Availability
On Sale
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 34 )
$364.99
—
$679.99
$314.99
—
$614.99
On Sale
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 242 )
$134.99
—
$1,049.99
$109.99
—
$969.99
On Sale
MRBP SLM Series exhaust systems are the starting point to getting the most from cold air intakes, programmers, modules, and downloaders. They're constructed to the same specifications as MRBP's top-of-the-line Pro Series. Built from 16-gauge T409 stainless steel with a muffler delete pipe, SLM units are tuned for an aggressive sound and free-flowing performance. Order the model designed for your diesel application. Features and benefits: * More pulling power * Improved throttle response * Greater fuel efficiency * Mandrel-bent tubing; minimal bend degree angles * Gets hot exhaust out fast * Drops exhaust gas temperature by up to 200 degrees F * Direct-fit to OEM hangers * Bolt-on, no-weld installation * Clamps and installation accessories included * MBRP stamped logo on exhaust tip (if tip is included) * Limited 5-year workmanship warranty. (This series may, with time, develop surface rust which is not covered with this warranty.)
( 13 )
$374.99
—
$834.99
$324.99
—
$774.99
On Sale
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 43 )
$319.99
—
$1,474.99
$274.99
—
$1,334.99
On Sale
Build some power with our Summit Racing™ dual exhaust systems. These dual exhaust systems include Walker Dynomax headers, universal dual pipes that exit in front of the rear tires, and your choice of selected mufflers. Most all systems come with the hangers, collectors, and hardware. Please note that some fabrication may be required. Order the model that you need.
( 4 )
$547.92
—
$555.92
$488.92
—
$496.92
On Sale
Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter
( 25 )
$299.95
—
$335.95
$164.95
—
$218.95
On Sale
When it comes to dependable performance, Hooker Blackheart Super Competition headers are tough to beat. Hooker has a reputation for building some of the best engineered and toughest exhausts available—and these long-tube headers live up to the hype. They're designed for optimized engine compartment fitment and include oxygen bungs for compatibility with EFI systems. These tough headers use 3/8 in. laser-cut flanges to keep from warping, TIG-welding, and flat finishing for a leak-proof seal and to maximize strength. They aren't compatible with stock manual transmission reverse lock-out linkage, aftermarket, custom linkage or cable drive set-up required to maintain mechanism operation. Hooker Blackheart super competition headers will provide the exhaust performance you've come to expect. Choose the size and finish preferred for your vehicle application.
( 8 )
$999.95
$649.95
On Sale
Flowmaster universal catalytic converters are made from high-quality stainless steel and feature a slip-fit design for easy installation. Their universal design allows them to be used with virtually any exhaust system. Whether you're building a custom exhaust or just need a replacement, Flowmaster universal catalytic converters will enhance your vehicle's performance, while producing cleaner emissions. The units are available in a variety of size, position, inlet quantity, and AIR tube options.
( 120 )
$169.95
—
$181.95
$110.95
—
$118.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$899.95
—
$1,099.95
$494.95
—
$649.95
On Sale
Flowmaster Signature Series exhaust systems are manufactured from brushed 304 stainless steel for years of trouble-free service and high-end good looks. These premium systems are fitted with Flowmaster's Signature Series mufflers for maximum performance and sound, along with black chrome tips (not on all systems), delivering exhausts that look as good as they sound. They are hand TIG welded for exceptional strength and can be easily installed utilizing factory mounting points. Select the system designed for your vehicle.
( 1 )
$945.95
—
$1,410.95
$709.95
—
$1,058.95
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 158 )
$533.95
—
$1,099.95
$329.95
—
$714.95
On Sale
MBRP Pro Series exhaust systems are built for performance auto enthusiasts looking for a great quality exhaust. They're constructed from T304 stainless steel for optimal durability and reliability. Pro Series systems deliver a rich, mellow exhaust note and over 70 percent increased exhaust flow. They include the necessary pipe and muffler, and utilize OEM hangers for complete bolt-on cat-back (or downpipe-back) exhausts. These kits are available with polished stainless steel exhaust tips or carbon fiber exhaust tips for a beautifully finished look. These units are available in a variety of configurations for gas truck/SUV, diesel, and muscle car applications—so you can choose which design is best for your vehicle. MBRP offers a no-hassle lifetime warranty on Pro Series exhaust systems.
( 50 )
$374.99
—
$1,284.99
$324.99
—
$1,184.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 989 )
$237.95
—
$749.95
$137.95
—
$487.95
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$449.95
$337.95
On Sale
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 403 )
$199.99
—
$784.99
$159.99
—
$724.99
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$414.95
—
$687.95
$228.95
—
$378.95
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$394.95
—
$1,349.95
$247.95
—
$877.95
On Sale
Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.
( 50 )
$47.95
—
$58.79
$31.17
—
$38.21
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 220 )
$749.95
—
$1,599.95
$412.95
—
$1,039.95
On Sale
MBRP XP Series muffler bypass pipes are built with rugged 16-gauge T409 stainless steel, so you can count on them to withstand anything and everything from salt and tar to rocks. Available for universal and vehicle-specific applications, the pipes are easy to install. MBRP XP Series muffler bypass pipes are rugged, unrestricting, and are ready to enhance your vehicle's horsepower and sound with long-lasting performance.
( 15 )
$124.99
—
$309.99
$99.99
—
$259.99
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 544 )
$649.95
—
$1,199.95
$384.95
—
$1,003.49
On Sale
MBRP exhaust systems offer material options to best fit your environmental conditions and budget. MBRP Armor Plus Series exhaust systems feature corrosion-resistant T409 stainless steel construction and reliability backed for a lifetime. A performance exhaust system with a Lifetime Warranty, if you don't find yourself faced with lots of precipitation and salt, then the Armor Plus Series is all you're ever going to need. All the tubing is mandrel bent for maximum exhaust flow, ensuring no rippling in the bends, and resulting in more fresh air inside your engine's cylinders to produce more power and improve vehicle performance and longevity. MBRP Armor Plus Series systems are available in cat-back, resonator-back, DPF-back, and axle-back configurations in 2.5 to 5 in. tubing sizes depending on your vehicle. Many systems offer you the choice of rear, side, or turndown exits as well with an assortment of tips for the ultimate in style and vehicle customization. Please note: Winter conditions, heavy salt air, and road treatments might accelerate the corrosion process on T409 stainless steel. This is important to consider before making your purchase, as these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely.
( 1 )
$464.99
—
$749.99
$404.99
—
$689.99
On Sale
Flowmaster Super 50 series muffler is a larger version of Flowmaster's famous 50 series mufflers, and designed for trucks and SUV's, it is also well suited to muscle car and high-performance applications. They are constructed of 16-gauge aluminized steel and fully MIG welded for maximum durability and feature a special tuning chamber that reduces interior resonance, while their larger case improves sound control and optimizes exhaust flow.
( 65 )
$199.95
$129.95
On Sale
Made of 100 percent heavy-gauge aluminized steel, the Armor Lite Series exhaust systems from MBRP are designed to provide cost-conscious consumers with the same high-quality design and craftsmanship as the company's other systems—but at a value price. Armor Lite is suitable for areas with moderate environmental conditions. The high-flow performance systems maximize exhaust flow so your engine keeps its cool with lower exhaust temperatures. The result is greater fuel efficiency, more torque and horsepower, increased throttle response, and a sound that is pure MBRP. These bolt-on systems include stainless steel tips and welded on hangers. Order the model designed to fit your application.
( 13 )
$284.99
—
$1,134.99
$229.99
—
$1,054.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
