Availability
On Sale
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 27 )
$301.95
$226.45
On Sale
Black exhaust wrap by Heatshield Products insulates your headers and exhaust pipes to retain heat. This action decreases the density of exhaust gases, allowing them to exit your exhaust system sooner (exhaust scavenging), helping to lower intake temperatures and increase horsepower! This stuff reduces radiant heat damage and can lower underhood temperatures by as much as 50 percent with a proprietary black coating that holds its color longer than similar graphite coated wraps. You can fasten Heatshield Products black exhaust wrap with thermal ties, hose clamps, or wire.
( 7 )
$146.99
—
$262.99
$132.29
—
$236.69
On Sale
Flowmaster universal catalytic converters are made from high-quality stainless steel and feature a slip-fit design for easy installation. Their universal design allows them to be used with virtually any exhaust system. Whether you're building a custom exhaust or just need a replacement, Flowmaster universal catalytic converters will enhance your vehicle's performance, while producing cleaner emissions. The units are available in a variety of size, position, inlet quantity, and AIR tube options.
( 126 )
$181.95
$136.45
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 182 )
$154.95
—
$165.95
$100.75
—
$124.45
On Sale
Heatshield Products Inferno header wraps handle the heat from your glowing pipes! Inferno wrap covers your racing snowmobile, motorcycle, cart, or other extreme riding applications with texturized amorphous silica filament yarn. This makes this header wrap strong and flexible while operating at its designed service temperature of 2000 degrees F continuous and 3000 degrees F intermittent. Heatshield Inferno header wraps allows the exhaust gas to exit your system faster, increases exhaust scavenging, and helps to lower intake temperatures creating more horsepower. Wraps are available in widths and sizes to meet your needs. Insulate you pipes for power with Heatshield Products Inferno header wraps.
( 11 )
$192.99
$173.69
On Sale
Flowtech Rams Horn exhaust manifolds feature a tightly fit block-hugger design for popular hot rod and street rods. The cast iron construction is styled in the vintage "Rams Horn" design for maximum strength and engine clearance. The manifolds use smooth-transition, 1 5/8 in. diameter primaries for increased exhaust flow, which means improved performance and throttle response. The thick header flange pads ensure a strong, leak-free seal.
( 21 )
$359.95
$269.95
On Sale
MBRP offers Armor Plus Series muffler bypass pipes for a variety of applications, including many late-model Dodge Challengers and Chargers. Machined from durable T409 stainless steel, these smooth mandrel-bent tubes replace middle oval mufflers. Their race profile delivers an aggressive exhaust tone. Equip your muscle car with Armor Plus muffler delete pipes from MBRP. Additional details: * Value-oriented material designed to protect from penetrating rust and corrosion * Easy to clean * Performance exhaust system components * Mandrel-bent for maximum exhaust flow; no rippling in the bends * Provides more fresh air inside your engine's cylinders * Helps to produce more power, improve vehicle performance and longevity
Not Yet Reviewed
$194.99
$154.99
On Sale
Flowtech is proud to offer these universal turbo headers for small block Ford engines. These down and forward headers are available in ceramic coated mild steel, natural 304 stainless steel, and a polished 304 stainless steel. Available with 1 3/4 in. or 1 7/8 in. mandrel-bent primary tubes and 3 in. collectors with merge spears for increased exhaust velocity. Premium gaskets and bolts, along with 3 in. V-band flanges and clamps are included.
( 18 )
$392.95
$255.45
On Sale
Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 129 )
$317.95
$238.45
On Sale
MBRP X-pipes fit your stock manifold with increased power and efficiency. They are made of stainless steel for lasting performance and are polished for lasting looks. MBRP X-pipes are fairly easy to install and are well worth the effort.
( 3 )
$174.99
—
$289.99
$134.99
—
$239.99
On Sale
Taylor Space Age boot protectors are 6 in. long, heat-treated fiberglass covers that withstand temperatures up to 1,200 degrees F. They slide over most plug boots and are available in several colors.
( 48 )
$116.45
—
$132.95
$104.80
—
$119.66
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 980 )
$201.95
—
$415.95
$131.25
—
$269.95
On Sale
Heatshield Products Lava exhaust wraps can give you more horsepower! Made from crushed volcanic rock, Lava wrap maintains hotter exhaust gases, decreases the density, and allows exhaust gas to exit your system faster. This produces better scavenging to lower air intake temperatures and the ability to erupt with increased power! Heatshield Lava exhaust wraps also reduce radiant heat damage, can lower under hood temperatures by as much as 50 percent, and withstands 1,200 degrees F continuous and 2,000 degrees F intermittent. Noncombustible and asbestos free; they're also chemical, acid, water, and fungus resistant with a great carbon fiber look. All rolls are 1/16th in. thick and easy to install. Just wrap it around your headers or exhaust pipes, using overlap to hold it in place (like a hockey stick or tennis racket grip). Then use Heatshield's Thermal-Tie, HP Tie Wire, or hose clamps to secure the ends in place. Bundle your exhaust for more power with Heatshield Lava exhaust wrap.
( 21 )
$117.99
—
$209.99
$106.19
—
$188.99
On Sale
Flowtech Afterburner headers have a patented velocity tube design, which will increase scavenging and smooth exhaust pulses. They also feature a primary collector formed from steel, and a large 3 in. secondary collector. They're available in standard painted or ceramic coated finishes. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 7 )
$409.95
$265.95
On Sale
Protect your ride from exhaust heat with the help of Heatshield Products and their exhaust wraps. They help keep heat inside of your exhaust system, where it can promote better flow and increased scavenging effects. The reduced heat also aids in keeping the driver's compartment cooler and reducing temperatures under the hood, lowering intake air temperatures, and allowing your car to make more power. These wraps feature a fiberglass yarn that is water and fungus-resistant, and they include a vermiculite coating that protects them up to 1,200 degrees of continuous heat and 2,000 degrees intermittent. Protect your ride and everything inside from excessive heat with the available selection of Heatshield Products exhaust wraps best suited for your application.
( 6 )
$180.99
—
$245.99
$162.89
—
$221.39
On Sale
Steeda S550 Mustang GT 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 14 )
$299.95
$239.96
On Sale
Flowtech X-Terminator off-road X-pipes were first offered for manual transmission Mustang owners looking for that X-treme advantage in competition situations. Their unique, mandrel-bent, cross-pipes are formed from 16-gauge aluminized tubing for greater flow and a classic sound. They feature a direct bolt-on design that uses OEM routing and hangers. Due to popular demand from non-Ford enthusiasts, Flowtech added its line of universal X-Terminator X-pipes in 2.5 in. and 3 in. tube diameters. Features include: * Direct bolt-on design for select late model Mustangs (manual transmission models only) * Distinctive sound * Increased exhaust velocity * Adjustable cut-to-fit for use on a variety of applications * Easy installation
( 3 )
$254.95
$191.25
On Sale
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$226.95
$192.91
On Sale
With Professional Products Legato Performance exhaust systems, you get the sound of performance every time you turn the key. Plus, the best "bang for your buck" whether you're driving a muscle car, luxury vehicle, truck, or Jeep. Delivering increased power and an awesome medium/aggressive sound, Legato utilizes high-quality, mandrel-bent, and free-flowing thick wall 409 stainless steel tubing and true chambered muffler construction. Most systems are completed with their embossed signature Legato 304 highly polished or black satin finished stainless steel double wall tips. These features, along with a limited lifetime warranty, means your vehicle will sound terrific and look great for a long time. Legato Performance systems are easy to install using the factory hanger mounts and include adjustable hanger rods for perfect fitment and all the hardware needed to install the system in your driveway. Legato Performance exhaust systems offer the best of everything; high-quality stainless steel exhaust that will not rust through regardless of terrain or elements, an excellent tone, and a few extra bucks in your pocket. Systems without tips permit use of original factory tips, and Legato includes high-quality clamps with instructions to make these systems complete.
( 7 )
$229.99
—
$308.99
$195.49
—
$262.64
On Sale
APR's premium line of Helmholtz resonators are perfect for the do-it-yourself enthusiast fabricating a custom exhaust system. They target and cancel out specific frequencies that create drone. Internally the system is open with a small offshoot path leading to the main chamber; this is designed to bounce soundwaves back into the exhaust flow path to eliminate unwanted frequencies. The main exhaust path is a straight through pipe with offset inlet and outlet. There are no harsh twists, turns, or baffles to slow exhaust flow. You'll get full uninterrupted flow for maximum power. The entire system is fabricated from T304 stainless steel and features strong and attractive TIG-welding throughout. The system is stamped with an APR logo and rolled with two sets of double ridges for additional structural strength and killer looks. To top it off, each system is fully brushed clean to provide an attractive finish. Helmholtz resonators are available in multiple lengths.
Not Yet Reviewed
$329.95
$214.45
On Sale
Do you want the right finish to your exhaust system? Flowmaster stainless exhaust tips are available to accent your exhaust system by offering various angles, edges, and lengths.
( 156 )
$171.95
$111.75
On Sale
Flowmaster stainless steel Delta Force 50 Series muffler Race mufflers provide maximum flow with increased sound control for high-horsepower race applications. Revolutionary Delta Flow technology has allowed Flowmaster to shrink case sizes for improved ground clearance and at the same time reduce exterior sound levels and interior resonance, which are major causes of driver fatigue. They are manufactured from highly durable, fully welded 16 gauge stainless steel. These are the mufflers that can deal with 1,000 or more horsepower - the zone where truth and consequences come together at the light!
( 4 )
$213.95
$139.05
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 268 )
$394.95
$256.75
On Sale
APR's Premium line of sound absorption mufflers are perfect for the do-it-yourself enthusiast fabricating a custom exhaust system. They'll tame your exhaust note and leave a pleasant growl that's sure to turn heads. Internally, the system is filled with sound absorption material wrapped around dual perforated pipe. This is a straight-through muffler design—there are no twists, turns, or baffles to slow exhaust flow. You'll get full uninterrupted flow for maximum power. The whole system is made from T304 stainless steel and features strong and attractive TIG-welding throughout. Premium mufflers are stamped with an APR logo and rolled with two sets of double ridges for additional structural strength and killer looks. To top it off, each system is fully brushed clean to provide an attractive finish. These mufflers are available in different sizes; thicknesses; and inlet/outlet sizes, quantities, and locations.
Not Yet Reviewed
$249.95
—
$414.95
$162.45
—
$268.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
