Availability
Showing In Stock Items. Show All 26 Items.
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 321 )
$188.95
—
$449.95
$170.05
—
$403.95
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$102.95
—
$199.95
$92.65
—
$179.95
On Sale
Flowmaster's aluminized steel turndowns have more than just great looks. They're designed to mount directly to Flowmaster's Scavenger race mufflers and are highly recommended for even greater sound reduction.
( 14 )
$81.55
—
$88.85
$73.40
—
$79.97
On Sale
MBRP XP Series muffler bypass pipes are built with rugged 16-gauge T409 stainless steel, so you can count on them to withstand anything and everything from salt and tar to rocks. Available for universal and vehicle-specific applications, the pipes are easy to install. MBRP XP Series muffler bypass pipes are rugged, unrestricting, and are ready to enhance your vehicle's horsepower and sound with long-lasting performance.
( 15 )
$124.99
—
$309.99
$99.99
—
$259.99
On Sale
Flowmaster S-bend combo packs were developed to simplify the routing and fabrication of exhaust pipes for those tricky jobs. The S-bends are mandrel-bent pipes with a deep slip fit on one end. The combo includes 4,6, and 8 in. offsets for those jobs that require more than one offset. The mandrel bends are made to provide an easy, high flow that is not restrictive like kinked designs.
( 19 )
$249.95
$224.95
On Sale
Blackheart intermediate pipes are strong, lightweight stainless steel, and mandrel-bent where applicable. They're available in a variety of sizes and configurations with quality welds to ensure strength, longevity, and good looks. These pipes help provide vehicles with maximum exhaust velocity, ground clearance, style, and high performance! Order the Hooker Blackheart intermediate pipes tailored for fitment on your vehicle.
( 15 )
$199.95
—
$376.95
$116.95
—
$339.25
On Sale
Flowmaster straight exhaust tubing assists you in fabricating a custom exhaust system. Made from T-409 stainless steel, these 16-gauge pipes are ideal for professional shops or the do-it-yourselfer. The tubing is available in 4 ft. sections and a variety of diameters to fit your application needs.
( 9 )
$82.79
$74.51
On Sale
Heavy-duty downpipes for your heavy-duty truck! Flowmaster Chevy/GMC 6.5L truck turbo diesel downpipe kits feature thick-walled aluminized pipes, clamps/hangers, brackets, instructions, decals, and a warranty card all in one box.
( 14 )
$249.95
$224.95
On Sale
Flowmaster ball flange reducer kits are designed to replace those old 3-bolt flanges. They have a unique ball flange-style that requires no gasket, giving you a leak-free connection.
( 17 )
$194.95
—
$249.95
$175.45
—
$224.95
On Sale
Flowmaster ball flange kits are designed to replace those old 3-bolt flanges. They have a unique ball flange style that requires no gasket, giving you a leak-free connection.
( 9 )
$199.95
$179.95
On Sale
Hooker 16 and 18-gauge 180 degree Mandrel bend tubes bends are available in many combinations of radii, diameters, and lengths. All Hooker bends are made on the industry's most up-to-date mandrel bending machines to ensure smooth, wrinkle-free bends with no crimping.
( 101 )
$21.73
—
$62.05
$11.95
—
$55.85
On Sale
APR offers premium braided interlocking flex pipes in a variety of lengths and inlet/outlet diameters. Internally the flex section is fully sealed with a corrugated interlocking lining that improves flow and reliability. Externally, the flex section features a low-profile design with minimal braiding material. This eliminates common issues with other designs that can collapse, billow, rub, rattle, and fray over time. Crafted from T304 stainless steel, these flex sections are designed to stand the test of time.
Not Yet Reviewed
$64.95
$58.46
On Sale
Flowmaster introduces their Outlaw high clearance axle-back exhaust systems for select Ford Broncos with a 2.3 or 2.7L engine. These systems replace the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 15 hp and 16 lbs.-ft. were measured at the rear wheels. Their 2.50 in. mandrel-bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Each system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off-roading. A polished 3 in. stainless steel tip is used to add a custom look to the iconic Bronco vehicles. All necessary hardware is included and factory mounting locations are used for an easy installation.
Not Yet Reviewed
$219.95
$197.95
On Sale
APR's premium line of exhaust reducers is perfect for the do-it-yourself enthusiast transitioning their system from one size to another. Offering an easy solution, these simple components are made from a single swedged T304 stainless steel pipe and available with different inlet/outlet sizes. Order the exhaust reducer suited to your application.
Not Yet Reviewed
$29.95
—
$54.95
$16.47
—
$49.46
On Sale
Flowmaster replacement tailpipes offer pre-bent pipes designed to fit to your existing Flowmaster exhaust kits. The replacement tailpipes are made from 16 gauge 409S stainless steel mandrel bent tubing and are designed to fit your vehicle perfectly with all the quality and performance of genuine Flowmaster replacement tailpipes!
( 4 )
$549.95
$493.95
On Sale
These aluminized, large-diameter Flowtech Pro-Stang starter tubes are designed for use with your Pro-Stang H-pipes. These tubes go between the H-pipe and the muffler.
( 18 )
$92.15
$50.68
On Sale
Flowmaster turbo diesel downpipe kits have a larger-than-stock diameter to increase airflow by up to 25 percent. Get more torque and horsepower from these easy to install upgraded downpipes from Flowmaster..
Not Yet Reviewed
$189.95
$170.95
On Sale
Cast from T304 stainless steel, APR T-splitters allow for easy connection to a 76mm (3 in.) pipe—and split at 90 degrees to a dual 63.5mm (2.5 in.) pipe. Your exhaust pipes simply butt up to the CNC-machined section of the casting for a clean transition and clamping point with a slip clamp at each end. This results in a high-flow design with a smooth internal surface and internal transition. Each part comes electropolished with a bright and clean finish; and an indented APR logo on one side lets you display the part with pride. Notes (for P/N EXH0433): * CNC-machined connection points * 76mm (3 in.) to dual 63.5mm (2.5 in.) design * 90 degrees transition * 76mm (3 in.) clamp mounting point * 63.5mm (2.5 in.) welding mounting points * Smooth internal transition for uninterrupted airflow
Not Yet Reviewed
$229.95
$206.95
On Sale
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$649.95
$583.95
On Sale
These intermediate pipe kits from Flowmaster include a combination of S-bend pipes in pairs of different sized outlets. They allow the skilled do-it-yourselfer to fabricate the intermediate pipes of a dual exhaust system.
( 40 )
$299.95
—
$376.95
$269.95
—
$339.25
On Sale
Cast from T304 stainless steel, APR Y-splitters allow for easy connection to an exhaust pipe—and splits at 150 degrees to dual pipes of a different diameter. Your exhaust pipes simply butt up to the CNC-machined section of the casting for a clean transition and easy clamping point with a slip clamp. On the other ends, they provide a flat and clean welding point for dual pipes. This results in an uninterrupted high-flow design with a smooth internal surface and internal transition. Each part comes electropolished for a bright and clean finish; and an indented APR logo on one side lets you display the part with pride. Order the Y-splitter sizes needed for your application.
Not Yet Reviewed
$74.95
—
$199.95
$41.22
—
$109.95
On Sale
The APR turbo outlet hoses replace the factory rubber hose and worm-gear clamps with a high-quality multi-ply silicone hose and strong Clampco T-bolt clamps. The interior of the hose is smooth and lined with a Fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hose allows for a smooth connection from hose to pipe for uninterrupted airflow. APR pays close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore, the hose material adheres to its mating surface under high-temperature to help create a stronger leak and slip-free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Features: * Direct replacement parts * Hoses are compatible with both OEM and upgraded APR charge pipes * Increases performance through smooth airflow paths and reduced boost leak points * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly
Not Yet Reviewed
$54.95
—
$209.95
$41.21
—
$188.95
On Sale
Dinan resonator delete pipes upgrade the sound and enjoyment of your car with a kit that removes the resonated section of the factory exhaust for a more aggressive tone. These Dinan delete kits allow for an aggressive tone to be achieved out of your stock system. Coupled with the associated Dinan exhaust the sound is further perfected into an aggressive growl that is hard to ignore. This piece removes the factory resonated section and replaces it with straight-through 3.25 in. T304 stainless steel tubing for better flow and sound.
Not Yet Reviewed
$329.95
$296.95
On Sale
Cast from T304 stainless steel, the APR double-Y splitters allow for easy connection to a 76mm (3 in.) pipe and splits to a quad 63.5mm (2.5 in.) pipe. Your exhaust pipes simply butt up to the CNC-machined section of the casting for a clean transition and easy clamping point with a slip clamp. On the other ends, it provides a flat and clean welding point for dual 63.5mm (2.5 in.) pipes (16 gauge / 1.6mm or thinner). This results in a high-flow design with a smooth internal surface and internal transition. Each part comes electropolished for a bright and clean finish; and an indented APR logo on one side lets you display the part with pride. Notes (P/N EXH0146): * CNC-machined connection points * 150 degrees transition * 76mm (3 in.) clamp mounting point * 63.5mm (2.5 in.) welding mounting points * Smooth internal transition for uninterrupted airflow
Not Yet Reviewed
$299.95
$164.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
