Availability
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$609.79
—
$878.79
$569.79
—
$838.79
Virtually indestructible, Banks Power TorqueTube exhaust headers maximize exhaust extraction, unleashing gobs of torque. Manufactured from 100 percent heavy-wall stainless steel, they are mandrel-formed to tune the exhaust flow for maximum torque in your truck or motorhome. And unlike restrictive stock setups, Banks TorqueTubes literally pull out the exhaust, slashing backpressure and unleashing greater torque, helping the intake stroke to draw in more air. Squeeze more performance out of your engine; choose a pair of Banks TorqueTube exhaust headers designed for your vehicle. Each set may include additional components. Features: * Maximize exhaust extraction * Flanges welded on both sides, then milled flat * Seamless high-velocity collector * Ultra-thick flanges won't warp/flex * No sealant/gaskets needed Please note: Unless otherwise stated, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 11 )
$569.00
On Sale
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$605.80
—
$886.45
$545.22
—
$797.80
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 87 )
$827.95
$519.95
—
$799.95
Geared towards the off-road enthusiast, the R-Series exhaust systems by Roush Performance will make a great addition to any off-road Bronco build. They create a greater engine presence whether you are driving on the road or on the trails, and include a stainless steel Roush muffler and removeable Roush-branded black exhaust tip. R-Series exhaust features: * High-clearance, high-flow muffler with stainless steel construction * Removable exhaust tip allows for greater departure angle on the trails * Deep aggressive sound * Fits both 2.3L and 2.7L * Easy-to-install; fits into the existing joint location on 2021 Ford Broncos
( 1 )
$649.99
MBRP Black Series exhaust systems maximize exhaust flow and minimize exhaust temperatures—so your truck will use less gas, last longer, and perform better. The systems are built from aluminized steel, with a durable high-heat black powdercoat finish. Fully mandrel-bent tubing, with minimal bend degree angles, allows the exhaust to exit quickly; and the seams are fully sealed to resist rust. Black Series systems are available for gas truck/SUV, diesel, and muscle car applications. Order the model designed for your specific vehicle—and add some style and performance! Additional features and benefits: * Road, track, and dyno-tested * Vehicle-specific muffler design * Bolt-on, no-weld design for hassle-free installation * Direct-fit to the OEM hangers; clamps and accessories included * One-year coating warranty; 3-year workmanship warranty
( 31 )
$509.99
—
$849.99
On Sale
Patriot Roadster/Sprint Car headers are setting standards in style, quality, and performance for "Fad T" and '32 Hi-Boy headers. They offer T-buckets a choice between their classic or high performance Sprint-style headers for small and big block Chevy, as well as small block Ford engines. And if you want, you can match these headers with Patriot turnouts and integral mufflers for a complete exhaust system. Patriot Roadster/Sprint Car headers are available in a choice of finishes, including a show-quality chrome that is applied to headers that have been polished before and after assembly to assure ultimate chrome quality 360 degrees around all pipes. Additional finishes for Patriot Roadster/Sprint Car headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 16 )
$721.45
—
$870.00
$649.30
—
$783.00
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$789.99
—
$857.99
On Sale
When it comes to performance exhaust systems, most people are looking for three things: power, sound, and quality. JBA exhaust systems deliver the best of all three, giving them both great looks and performance. One of the first performance upgrades typically made to a vehicle is the addition of a performance exhaust system. While there is a high demand for performance sound, the capacity for power in the JBA exhaust systems gives JBA the extra edge. Each of these systems is tuned to provide the best possible exhaust tone without being overwhelming from within the vehicle. By replacing the restrictive factory exhaust system with free-flowing, mandrel-bent stainless tubing and quality performance mufflers, JBA has developed the power, sound, and efficiency desired in a vehicle. Each of these kits is finished with a polished, chrome plated, stainless steel tip that resists discoloring, along with high-quality hardware and thorough instructions for a simple bolt-on installation.
( 90 )
$557.55
—
$876.35
$501.80
—
$788.72
Upgrading your exhaust note has never been easier! Rough Country Performance cat-back exhaust systems provide an aggressive, throaty growl and killer looks. These durable exhaust systems are fine tuned to improve airflow and deliver the perfect aftermarket exhaust note that will put a smile on your face every time you hit the gas. Each kit features a set of high-temperature-resistant, dual-wall 304 black stainless tips with RC logo for an improved, aggressive look. Plus, each kit conveniently installs onto the factory hangers and features stainless clamps for easy assembly with no welding required. Choose the kit made for your vehicle. Additional notes: * Aggressive, guttural sound * Vehicle-specific tune for maximum performance * 409 stainless exhaust pipe with mandrel-bent, 16-gauge tubing * 409 stainless muffler with RC logo * 304 stainless clamps for easy installation (no welding) * Exhaust installs in factory hangers
( 2 )
$573.38
—
$699.95
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$541.80
—
$848.40
Yoshimura Street Series AT-2 mufflers remove a lot of weight, while adding lots of style, sound, and performance. From the legendary Tri-Oval profiles to the refined carbon-fiber R-77 models, and even Yoshimura's R-55 angular masterpieces, the Street Series slip-on/bolt-on mufflers deliver that special spirit the world has come to expect from Yoshimura. In addition, each muffler model features Yoshimura's "Works finish" for lasting durability. Slip-on the quality of the Street Series AT-2 mufflers—order the application you need.
Not Yet Reviewed
$629.00
—
$749.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$560.00
—
$740.00
Yoshimura Enduro Series RS-2 exhaust systems feature mufflers engineered to provide increased power and power delivery. With a different pyramidal shape and increased volume, RS-2s are quieter with a larger core—with the added bonus of outstanding performance in value-priced packages. All Enduro Series exhausts are equipped with USFS-approved spark arrestors, forest-friendly noise levels, and are tailpipe emissions-compliant. Order the model recommended for fitment on your bike application. Additional features: * Diamond-shaped sleeve * Large core and increased muffler packing volume means quieter operation * Stainless steel cone end-cap * Stainless steel header and tailpipe * Material and finish options available
Not Yet Reviewed
$539.00
—
$749.00
Give your vehicle a unique sound with an MBRP Touring Profile exhaust system. Enjoy a performance exhaust note without the aggressive volume. Your vehicle should have sounded this good from the factory! * Material Specs: Black-Coated Aluminized Steel. Style comes first with this finish. It's the same material from MBRP's aluminized steel, but the tailpipes are coated in a special high-heat black powdercoat, giving any vehicle a great cosmetic look. These systems come with matching black tips as well. * Sound Profiles: Tour Profile. Cruise the highway or hit the track with an MBRP Street Profile exhaust. It's the perfect mix of aggressive sound when you're into the throttle without being obnoxious on long drives. * Tips Specs: Formed from T304 stainless steel and coated with a specialized high-heat black finish, this tip style features a stealthy single wall of steel, perfect for a stylish look that's made to go the distance. Additional notes: * 4 in. DPF filter-back exhaust * Tour profile * Single side exit * No muffler * For diesel applications * Mandrel-bent tubing * 5 in. O.D. tip included (EC/CC models only) * Mild exhaust note * Improved horsepower and torque * Lower exhaust gas temperatures
Not Yet Reviewed
$564.99
MBRP Performance offers Street Profile exhaust systems in a variety of styles (including cat-back and resonator-back), materials (including stainless steel and aluminized steel), finishes, exits (single/dual), mufflers, and more. Cruise the highway or hit the track—these exhausts are the perfect mix of aggressive sound when you're into the throttle without being obnoxious on long drives. And you can increase flow by up to 72 percent! Order the Street Profile system recommended for your vehicle. Additional notes: * Moderate sound level * Smooth mandrel-bent tubing * Helmholz Technology * Lower EGTs
( 1 )
$564.99
—
$794.99
Banks Power Monster exhaust systems for gas and diesel vehicles use 100 percent stainless steel constant-diameter tubing to dramatically improve flow, slash backpressure, and lower operating temps. Only Banks offers a truly engineered system. While the other guys may offer a replacement, Banks delivers total enhancement. Replacing the restrictive stock muffler with a free-flowing Banks Monster muffler makes a huge difference in airflow, sound, and performance. Exhaust flows straight through, instead of torturously winding its way back and forth inside hairpin chambers and building up backpressure. And only Banks Monster mufflers have an expansion chamber to alleviate the nasty drone that other straight-through mufflers are known for. Banks utilizes durable ceramic packing with a high-temperature rating that won't degrade like fiberglass. For today's trucks equipped with DPFs (diesel particulate filters), there's an additional factor of critical importance: tailpipe exit temperatures. As the DPF cycles, extremely high temperatures are produced and conducted through the exhaust system. Banks' CoolCuff design extinguishes dangerous temperatures better than OE and is just plain cold when stacked up against aftermarket competitors. Additional features of Banks Monster exhaust systems: * Mandrel-bent stainless steel construction * Virtually eliminates backpressure * Lowers exhaust gas temperatures (EGTs) * Sound-tested mufflers for a rich, confident note with no drone * Chrome or high-temperature black over stainless tip options * Offered in single, single with dual tips, and dual configurations * Rear and side exits available * Includes mounting hardware
( 91 )
$529.00
—
$648.00
Corsa cat blankets are custom-engineered to help protect the C8 engine from added heat distributed from the Corsa Performance high-flow catalytic converters found on C8 Corvette models. While the C8 Corvette is an engineering marvel with its mid-engine configuration, eye-catching body lines, and its incredible performance, the engine placement comes with an abundance of heat. One area exposed to excessive exhaust heat is the catalytic converter. These catalytic converter exhaust heat shields have a Basalt lined, Titanium infused weave construction for superior protection and stop heat damage of the painted and carbon fiber parts. Additional features of cat blankets: * High-end Titanium weave construction * Double-reinforced seams with stainless steel thread for long-lasting durability * Custom-fitment, engineered to fit perfectly to Corsa Performance high-flow EPA-compliant catalytic converters * Provides superior heat protection up to 2,500 degrees F * Riveted anchor design with sprung connections allows for easy installation * 2-year manufacturer warranty
Not Yet Reviewed
$678.99
Backed by 40-plus years of knowledge and experience, Thorley headers are designed to outflow your stock exhaust manifolds. These headers increase gas mileage and give your engine more horsepower across the entire rpm range. Their design configuration builds the most power across the rpm range, which is great for everything from street/strip performance, to towing, to steep grades. To make these headers last, Thorley made them out of durable 14-gauge mild steel with 3/8 in. thick flanges and 5/16 in. collector rings or 13 gauge stainless steel with ½ in. thick flanges and topped them off with a good looking, nickel chrome plated finish or a high temperature ceramic coating. To prevent leaks, these headers have an O-ring welded into the flange, in addition to the high-temperature gasket provided. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 20 )
$608.00
—
$795.00
Summit Bucks
Specifically formulated for Californians, Walker CalCat manifold converters comply with regulations for OBD-II and pre-ODB-II vehicles. These exhaust manifolds have an integrated catalytic converter; their OE-style and fit enables an easier install. The CalCats feature a stainless steel body, a heat-shielded pipe, and a structural brace for enhanced strength and durability. In addition, they're built with the right loading of precious metals, the proper catalyst material and design, and a high-technology washcoat—providing enhanced oxygen storage capacity. Gain the best balance of performance and price from Walker CalCat manifold converters.
( 2 )
$501.99
—
$839.99
Yoshimura's Street Series RS-2 exhaust system is a potent and versatile design that evolved from their original TRC, engineered to provide increased power and power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core—and it offers the added bonus of outstanding performance in a value-priced package. All Street Series full exhaust systems are slip-on / bolt-on applications that do not require tampering with the vehicle's emissions control system. RS-2 mufflers are available in carbon fiber or polished aluminum; order the material you prefer and the model designed to fit your motorcycle. Additional details: * Diamond-shaped sleeve * Large core and increased muffler packing volume means quieter operation * Stainless steel cone end-cap * Stainless steel header and tailpipe * Weight: 2.2 lbs. lighter than stock configuration * USFS-approved spark arrester included
Not Yet Reviewed
$589.00
Gibson Dual Extreme exhaust systems are perfect for the drivers who want to take their vehicle to the next level. This dual bolt-on cat-back system exits behind the rear tires at an aggressive angle with a powerful exhaust tone. Add bold street looks with powerful dyno-tested and tuned street performance gains. Order the Dual Extreme exhaust system designed to fit your application. Additional kit features: * Aluminized heavy-duty or stainless steel tubing for extended durability * Mandrel-bent tubing maintains constant exhaust flow through each bend for outstanding performance * Superflow Performance muffler * Polished T304 stainless steel tip with clampless connection design * Zinc plated hangers and clamps * Available in configurations for fitment on different makes and models
( 68 )
$550.99
—
$835.99
Two Brothers S1R Race slip-on mufflers have a sound of pure power in their newly conceived look. It's not just a pretty face; the improved technology increases all-around performance. They feature a stamped, durable spring inlet, aluminum CNC machined outlet, and a lightweight magnesium end cap. Two Brothers S1R Race slip-on mufflers are available in aerospace high-temp carbon fiber, high-temp stainless steel, or polished aluminum. Additional notes and features include: * Rubber-lined styled mount * Spiral-wound perforated core * USFS-approved removable screen-type spark arrestor * Accepts P-Series sound-reduction tips
Not Yet Reviewed
$593.98
—
$791.98
Yoshimura's Signature Series RS-2 exhaust systems tout a potent and versatile design that evolved from their original TRC, engineered to provide increased power and power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core—and it offers the added bonus of outstanding performance in a value-priced package. These full systems are available for a wide range of powersport applications. Options include single or dual exhausts, materials and finishes. Additional product details: * Diamond-shaped sleeve * Large core and increased muffler packing volume means quieter operation * Stainless steel cone end-cap * Stainless steel header and tailpipe * Weight: 2.6 lbs. lighter than stock configuration * USFS-approved spark arrester included * Repack kits, optional inserts, and spark arresters are available for all models (sold separately)
Not Yet Reviewed
$539.00
—
$679.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
