Availability
Showing In Stock Items. Show All 31 Items.
MagnaFlow manifold exhaust Y-pipes offer more power than stock. These stainless steel Y-pipe assemblies look good and fit good, like performance exhaust should! Replace your factory setup with MagnaFlow manifold exhaust Y-pipes.
( 11 )
$242.25
—
$452.20
Summit Racing™ Turbo Crossover Pipe Kits connect the single turbo exhaust manifolds to the opposite side of the engine to complete your turbine inlet. We offer versions for an optimal fit with our single turbo manifolds to work with most transmissions and bellhousings. They're built from 16-gauge, mandrel-bent 304 stainless steel--and use slip-fit or welded-on V-band flanges for an easy bolt-on fit. Clamps are included.
( 2 )
$249.99
Borla X-pipes will not only increase the amount of power that your vehicle produces, but also give your muscle, sports, or luxury car a more aggressive sound. Crossover pipes let your exhaust gasses flow through the path of least resistance, balancing the pulses between engine banks—and achieving best performance gains in the higher rpm range. These X-pipes are built from lightweight, aircraft-grade T-304 stainless steel, and are available in various configurations and tubing diameters. They are a perfect complement to Borla's cat-back and header systems.
( 37 )
$399.99
—
$970.99
On Sale
Corsa off-road X-pipes upgrade your vehicle with high-quality stainless steel and race car-like sound. They feature mandrel-bent tubing and Corsa RSC technology that delivers a drone-free experience during cruise.
( 3 )
$1,008.99
$908.09
Walker direct-fit Y-pipes provide a solid merger solution between the manifold and muffler(s). These exhaust components will attach to your vehicle without any modifications. They're manufactured from steel and feature an aluminized coating for protection against corrosion. Choose the Y-pipe size and configuration designed for your specific make and model.
( 203 )
$67.99
—
$397.99
Gibson crossover pipes bolt directly to your vehicle's OEM manifolds, replacing the stock H-pipe and converters. These mandrel-bent pipes provide better noise cancellation and scavenging effect, producing increased horsepower and torque. They are for off-road and race use only. For better flow and go, buy Gibson crossover pipes.
( 1 )
$466.99
On Sale
Hooker LS turbo crossover tubes connect the two turbo exhaust manifolds. Hooker offers several versions (including a universal component kit) for an optimal fit and ground clearance based on your transmission and bellhousing. The crossover tubes are made from 16-gauge, mandrel-bent 304 stainless steel, and include flex joint and V-band flanges welded on for an easy bolt-on fit. Join your LS turbo manifolds for performance with Hooker crossover tubes.
( 13 )
$433.95
$287.95
—
$499.95
Updating your exhaust with Walker direct-fit H-pipes can offer your system maximum flow. They're designed to fit with factory exhaust manifolds or aftermarket headers, and they bolt on easily without any modifications. Walker direct-fit H-pipes are manufactured from mild steel and feature an aluminized finish for protection against corrosion. Choose the pipes that match the exhaust set-up for your particular make and model.
( 17 )
$71.99
—
$120.99
Summit Bucks
Modify your exhaust system for maximum flow and performance with Dynomax X-pipes. They're designed to fit with factory exhaust manifolds or aftermarket headers, and they install easily with some modifications. Dynomax X-pipes are available in stainless steel construction, or mild steel with an aluminum finish for protection against corrosion. Choose the style and pipe diameter to meet the needs of your vehicle.
( 12 )
$120.99
—
$377.99
On Sale
MBRP X-pipes fit your stock manifold with increased power and efficiency. They are made of stainless steel for lasting performance and are polished for lasting looks. MBRP X-pipes are fairly easy to install and are well worth the effort.
( 3 )
$174.99
—
$419.99
$139.99
—
$335.99
On Sale
JBA Performance Exhaust Y-pipes are engineered and manufactured to complement JBA's 50-state legal Cat4ward headers. They're made from quality mandrel-bent tubing for good fit and durability. Plus, they're designed for an easy bolt-on installation, so you won't have a hassle getting them mounted. Hardware is included.
( 27 )
$368.15
—
$398.40
$331.34
—
$358.56
On Sale
Get the most from your exhaust with JBA Performance Exhaust X, H, and Y-pipes. These system upgrades equalize the exhaust flow to enhance performance from your JBA headers. Some configurations include a catalytic converter. Choose the style and size to blend with your exhaust setup. X, H, and Y-pipes are ideal for direct replacement, racing, or off-road applications.
( 18 )
$398.40
$358.56
Our Summit Racing™ X-pipes are an affordable way to open up your exhaust system and add power to your vehicle. They feature mandrel-bent tubing to reduce backpressure. These X-pipes do not include catalytic converters and are for off-road use only.
( 81 )
$141.99
—
$149.99
On Sale
Roush 2015-24 Mustang GT resonator delete H and X-pipes offer an affordable way to eliminate your factory resonator for amazing race-inspired sound. These delete pipes also increase flow through your GT exhaust system for maximum horsepower and torque. The assemblies are made from 2.5 in. high-grade, mandrel-bent stainless steel to ensure maximum flow with less backpressure and long-lasting durability. Roush systems are designed and engineered using OEM vehicle CAD data to ensure a perfect fit. How about a quick and easy way to improve the sound and performance of your 2015-24 Mustang on the road? Roush GT resonator delete H and X-pipes will provide exactly what you want. Order the model recommended for your vehicle. Features include: * Reduce backpressure and improve the flow of your Mustang's exhaust system for maximum horsepower, torque, and overall performance * Pipes are made with high-quality stainless steel for durability and corrosion resistance * Eliminate the factory resonator to give your vehicle a race car-like growl and more aggressive sound * Pipe is mandrel-bent to ensure consistent flow * 12 lb. weight reduction over stock muffler assembly * Installation is quick and easy, with no vehicle modifications required * Include all necessary hardware
( 14 )
$249.99
$224.99
Summit Racing™ resonator delete pipe kits give your Mustang a more aggressive exhaust note and increase horsepower and torque. These kits are an affordable way to replace the restrictive factory mid-pipe resonator on your 2015-later Mustang to reduce back pressure and increase exhaust flow. They also weigh less than the factory resonator and are fairly easy to install. Summit Racing™ delete pipe kits are available with "X" or "H" pipe designs in mild or stainless steel. Kits install after the factory catalytic converters and clamp in place after removal of the resonator.
( 29 )
$190.99
—
$217.99
On Sale
Steeda Mustang 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 14 )
$299.95
$269.99
Free-flowing, mandrel-bent Pypes Street Legal X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. They include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 7 )
$831.79
On Sale
Make your street ride a sweet ride with Corsa XO-pipes. These crossover pipes will provide balanced exhaust flow, equaling increased power and better throttle response with a cleaner, crisper sound for your baby. Corsa's full-length XO-pipes are made of 16-gauge 304L stainless steel with mandrel bends for beauty and strength. XO-pipes are designed to bolt on after the catalytic converter and come complete with installation instructions, all necessary hardware, and gaskets so that you'll have time to enjoy a quiet, no-drone cruise.
( 6 )
$516.99
—
$845.99
$465.29
—
$761.39
Scott Drake offers H-pipes for a wide range of vehicles from the 1960s and '70s. These crossover exhaust pipes are mandrel-bent from steel, then aluminized for long-lasting performance. They're available in many sizes and configurations for fitment on specific applications.
( 11 )
$163.95
On Sale
Flowmaster Scavenger X-pipes provide gains in horsepower and torque without sacrificing the classic Flowmaster sound. These X-pipes feature Flowmaster's patented Scavenger D-port technology designed to create a larger surface area that actually pulls gasses along faster—delivering a significant torque improvement and maximize exhaust scavenging. The pipes are constructed from mandrel-bent stainless steel or aluminized steel and are offered in different diameters to help you find the one that will complement the rest of your exhaust system. Performance gains for your car or truck begin with Flowmaster Scavenger X-pipes. Features include: * Available in universal kits or for direct-fit applications * Dyno-tuned for maximum performance * Race-proven technology
( 7 )
$449.95
$399.95
—
$699.95
On Sale
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$849.95
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 49 )
$839.80
On Sale
When you're investing in a new exhaust system--or part of one--you want it to last. That applies to Y-pipes, as well. Stainless Works high-flow Y-pipes are made from quality 304 stainless steel. Like nearly all of Stainless Works' exhaust systems, they're CNC mandrel-bent to ensure a good fit and sealing. In addition, they're available either with catalytic converters for street use, or without them for off-road use. Order the model recommended for fitment on your vehicle.
Not Yet Reviewed
$731.50
$616.00
On Sale
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$649.95
$493.95
—
$1,499.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
