Availability
Showing In Stock Items. Show All 129 Items.
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 532 )
$2,016.99
—
$4,738.99
Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.
( 132 )
$2,002.99
—
$2,502.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 154 )
$2,031.99
—
$2,623.99
Crafted with precision and power in mind, Corsa Xtreme valved exhaust systems boast premium 304 stainless steel construction, Corsa-designed valves, double Helixx X-pipe, and custom-tuned mufflers tailored to the specific engine. Seamlessly integrating with the OEM Active Exhaust functionality, these precision acoustic tuned Xtreme systems unleash over 8+ decibels beyond the OEM exhaust with the valves open, delivering thunderous exhaust notes at your command. They capture attention during cold starts and heavy acceleration while ensuring a quiet, drone-free cabin during cruising, all thanks to Corsa's pioneering No Drone RSC technology. Designed with a straight-through muffler construction, Corsa's exhaust increases flow by nearly 20 percent, enabling drivers to optimize the benefits of any performance modification. Elevating the aesthetic appeal, these system features striking 4.5 in. dual-wall stainless steel exhaust tips available in slash cut or straight cut in polished or black PVD finishes. Choose the packaged desired for your vehicle.
( 1 )
$2,999.99
Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.
( 286 )
$2,066.99
—
$2,793.99
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 924 )
$2,012.99
—
$5,334.99
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 280 )
$2,008.99
—
$2,699.99
Are you tired of excessive cabin drone? Good news! Borla took your criticisms to heart and developed a new Sport system, the S-Type II Cat-Back exhaust systems, a mid-range sounding system that's not too loud and it's not too quiet. The S-Type II still employs all the same great qualities of Borla's Sport (also known as Stinger) but without annoying, obnoxious cabin drone.
( 5 )
$2,266.99
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 240 )
$2,011.99
—
$2,599.99
MagnaFlow xMOD Series performance exhaust systems offer unrivaled exhaust performance! These revolutionary, fully modular exhaust systems will allow you to easily personalize and fine-tune to the power and sound you want. They also offer the benefits that MagnaFlow premium exhaust is known for—lifetime warrantied stainless steel construction and dyno-proven performance featuring straight-through mufflers and fast-flowing mandrel bent pipes. Together with the xMOD modules and deletes that provide configurable flow and sound levels, your vehicle's exhaust moves to the next level with support for your present—and future power needs. The power and sound is yours with MagnaFlow xMOD Series premium performance exhaust systems. MagnaFlow xMOD Series features: * xMOD muffler modules offer MagnaFlow's proven straight-through design and race-bred quick-release V-band clamps for quick installation and removal for when you want that race car sound, instead of the deep, aggressive signature MagnaFlow exhaust note * xMOD xTreme deletes are equipped with the same quick-release V-band clamps allowing for the removal of the muffler modules for that xTreme sound experience. Use of the xTreme deletes is recommended for track use only. * Opti-Flow modules feature a fast-flowing mandrel-bent stainless steel design optimized for stock power, plus minor modifications * xTreme Flow modules feature increased flow capacity mandrel-bent big bore design for big power modification support
( 1 )
$3,089.00
—
$4,881.00
Borla S-Type mid-section (60731) exhaust systems feature 3 in. diameter pipes and the classic S-Type sound. They fit with either the OE tailpipes or Borla tailpipes 60640, 60640BC, or 60640CFBA. Borla cat-back and axle-back exhaust systems boast patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. These exhaust systems are built from premium T-304 stainless steel to give you the absolute best in performance and durability. Ultra-smooth mandrel bends facilitate maximum flow and power; and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Order the system recommended for your truck.
( 2 )
$2,999.99
Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Variable Sound exhaust systems employ a straight-through, non-restrictive design. They're coupled with Corsa's patented reflective sound cancellation science—to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. These exhaust systems also integrate directly to the stock NPP valve actuator and also reuse the NPP module. The Corsa Variable Sound exhaust systems are built from premium stainless steel with mandrel bends—and are available with your choice of polished or black tips. Developed to fit right, Corsa exhausts install quickly with no cutting or welding. They're bold when you want them to be, and quiet when you need them to be.
( 2 )
$2,784.99
—
$3,690.99
On Sale
Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.
( 4 )
$2,699.95
$2,158.95
—
$2,428.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 600 )
$2,058.00
—
$2,254.00
MagnaFlow Competition Series exhaust systems are designed for those seeking maximum performance, reduced mass, and an aggressive exhaust note that demands attention. They feature all mandrel-bent tubing and 409 stainless steel construction. These kits are available in numerous configurations, including cat-back and rear axle-back styles; single or dual mufflers; and one, two, or four outlets. Many tip options are offered, as well. MagnaFlow Competition Series exhausts increase your horsepower and torque for better results on the track, and they carry a lifetime construction warranty. (The systems may not comply with all local or federal noise requirements.) Order the sizes and setup tailored for fitment on your specific make and model.
( 28 )
$2,019.00
—
$3,399.00
Magnaflow Overland Series performance exhaust systems provide the performance and versatility your off-road adventures demand. Explore further with a high clearance design that improves ground clearance, combined with robust stainless steel construction to withstand the toughest terrain. All Overland Series products have been specifically tuned to be comfortable for long drives—while still bringing out the unique character of your rig. Order the model recommended for your application.
( 9 )
$3,707.00
On Sale
APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty
Not Yet Reviewed
$3,799.95
$2,199.95
—
$3,418.95
Borla's ATAK connecting pipes system contains their unique SwitchFire X-Pipe technology that eliminates the turbulent center intersection of a standard crossover exhaust X-pipe. This design truly blends the combustion pulses from both sides of the engine for improved performance, while further tuning sound via Borla's breakthrough Polyphonic Technology. The result is an aggressive custom sound and improved power. Order the pipes recommended for your vehicle. Additional notes: * Built from premium T-304 stainless steel, superior to T-400 Series (such as 409), to give you the absolute best in performance and durability. * Ultra-smooth mandrel bends ensure maximum flow and power; and precision computer numerical control (CNC) manufacturing ensures an accurate fit * Installation requires cutting the driver's side OE tailpipe assembly. OE tailpipes are resonance-free pipes and are reused with the Borla 60717. Use OE tips or optional Borla tips to complete the system.
( 4 )
$2,664.99
—
$3,264.99
On Sale
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$2,692.30
$2,267.20
On Sale
Stainless Works Redline Factory Connect exhaust systems with H-pipes deliver improved sound and performance for your new Mustang muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for the improved Coyote engine from Ford. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with H-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline H-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * H-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,576.40
—
$2,868.05
$2,169.60
—
$2,415.20
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 45 )
$2,499.95
MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.
( 4 )
$2,069.99
—
$3,149.99
AWE Tuning Touring Edition exhaust systems deliver a bolt-on design with AWE's proprietary straight-through drone-canceling solution--180 Technology that cancels out problematic frequencies, leaving only unlocked performance and AWE's signature note. These sophisticated, more civilized exhausts are handcrafted and CNC mandrel-bent from T304L stainless steel, finished with tips in chrome silver or diamond black, and offer premium performance for a variety of vehicles—domestic and import. Order the preferred exhaust designed for your vehicle.
( 5 )
$2,270.00
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$2,098.95
—
$4,326.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
