Availability
Showing In Stock Items. Show All 16 Items.
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$609.79
—
$789.79
$569.79
—
$749.79
On Sale
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. Injen Race Series cat-back exhaust systems complement your vehicle's aggressive styling and performance with a straight through, single exit design developed to give you the most exhaust flow out of any cat-back system on the market. The entire length of the system features mandrel-bent, 304 stainless steel 3.00 in. (76mm) pipe with a rear section that tucks into the undercarriage and a single exit, straight-through tip. These features allow turbos to breathe and perform at their peak efficiency, while providing the most ground clearance possible, and the most exhaust flow with a race-inspired, deep exhaust note. Additional features and benefits: * High-quality exhaust band clamps provide the simplest, quickest installation possible * Uses all factory mounting points for simple and convenient placement and compatibility * Oversized tubing reduces restriction providing increased airflow and performance * Increased throttle response and decreased turbo lag * Hand-crafted and TIG-welded to perfection for strength and durability
Not Yet Reviewed
$641.95
$513.56
On Sale
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 23 )
$549.79
—
$788.79
$509.79
—
$748.79
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 37 )
$613.79
—
$707.79
$573.79
—
$667.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$551.79
—
$789.79
$511.79
—
$749.79
On Sale
Flowmaster Outlaw Extreme exhaust systems provide maximum sound level and performance. These race-oriented systems feature 409S stainless steel construction—and their small, lightweight Outlaw mufflers. The mufflers generally produce more power than open headers, while taking "the edge" off the open-header sound, but still producing very aggressive tones, both inside and outside your vehicle. Flowmaster Outlaw Extreme exhaust systems are race-proven and the perfect choice at race tracks requiring mufflers, but without dB restrictions.
( 23 )
$671.95
$603.95
On Sale
XForce Varex exhaust systems deliver the power, sound, and style you desire. Fabricated with the strength and beauty of 304 stainless steel, they're also designed for unrestricted flow and high performance. The systems feature XForce's patented muffler innovation, Varex, that's engineered with sophisticated butterfly valve mechanisms. This allows you to select optimal power output and sound levels to meet your desired preference by directing the flow of exhaust gases. You can choose to purr in street mode, roar in racing mode, or growl somewhere in between. XForce Varex exhaust systems look fabulous and hand the control of power and sound to you. Order the style, size, and configuration recommended for your vehicle.
( 51 )
$1,035.00
$750.00
On Sale
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$649.95
$583.95
On Sale
Hooker RacingHeart Chevy swap long tube headers are race-only components. They include mandrel-bent tubing and thick flanges, plus they're offered in two materials and four different finishes. Order the model preferred for your application. Hooker RacingHeart long tube headers feature: * 2 1/8 in. mandrel-bent primary tubes and long transition 3 1/2 in. collectors with merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Available in natural or polished 304 stainless steel, as well as black painted or ceramic coated mild steel * Gaskets and hardware included * For use with AJE K-member and engine mounts
( 4 )
$759.95
—
$799.95
$682.95
—
$718.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$679.95
—
$799.95
$610.95
—
$718.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 304 )
$676.95
$608.95
On Sale
Hooker Blackheart headers deliver premium performance with a reasonable price. Hooker utilizes stainless steel and mild steel for construction of these headers designed for optimum flow, maximum velocity, and ground clearance. Whether you're looking for shorty headers or long tube, Blackheart headers are available in a variety of styles and sizes to fit a wide selection of vehicles from luxury rides to sports cars, modern muscles, and even trail-blazing rigs. When it's time to tear the heart out of the competition, choose Blackheart from Hooker!
( 51 )
$699.95
$628.95
On Sale
Flowmaster pipe kits are just like the Flowmaster exhaust systems except they don't include mufflers. This allows more flexibility in choosing the right sound for your vehicle while still providing the convenience of a pre-bent exhaust system.
( 20 )
$585.95
$526.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
