers recommended for your vehicle. (Special warning regarding Schoenfeld painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 49 )
$292.99
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$940.55
—
$1,100.25
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 64 )
$1,785.27
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$1,528.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
