Availability
Sanderson Headers QP Series exhaust manifolds, aka "Quiet Performers," are their cast iron header group that overcomes the limitations of tube-style headers in both fit and performance! Sanderson Headers QP1000, 2000, and 1200 exhaust manifold sets are able to produce gains in both low-end torque and high-end horsepower. These manifolds feature individual runners to separate exhaust pulses, cast-in anti-reversion baffling, and a D-port design for improved scavenging. They're also more compact than tubular headers and provide more clearance for your steering setups, accessories, and other chassis and engine components. Plus, some weigh less than your factory headers and all look a whole lot better! Sanderson headers offer the only patented flange leak-free, gasket-free design. For those of you who want to increase the life of your investment and control heat in your engine bay, they offer a multi-layer inside and out silver ceramic coating that is polished to a high luster. Get a tight seal without gaskets and create more torque and power at every rpm range with a set of Sanderson Headers QP Series exhaust manifolds.
( 21 )
$786.80
—
$952.10
BladeRunner exhaust manifolds from aFe are made from 304 stainless steel and feature a one-piece design with reinforced ribs between each exhaust port. This increases strength and eliminates the cracking found in most stock and aftermarket units. These manifolds feature two EGT probe ports, a thick wall design for increased strength, matched ports, and a merged runner design to maximize exhaust flow. Once you've installed a BladeRunner on your ride, you'll be able to feel improved turbo spool-up times, throttle response, and decreased EGTs. For top performance, choose an exhaust manifold from aFe.
( 5 )
$791.70
—
$877.80
On Sale
Summit Racing™ is proud to offer Ecoboost turbo manifolds for the Gen 1 3.5L Ecoboost engines. The factory manifolds are known for warping, cracking, and then leaking when used under heavy loads. Our upgraded stainless manifolds are much heavier than the lightweight factory versions and they flow better which improves exhaust flow and lowers back pressure, allowing the turbos to spool quicker. Since they must be replaced you might as well gain some power and mileage. Check out these features below: * Cast in high-strength and corrosion-resistant CF8 (304) stainless steel * Extra thick flanges have higher resistance to warpage and cracking * Individual runner into collector design with over 60 percent more internal volume * Port matched outlet with integrated gasket anti-extrusion ring provides 37 percent increase in outlet flow area * Additional bolt hole provides three studs for each exhaust port * Direct bolt on with no additional modifications or parts required
Not Yet Reviewed
$899.99
$799.99
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$837.79
—
$846.79
$797.79
—
$806.79
On Sale
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 23 )
$1,019.60
—
$1,106.60
$917.64
—
$995.94
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$1,049.95
$943.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$844.55
—
$1,082.70
$760.10
—
$974.43
Schumacher Creative Services Big Block Tri-Y under chassis headers give you high-flow header performance and a custom fit that means you don't have to sacrifice your power steering. They fit great with most aftermarket aluminum heads with angled plugs, retain exhaust studs in the heads, and they don't capture the starter. Specifically designed for your application, Schumacher Big Block Tri-Y under chassis headers install quickly and painlessly, works with manual or power steering and automatic transmissions, and are available in different finishes. Select the ones you prefer.
Not Yet Reviewed
$939.00
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$837.79
—
$843.79
$797.79
—
$803.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$831.79
—
$844.79
$791.79
—
$804.79
On Sale
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 252 )
$833.90
$750.51
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 28 )
$845.79
—
$853.79
$805.79
—
$813.79
Schumacher Creative Services Small Block Tri-Y under chassis headers give you high-flow header performance with a custom fit that means you don't have to sacrifice your power steering. They retain exhaust studs in the heads, so no more breaking into water jackets. Unlike most headers, they don't capture the starter, have excellent spark plug clearance, and are easily installed from the top down. Schumacher Small Block Tri-Y under chassis headers work with manual or power steering and automatic transmissions, and include gaskets and collectors. Additional notes: * Requires smaller than stock starter * Requires 90-degree oil filter adapter or shorty oil filter * Tri-Y step-up design * 14-gauge steel tubing * 3/8 in. flanges at the head * Mandrel-bent for smooth flow
Not Yet Reviewed
$939.00
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 300 )
$760.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
