Availability
Showing In Stock Items. Show All 12 Items.
Black Widow Exhaust X-pipes are mandrel bent out of stainless steel and quality-welded for maximum strength. Designed for maximum performance and sound, Black Widow's X-pipes balance exhaust flow and sound and promote scavenging. They are available in 2.5 in. and 3 in. diameters, can be welded on or clamped on, and are backed by Black Widow Exhaust's Lifetime Limited Warranty.
( 3 )
$74.00
—
$79.00
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$849.95
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$549.95
—
$1,499.95
If you're looking to design your exhaust for a single inlet dual, dual outlet setup Jones Exhaust stamped Y-pipes are aluminized steel available in many diameters and configurations. They offer better balance between cylinder banks and consistent flow in tight constrained areas. The result? A significant increase in both power and torque, but a reduction in db sound levels to give you the best of both worlds. Serious about exhaust performance? Do a Jones Exhaust Y-pipe install--give your ride the performance curve it deserves!
( 115 )
$23.99
—
$26.99
Our Summit Racing™ X-pipes are an affordable way to open up your exhaust system and add power to your vehicle. They feature mandrel-bent tubing to reduce backpressure. These X-pipes do not include catalytic converters and are for off-road use only.
( 81 )
$88.99
—
$100.99
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 49 )
$131.00
Ideal for applications where space is limited, these Summit Racing™ narrow universal X-pipe kits are made of top-quality materials with a top-quality finish. These kits are offered in a choice of sizes to suit your needs.
( 14 )
$93.99
—
$120.99
Transition your ride to give it the performance curve it deserves--install Jones Exhaust stamped X-pipes! Available in stamped aluminized steel or stainless steel, these X-pipes offer increased power and torque, equalized backpressure pulses, and maximum scavenging of spent gases. They also reduce interior resonance and are compact in design for ease of installation. Make your vehicle sound and perform at the highest level with stamped X-pipes from Jones Exhaust.
( 170 )
$54.99
Jones Exhaust Traditional Y-pipes easily change the aesthetic look of your vehicle by changing your single exhaust system into a dual exhaust system. These universal Y-pipes are all-welded and made out of 100 percent aluminized steel to provide performance that you can rely on.
( 27 )
$18.99
"X" marks performance! Stainless Works X-pipe kits are crafted from 304 stainless steel and designed to add greater flow and power to your ride. They are available in off-road and catted options—and they require no modifications, drilling, or cutting. The hunt for better exhaust performance ends with Stainless Works X-pipe kits.
( 4 )
$275.50
Let your engine breathe easy! Pypes off-road X-pipes are free-flowing, with reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses, rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a Siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipes quicker, and this improved "breathing" increases horsepower. Pypes X-pipes' high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated pipes resist corrosion and extend the life of your system.
( 82 )
$226.97
—
$341.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
