Availability
Showing In Stock Items. Show All 25 Items.
On Sale
Control your vehicle emissions with Flowmaster direct-fit catalytic converters. With designs available for hundreds of vehicles from the 1980s and up, these cats meet or exceed USEPA 49-state requirements. They feature stainless steel construction with compression-bent tubing and are ready to bolt-on. Select the replacement model and options recommended for your application.
( 106 )
$499.95
$448.95
On Sale
Flowtech catalytic converter Y-pipes are ideal for connecting Flowtech headers to the stock catalytic converter equipped exhaust system of your late model vehicle. These high-flow Y-pipes are made from thick steel tubing and are individually designed for specific applications, which cover a diverse group of vehicles.
( 43 )
$277.95
$250.15
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 37 )
$343.79
—
$575.79
$303.79
—
$535.79
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$543.79
—
$575.79
$503.79
—
$535.79
On Sale
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$549.95
$493.95
On Sale
Pypes Phantom Series diesel stack pipe plumbing kits give your truck a sleek new look in black. Featuring stainless steel construction powdercoated black for a longer lasting product and a stealthier appearance, Phantom Series stacks for diesel trucks are offered in a single or dual stack version, exiting right behind the cab. Finish them with one of Pypes' diesel stack tips (sold separately) to complete your exhaust. The dual exhaust is a Y-pipe design that converts a single exhaust to two vertical stacks. Choose the preferred style for your rig.
Not Yet Reviewed
$324.79
$299.79
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 29 )
$636.79
$596.79
On Sale
Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.
( 41 )
$649.95
$422.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$449.95
—
$774.95
$384.95
—
$520.95
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Flowmaster pipe kits are just like the Flowmaster exhaust systems except they don't include mufflers. This allows more flexibility in choosing the right sound for your vehicle while still providing the convenience of a pre-bent exhaust system.
( 20 )
$549.95
—
$585.95
$493.95
—
$526.95
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$299.95
—
$449.95
$269.95
—
$403.95
On Sale
Flowtech axle-back exhaust systems are designed with performance in mind. Like all Flowtech exhaust products, they are the perfect combination of quality and value. Order the model designed for fitment on your vehicle. Features include: * Quality welds for strength, longevity, and good looks * Kits are constructed of large diameter, lightweight, 18-gauge, 304 or 409 stainless steel to maximize strength and durability * High-flow, straight-through, polished mufflers produce an aggressive exhaust note under acceleration with a mellow tone at idle * Dual-wall, 4 in., polished 304 stainless steel tips add style to your ride * Factory mounting points are utilized for ease of installation * Tube geometry optimized for maximum ground clearance and hassle-free installation
( 5 )
$599.95
—
$699.95
$329.95
—
$384.95
On Sale
Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 129 )
$319.95
$287.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 992 )
$332.95
$299.65
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 304 )
$599.95
$538.95
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 163 )
$549.95
—
$599.95
$329.95
—
$493.95
On Sale
Flowmaster replacement tailpipes offer pre-bent pipes designed to fit to your existing Flowmaster exhaust kits. The replacement tailpipes are made from 16 gauge 409S stainless steel mandrel bent tubing and are designed to fit your vehicle perfectly with all the quality and performance of genuine Flowmaster replacement tailpipes!
( 4 )
$549.95
$493.95
On Sale
These intermediate pipe kits from Flowmaster include a combination of S-bend pipes in pairs of different sized outlets. They allow the skilled do-it-yourselfer to fabricate the intermediate pipes of a dual exhaust system.
Not Yet Reviewed
$549.95
$493.95
On Sale
Flowmaster manifold downpipes are designed for the person who wants to use a crossmember-back exhaust system while using the factory exhaust manifolds. Utilizing mandrel bent 409S stainless steel tubing and high quality flange gaskets. Flowmaster's manifold downpipes are designed for the perfect leak free fit. Features: * Mandrel-bent 16 gauge stainless steel tubing * Designed to be used without heat riser * Adapt exhaust to factory manifolds * Large 2.50-inch manifold downpipes
( 41 )
$376.95
$339.25
On Sale
Pypes No-Muffler exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage; while allowing you to choose your mufflers. Fabricated using the highest quality materials, Pypes' smooth, seam-coated, mandrel-bent, stainless steel pipes ensure maximum exhaust gas flow, which can significantly boost horsepower. The seam-coating treatment of Pypes No-Muffler exhaust systems enables them to resist corrosion and extends the life of the systems.
( 66 )
$523.79
$483.79
On Sale
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 75 )
$799.95
$519.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 946 )
$385.95
$347.35
On Sale
XForce dump pipes allow for easier release of the high pressure built inside the turbo, thus preventing clogging, and allowing the engine to breathe more freely. In turn, you get more horsepower, throttle, and better fuel economy. Manufactured using a specific, clever design, these dump pipes are made of high-quality 304 stainless steel and a mandrel bend construction, whereas stock exhaust pipes are manufactured using mild steel. Ensure the free flow of exhaust gases through your exhaust system for your vehicle's efficient performance with XForce dump pipes! Order the model for your application.
( 6 )
$400.50
$280.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
