Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Exhaust
Showing In Stock Items. Show All 363 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
Flowmaster American Thunder Exhaust Systems
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 555 )
$1,024.95
$767.95
—
$999.95
JBA Performance Exhaust Competition-Ready Headers
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 99 )
$764.30
—
$993.24
MagnaFlow Street Series Performance Exhaust Systems
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 614 )
$754.00
—
$999.00
Doug's Headers
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 723 )
$752.76
—
$993.24
Sanderson Headers
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 293 )
$760.36
—
$904.02
JBA Performance Exhaust Cat4ward Headers
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 486 )
$752.76
—
$989.41
BBK Full-Length Headers
Direct-fit BBK full-length headers will help your vehicle produce extra horsepower. Constructed from heavy 14-gauge, mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 109 )
$769.99
—
$849.99
Doug's Headers Stainless Steel Headers
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 33 )
$791.99
—
$971.30
Pypes H-Bomb Exhaust Systems
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 26 )
$753.79
—
$901.79
MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converters
MagnaFlow OEM Grade Federal/EPA Compliant direct-fit catalytic converters provide your vehicle with high-emission compliance, the latest technology, and premium-grade components. Along with those benefits, you also get their industry-leading warranties, so you can drive with confidence. MagnaFlow converters are designed to the exact original equipment specifications, while being engineered to keep the "Check Engine Light" off. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Meets or exceeds EPA emissions requirements * Hassle-free, OE-like fitment tailored to your specific application * Limited 5-year/50,000 mile warranty on construction * Limited 25,000 mile warranty on emissions
( 14 )
$752.00
—
$959.00
BBK Mustang 351W Swap Headers
Pump some extra cubes and horsepower into your Mustang 351W the easy way with these engine swap headers from BBK. Features include 1 5/8 in. or 1 3/4 in. primaries in full-length and shorty designs. They're constructed from 14-gauge, mandrel-bent tubing with 3/8 in. thick die-stamped flanges and are available in your choice of ceramic coated or chrome plated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 46 )
$799.99
—
$849.99
Sanderson Headers Blockhugger Headers
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 315 )
$754.49
—
$800.03
Summit Racing™ Ecoboost Turbo Manifolds
Summit Racing™ is proud to offer Ecoboost turbo manifolds for the 3.5L Ecoboost engines. The factory manifolds are known for warping, cracking, and then leaking when used under heavy loads. Our upgraded stainless manifolds are much heavier than the lightweight factory versions and they flow better which improves exhaust flow and lowers back pressure, allowing the turbos to spool quicker. Since they must be replaced you might as well gain some power and mileage. Check out these features below: * Cast in high-strength and corrosion-resistant CF8 (304) stainless steel * Extra thick flanges have higher resistance to warpage and cracking * Individual runner into collector design with over 60 percent more internal volume * Port matched outlet with integrated gasket anti-extrusion ring provides 37 percent increase in outlet flow area * Additional bolt hole provides three studs for each exhaust port * Direct bolt on with no additional modifications or parts required
Not Yet Reviewed
$799.99
On Sale
Hooker Competition Headers
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 952 )
$767.95
—
$999.95
Borla Universal Hot Rod Exhaust System Kits
Borla universal hot rod kits contain all of the parts necessary to fabricate a header-back 304 stainless steel performance exhaust system for your custom car or hot rod. The pipes are available in various diameters, and all components are suitable for polishing to a mirror-like shine. Some kits also include Turbo XL mufflers.
( 2 )
$785.99
—
$892.99
Pypes Street-Legal X-Pipes
Free-flowing, mandrel-bent Pypes Street Legal X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. They include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 7 )
$830.79
—
$970.79
Borla ATAK Mid-Section Exhaust Systems
Borla ATAK mid-section (60732) exhaust systems feature 3 in. diameter pipes and the aggressive ATAK sound. They fit with either the OE tailpipes or Borla tailpipes 60640, 60640BC, or 60640CFBA. Borla cat-back and axle-back exhaust systems boast patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. These exhaust systems are built from premium T-304 stainless steel to give you the absolute best in performance and durability. Ultra-smooth mandrel bends facilitate maximum flow and power; and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Order the system recommended for your truck.
( 2 )
$954.99
On Sale
MBRP XP Series Exhaust Systems
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 246 )
$779.99
—
$939.99
Summit Racing™ Pro LS Turbo Manifolds
Summit Racing™ Pro LS turbo manifolds allow you to easily bolt a turbocharger to your LS engine. Built from heavy-duty cast stainless steel with features, such as extra-thick flanges, V-band crossover adapters, and built-in wastegate mounts, our Pro LS turbo manifolds can handle all the heat and horsepower you can throw at them. Features: • Universal turbo manifolds • Single or dual mount designs • T4 flanges • Built in 44 or 45mm wastegate flanges • 304 cast stainless steel • Fits all LS exhaust ports
( 10 )
$999.99
Borla S-Type Cat-Back Exhaust Systems
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 935 )
$757.99
—
$999.99
On Sale
Flowmaster Outlaw Series Exhaust Systems
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 276 )
$799.95
—
$999.95
On Sale
Flowmaster FlowFX Exhaust Systems
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 168 )
$1,024.95
$767.95
—
$999.95
aFe Twisted Steel Headers
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 21 )
$820.00
—
$871.00
Hedman Street Headers
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2492 )
$752.99
—
$919.99
