Availability
Showing In Stock Items. Show All 182 Items.
Stainless Works offers Factory Connect exhaust systems for a wide range of cars, trucks, and Jeeps. They're designed to improve sound and performance. The bolt-on systems connect to the factory manifolds or Stainless Works headers. You can select either a classic muscle car tone of a chambered muffler, or go for the extreme with S-Tube style mufflers. Components are built from corrosion-resistant 304 stainless steel and TIG-welded at the company's state-of-the-art facility in Streetsboro, Ohio. Smooth mandrel pipe bends optimize exhaust flow. Factory Connect systems are available in a variety of styles (cat-back, rear axle-back, etc.), configurations, pipe sizes, tip styles, and more. Order the model with options recommended for your vehicle.
( 2 )
$809.40
—
$1,859.15
Stainless Works Redline Factory Connect exhaust systems with H-pipes deliver improved sound and performance for your new Mustang muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for the improved Coyote engine from Ford. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with H-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline H-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * H-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
—
$2,868.05
Stainless Works Redline factory connect exhaust systems are fabricated to get the most aggressive growl out of your engine, while eliminating any cabin drone. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fiercest growls your vehicle has been holding back with a Stainless Works Redline factory system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the factory connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 2 )
$1,454.45
—
$2,020.65
Stainless Works Legend factory connect exhaust systems are fabricated to create the Stainless Works signature growl, while improving the driver experience. Strategically designed for improved tone with restrained loudness—they still manage to get the blood flowing for anyone close enough to hear and appreciate that classic muscle car sound. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fierce sound your vehicle has been holding back with a Stainless Works Legend factory exhaust system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the factory connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 3 )
$1,479.15
—
$1,859.15
Stainless Works Redline Factory Connect exhaust systems with X-pipes deliver improved sound and performance for your new muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for your ride's V8 engine. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with X-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline X-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * X-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished or matte black tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
( 2 )
$2,124.20
—
$4,044.15
Stainless Works Legend Factory Connect exhaust systems with X-pipes will improve the sound and performance on your ride. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for your car's V8 engine. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their X-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished or matte black quad tips with a double-wall beveled style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$1,859.15
—
$4,044.15
Stainless Works Legend Factory Connect exhaust systems with H-pipes will improve the sound and performance on your Mustang. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for this improved coyote engine from Ford. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their H-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished quad tips with a double-wall conical style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
—
$2,576.40
Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible
( 30 )
$785.84
—
$1,940.85
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 538 )
$1,399.99
—
$2,699.99
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 37 )
$1,075.79
—
$1,086.79
$1,035.79
—
$1,046.79
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 933 )
$699.99
—
$5,334.99
On Sale
XForce Varex exhaust systems deliver the power, sound, and style you desire. Fabricated with the strength and beauty of 304 stainless steel, they're also designed for unrestricted flow and high performance. The systems feature XForce's patented muffler innovation, Varex, that's engineered with sophisticated butterfly valve mechanisms. This allows you to select optimal power output and sound levels to meet your desired preference by directing the flow of exhaust gases. You can choose to purr in street mode, roar in racing mode, or growl somewhere in between. XForce Varex exhaust systems look fabulous and hand the control of power and sound to you. Order the style, size, and configuration recommended for your vehicle.
( 51 )
$1,615.50
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$2,099.95
$898.95
—
$2,499.95
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 246 )
$461.99
—
$2,599.99
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$609.79
—
$1,400.79
$569.79
—
$1,360.79
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 157 )
$795.99
—
$2,794.99
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$460.79
—
$1,392.79
$420.79
—
$1,352.79
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$528.79
—
$1,412.79
$488.79
—
$1,372.79
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 282 )
$559.99
—
$2,699.99
Unlock your Jeep's performance potential with one of these Crown Automotive exhaust kits. They contain direct replacement parts built to OE specifications and fit just like the factory exhaust. These mufflers and other components are made from high-strength materials, with each part designed to ensure excellent durability. The proper exhaust system can enhance a vehicle's horsepower. Choose the style that best suits your specific application, such as muffler-back, cat-back, or manifold-back. You'll get the most out of out of your driving experience with Crown parts.
( 27 )
$186.99
—
$504.99
On Sale
Flowtech Super Street Dual exhaust kits offer a top-quality, custom-fit dual exhaust system at a price that couldn't be more affordable. They feature fixture-formed, 2.25 in., 16-gauge tubing for increased performance, and a custom fit for both factory manifolds and aftermarket headers. These kits include everything from the header flange back to the tailpipe, excluding mufflers.
( 79 )
$258.95
$233.05
—
$314.95
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$816.99
—
$1,736.99
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$826.99
—
$1,552.99
Roush F-150 exhaust kits improve horsepower, torque, and fuel efficiency while giving your truck an aggressive look and sound. Roush exhausts are engineered to allow more air flow, compared to factory exhaust pipes, while decreasing back pressure. This increased flow helps your truck reach its full performance potential. Additionally, these exhaust kits produce a deep throaty sound that lets others know you mean business. Roush F-150 exhaust kits feature: * Compatible with Roush cold air kits and ECU flashes * Constructed entirely from stainless steel to enhance durability * Mandrel-bent to ensure consistent flow … others tend to use crimp-bends that cause restrictions and inconsistent flow * 304 stainless steel tips, chrome-flashed for superior corrosion resistance, and embossed with the Roush logo * Amazing Roush sound is sporty and assertive * Available for most cab and bed configurations * Offered in side-exit and rear-exit versions (not all applications) * Installation is quick and easy, utilizing factory hanger locations * Most applications need no vehicle modifications (a few require alteration of the factory flange) * Includes all necessary hardware Note: Roush Performance recommends checking your local noise ordinance levels prior to purchase.
( 60 )
$1,099.99
—
$1,299.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
