Filters
X-type dual exhausts help engines make more power by reducing exhaust reversion and scavenging cylinders better, to counter the uneven exhaust pulses of a V8's firing order. With Summit Racing™ universal X-pipe kits, you can fabricate a custom "X" system for just about any performance vehicle. Kits are available in several large tubing diameters and include all of the essential pieces--that means four 45 degree mandrel-bent sections of tubing (which you trim to size), the prefabricated X-section that is the heart of the systems, and the heavy-duty clamps to hold them all together. They're made for off-road use only.
( 215 )
$135.99
—
$239.99
Doug's Headers Y-pipe kits help to balance exhaust pressure, resulting in increased low-rpm power. These kits include all of the necessary parts and pieces to connect Doug's headers to the factory or aftermarket catalytic converter.
( 28 )
$289.45
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$893.99
—
$1,008.99
Get more low-rpm torque from your dual-exhaust system with one of these Summit Racing™ balance tube kits. They include everything you need for most applications—straight and V-shaped lengths of tubing (one of which will clear your driveshaft), two prefabricated T-pipe connectors, and six heavy-duty muffler clamps. These universal crossover pipes are available in various diameters, materials, and finishes.
( 200 )
$83.99
—
$160.99
AP Exhaust Y-pipes are direct-fit OE replacements. They are made from aluminized heavy-gauge steel with re-aluminized weld seams to prevent corrosion. Make repairs to your exhaust system with AP Exhaust Y-pipes.
( 13 )
$24.79
—
$228.99
Let your engine breathe easy! Pypes off-road X-pipes are free-flowing, with reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses, rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a Siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipes quicker, and this improved "breathing" increases horsepower. Pypes X-pipes' high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated pipes resist corrosion and extend the life of your system.
( 81 )
$205.97
—
$362.97
Our Summit Racing™ X-pipes are an affordable way to open up your exhaust system and add power to your vehicle. They feature mandrel-bent tubing to reduce backpressure. These X-pipes do not include catalytic converters and are for off-road use only.
( 78 )
$88.99
—
$149.99
Black Widow Exhaust X-pipes are mandrel bent out of stainless steel and quality-welded for maximum strength. Designed for maximum performance and sound, Black Widow's X-pipes balance exhaust flow and sound and promote scavenging. They are available in 2.5 in. and 3 in. diameters, can be welded on or clamped on, and are backed by Black Widow Exhaust's Lifetime Limited Warranty.
( 3 )
$74.00
—
$79.00
Borla X-pipes will not only increase the amount of power that your vehicle produces, but also give your muscle, sports, or luxury car a more aggressive sound. Crossover pipes let your exhaust gasses flow through the path of least resistance, balancing the pulses between engine banks—and achieving best performance gains in the higher rpm range. These X-pipes are built from lightweight, aircraft-grade T-304 stainless steel, and are available in various configurations and tubing diameters. They are a perfect complement to Borla's cat-back and header systems.
( 36 )
$297.99
—
$1,175.99
Summit Racing™ Turbo Crossover Pipe Kits connect the single turbo exhaust manifolds to the opposite side of the engine to complete your turbine inlet. We offer versions for an optimal fit with our single turbo manifolds to work with most transmissions and bellhousings. They're built from 16-gauge, mandrel-bent 304 stainless steel--and use slip-fit or welded-on V-band flanges for an easy bolt-on fit. Clamps are included.
( 2 )
$249.99
If you are building your own exhaust, then you need Vibrant Performance 2-1 merge collectors. They are made out of T304 stainless steel that is durable enough to stand up to heat and the elements. To ensure their durability and consistency, they use only the best components that are fully TIG-welded and inspected for quality. The hand porting inside of the collectors ensures unrestricted, smooth exhaust flow to prevent power loss due to excessive backpressure. These Vibrant Performance 2-1 merge collectors are offered in a whole variety of inlet and outlet combinations to complement any exhaust setup you can think up.
( 29 )
$99.99
—
$142.99
Hooker LS turbo crossover tubes connect the two turbo exhaust manifolds. Hooker offers several versions (including a universal component kit) for an optimal fit and ground clearance based on your transmission and bellhousing. The crossover tubes are made from 16-gauge, mandrel-bent 304 stainless steel, and include flex joint and V-band flanges welded on for an easy bolt-on fit. Join your LS turbo manifolds for performance with Hooker crossover tubes.
( 13 )
$290.95
—
$454.95
Erase the dead zone for greater power and less turbulence with Twisted Steel Y-pipes from aFe. The fantastic fit and finish on the mitered mandrel-bent stainless steel pipes allow for a transition from 3 in. to 3.5 in. collector, while high-caliber flanges and band clamps aid in an easy installation process to your stock exhaust. The 400 CPSI catalytic converters increase flow and help prevent "check engine" issues created during combustion.
Not Yet Reviewed
$310.00
—
$836.00
Transition your ride to give it the performance curve it deserves--install Jones Exhaust stamped X-pipes! Available in stamped aluminized steel or stainless steel, these X-pipes offer increased power and torque, equalized backpressure pulses, and maximum scavenging of spent gases. They also reduce interior resonance and are compact in design for ease of installation. Make your vehicle sound and perform at the highest level with stamped X-pipes from Jones Exhaust.
( 169 )
$35.99
—
$65.99
Steeda S550 Mustang GT 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 13 )
$294.95
Roush 2015-24 Mustang GT resonator delete H and X-pipes offer an affordable way to eliminate your factory resonator for amazing race-inspired sound. These delete pipes also increase flow through your GT exhaust system for maximum horsepower and torque. The assemblies are made from 2.5 in. high-grade, mandrel-bent stainless steel to ensure maximum flow with less backpressure and long-lasting durability. Roush systems are designed and engineered using OEM vehicle CAD data to ensure a perfect fit. How about a quick and easy way to improve the sound and performance of your 2015-24 Mustang on the road? Roush GT resonator delete H and X-pipes will provide exactly what you want. Order the model recommended for your vehicle. Features include: * Reduce backpressure and improve the flow of your Mustang's exhaust system for maximum horsepower, torque, and overall performance * Pipes are made with high-quality stainless steel for durability and corrosion resistance * Eliminate the factory resonator to give your vehicle a race car-like growl and more aggressive sound * Pipe is mandrel-bent to ensure consistent flow * 12 lb. weight reduction over stock muffler assembly * Installation is quick and easy, with no vehicle modifications required * Include all necessary hardware
( 14 )
$249.99
Gibson crossover pipes bolt directly to your vehicle's OEM manifolds, replacing the stock H-pipe and converters. These mandrel-bent pipes provide better noise cancellation and scavenging effect, producing increased horsepower and torque. They are for off-road and race use only. For better flow and go, buy Gibson crossover pipes.
( 1 )
$466.99
Walker direct-fit Y-pipes provide a solid merger solution between the manifold and muffler(s). These exhaust components will attach to your vehicle without any modifications. They're manufactured from steel and feature an aluminized coating for protection against corrosion. Choose the Y-pipe size and configuration designed for your specific make and model.
( 205 )
$23.99
—
$375.99
X-pipes are used primarily for high-rpm performance and race applications. Kooks Headers X-pipes are heavy-duty and crack-resistant, featuring large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. Most are designed to be used with Kooks long tube headers. Some applications require cutting the factory exhaust system. Select models connect to the OEM connection point. Kooks Headers X-pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers X-pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 10 )
$596.46
—
$2,353.21
MagnaFlow manifold exhaust Y-pipes offer more power than stock. These stainless steel Y-pipe assemblies look good and fit good, like performance exhaust should! Replace your factory setup with MagnaFlow manifold exhaust Y-pipes.
( 11 )
$267.00
—
$598.00
DC Sports Y-pipes are top-tier upgrades for your Nissan or Infiniti, designed to enhance performance and reliability. Compatible with a wide range of models, the pipes are engineered to deliver noticeable gains in exhaust flow and power. They are constructed from premium 2.5 in. stainless steel and are mandrel bent for smooth, unrestricted exhaust flow, while TIG welding ensures a durable, high-quality finish. DC Sports Y-pipes are designed for easy installation, bolting directly to your factory headers or specific DC Sports headers without the need for modification. They eliminate the factory flex section to not only improve ground clearance but also reduce the risk of leaks, giving you a more robust and reliable exhaust system. Whether you're looking to boost your performance or simply replace worn-out factory parts, DC's Y-pipes offer an effective solution that delivers both power and durability.
( 1 )
$227.99
If you need a Y-pipe for your exhaust system, and your needs match their available configurations, you can't go wrong with Borla. With their large diameters and smooth bends, Borla Y-pipes are great for maintaining high flow rates. And they're made from the highest quality stainless steel, so you never have to worry about them rusting.
( 2 )
$679.99
—
$784.99
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 48 )
$127.00
—
$1,605.00
"X" marks performance! Stainless Works X-pipe kits are crafted from 304 stainless steel and designed to add greater flow and power to your ride. They are available in off-road and catted options—and they require no modifications, drilling, or cutting. The hunt for better exhaust performance ends with Stainless Works X-pipe kits.
( 4 )
$242.25
—
$384.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
