Filters
Summit Racing™ vacuum activated switches are conveniently offered as an optional choice for our manual 700R4 hydraulic lockup kit, or as a replacement for the automatic version. The adjustable vacuum switch will hold the clutch on during steady state cruising and disengage when accelerating or downshifting. The switches are factory preset at 13 in. Hg.
( 1 )
$69.99
Go Fast Bits offers DV Plus Range with Direct-Fit Performance Diverters for a wide range of domestic and import vehicles. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great—the ECU opens it faster than any pneumatic valve, so why replace it? The weak point, however, is the valve mechanism itself. GFB's DV+ solves this problem by replacing the valve parts with an anodized billet aluminum housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, or include a solenoid valve with the diverter. These approaches add unnecessary cost and additional parts (in some cases requiring long vacuum hose runs, mounting brackets, etc.). All these additional items result in a product that is slower, less responsive, more expensive, and takes longer to install. GFB's DV+ solution, on the other hand, is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds, either. Order the model recommended for your vehicle.
Not Yet Reviewed
$147.60
—
$166.50
ACDelco secondary air injection pumps provide a perfect fit for your worn OE part. The air pump is an important part of emissions control for your vehicle, as it acts as the support system for your catalytic converter. These durable replacement pumps are available in a variety of styles for vehicles from the 1990s and up. They're easy to install and will restore the performance you need. Order the model recommended for your application.
( 1 )
$86.99
—
$385.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$147.60
—
$242.10
Go Fast Bits' DVX takes the extremely popular DV+ diverter valve and adds dual venting outlets, along with GFB's patented venting bias adjustment system. So, not only do you get improved boost holding and throttle response, you have total control over your blow-off sound volume! The DVX is not just a noise maker (like BOV spacers); by modifying the valve operation method, it offers the same performance benefits that the DV+ does. It retains ECU control for the fastest possible operation. No other blow-off valve has the advantage of GFB's venting bias adjustment, allowing you to alter the blow-off sound simply by moving the adjustment lever. GFB's DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to "pilot actuation" to ensure better performance on stock or modified engines. Furthermore, these benefits won't cost you a fortune! Rather than throwing the entire factory diverter valve system in the trash (like other manufacturer's "solutions"), the DV+ keeps what works and replaces what doesn't. Order the model recommended for your vehicle.
( 1 )
$247.50
—
$328.50
Clear your codes with ACDelco A.I.R. check valves. These direct-fit replacements will restore performance, prevent exhaust gases from flowing back through your air injection system, and turn your "check engine" light off. ACDelco A.I.R. check valves are designed to OE specs to deliver the best fit and function with reliable service.
( 6 )
$122.99
—
$372.99
Don't take chances with old, questionable, or faulty catalytic converter check valves that can cripple your vehicle's emissions system. Standard Motor Products replacement converter check valves are designed to exceed OEM specifications for dependable, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor Performance.
Not Yet Reviewed
$21.99
—
$34.99
ACDelco Gold secondary air injection pump check valves are high-quality aftermarket replacement components for your emission system. These premium steel check valves are manufactured to meet or exceed your expectations for fit and performance. They're available for countless vehicle applications from the 1960s and up
Not Yet Reviewed
$18.99
These Standard Motor AIR pump check valves are one-way airflow control valves in the air supply tubes to the exhaust system. They are designed to prevent exhaust gas backflow into the air pump system. The valves can also be used in the air tube to the 3-way catalytic converter.
( 8 )
$13.99
—
$353.99
These Walker universal catalytic converter AIR tubes allow you to install them on any type or style of catalytic converter. They are manufactured from high-quality materials and feature a universal fit. With a small amount of welding, Walker universal catalytic converter AIR tubes are the perfect choice to customize your own exhaust system.
( 4 )
$51.99
Standard Motor Products offers manifold air tubes in nearly a hundred configurations for vehicle from the 1960s and up. These replacements are manufactured to OE standards to easily swap out your broken or rusted original air tubes. Order the model recommended for your vehicle and engine application.
( 19 )
$24.99
—
$152.99
Crown Automotive exhaust check valves prevent exhaust from forcing its way back through the air injection system, which would damage the pump and other components. If your original parts are bad, they will be unable to sense the increase in the intake manifold vacuum and may cause damage to the cylinder head, pistons, and cylinder bores.
Not Yet Reviewed
$26.99
Get economical replacement parts with guaranteed performance—Cardone remanufactured smog air pumps! Cardone disassembles, cleans, and replaces worn components and tests their smog pumps so you receive like-new quality at a much lower price. Bearings are 100 percent new and tested for proper installation. New carbon shoes and vanes are installed, and high-temperature grease is used to extend bearing life and the life of the pump. Recycling used parts keeps them from ending up in a landfill! Cardone remanufactured smog air pumps are good for you and good for the environment. Order the model designed for fitment with your vehicle application.
( 1 )
$82.99
—
$463.99
Standard Motor offers AIR pump tubes in a variety of configurations for vehicles from the 1970s, '80s, and '90s. These steel replacements are available for all positions in your AIR pump system. The tubes are built to factory specifications so they can be installed easily with no modifications.
Not Yet Reviewed
$29.99
—
$166.99
Failed the emissions inspection? Standard Motor replacement air pumps are the ones to trust when OE falters. Controlling vehicle emissions is important for your car and our environment. SMP replacement pumps are quality-built components that will restore the effectiveness of your vehicle's emission control system with reliable performance. No engine runs at 100 percent efficiency. So, whether you call it an air injection pump, smog pump, or pollution pump, your vehicle needs it to burn those wasted hydrocarbons—and meet emission regulations. Choose Standard Motor air pumps to resolve your emissions issues.
Not Yet Reviewed
$153.99
—
$369.99
Go Fast Bits offers Mach 2 TMS Recirculating Diverter Valves for a variety of vehicles. It's the simple and essential modification for 30 percent quicker boost—utilizing proven TMS (Turbo Management System) technology to ensure dependable boost holding and optimum throttle response. If you don't need the patented venting bias adjustment feature of the Respons or Deceptor Pro, the Mach 2 is your answer. It's configured as a 100 percent recirculating valve (i.e. bypass, plumb back), and add-on kits are also available to convert to 100 percent atmosphere venting. Use the recirc model for direct factory replacement when you want the performance without the noise—or add the conversion kit when you want some noise with your performance! Factory bypass valves have two main shortcomings: they're typically designed to start opening above a certain pressure to protect the engine, and they're not optimized for throttle response. And you can't vent them to atmosphere without stalling your engine. The Mach 2 solves all of these issues. It can effectively hold unlimited boost (unlimited in that no turbo could ever produce enough pressure to damage it), and the TMS technology ensures maximum throttle response. And you CAN vent with the atmo conversion to atmosphere without stalling your engine. Product notes: * Recirculation model for direct factory replacement for performance without the noise * Atmosphere venting kits to convert the recirculating valve if you want noise with your performance * Like the Respons and Deceptor Pro II, the Mach 2 is available in a range of bolt-on kits for most popular turbo models * No additional adaptors, parts or vehicle modifications are required—simply remove the factory bypass valve and replace it with the Mach 2; it's that simple!
( 2 )
$172.80
—
$369.00
These Dorman electric AIR pumps are designed to replace your OEM AIR pump. They feature a unique design and install in your emission system without any modifications. Built with your specific application in mind, Dorman electric AIR pumps maintain efficient emission operation.
( 2 )
$154.99
—
$263.95
Air injection systems include certain safety checks which prevent exhaust from forcing its way back toward the pump, or from overloading the manifold. Standard Motor A.I.R. diverter valves are one such component. These replacements are manufactured from durable materials, built to factory specs, and will easily install in the stock location. If your bypass, diverter, or check valve is damaged or missing, find the Standard Motor part to fit your specific make and model.
( 1 )
$47.99
—
$534.99
These Dorman A.I.R check valves are direct replacements for your OE A.I.R check valve. Dorman has been an industry leader in producing quality replacement parts and continues to strive for excellence. When you're trying to get your vehicle back on the road, look no further than Dorman.
( 4 )
$73.96
—
$331.95
The multiple award-winning Kompact EM Plum Back diverter valves featured by Turbosmart are the world's first truly plug-and-play upgrade solution for your factory diverter valve! Simply unplug and unbolt your OEM valve and install the Kompact EM Plum Back diverter valve in its place. No adaptors, hoses or extra assembly are required. Turbosmart Kompact EM Plum Back diverter valves take the motorsport proven billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug-and-play valve with full OE integration and control—so you can count on their unmatched performance and reliability. Turbosmart Kompact EM diverter valves have been designed and engineered to overcome the common faults that are generally associated with plastic factory valves through their Boost-Balance Valve Design (the more boost you have, the better it seals), along with positive seal O-ring on the piston's face and billet construction. Key features and benefits: * Patented integrated pressure control * True plug-and-play upgrade * Boost-Balance Valve Technology * Billet construction with high-temperature O-rings * Integrated proprietary high-temperature solenoid valve * Fitment available in Plum Back or dual port options
Not Yet Reviewed
$254.95
URO Parts air injection pumps are designed to comply with all applicable air pollution regulations. Like all of their exhaust emissions components, they are carefully engineered to withstand the challenges of today's deteriorating traffic conditions. URO Parts air injection pumps are manufactured using only premium materials and components to survive high underhood temperatures, constant vibration, and high pressures. Built in the same factories as many much more expensive OE parts, URO Parts offers the same or better quality, durability, and reliability.
Not Yet Reviewed
$95.99
—
$216.99
Stay with the parts brand your General Motors vehicle came with and the get the quality you know and trust with ACDelco GM Genuine Parts AIR pump tubes. These replacement parts give you peace of mind knowing that the fit, form, and function meets the high standards and specifications of General Motors.
Not Yet Reviewed
$14.99
—
$191.99
Hedman smog pump kits are designed to fit all makes of headers. To install them, simply drill each primary tube, insert the Hedman air pollution tube, weld, and then connect them with the supplied hose to the factory air pollution control system. These smog pump kits include the necessary parts for installation on one set of headers.
Not Yet Reviewed
$106.99
Motorcraft air pumps are direct-fit and the preferred choice of Ford. These new pumps are made from high-quality materials to maximize performance. They will resist abrasions and corrosion, while ensuring lasting durability. Install Motorcraft air pumps in your Ford and know that the fit and function will be everything you expect them to be.
Not Yet Reviewed
$100.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
