Availability
Showing In Stock Items. Show All 86 Items.
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$609.79
—
$878.79
$569.79
—
$838.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$551.79
—
$878.79
$511.79
—
$838.79
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$551.79
—
$877.79
$511.79
—
$837.79
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 282 )
$559.99
—
$868.99
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$543.79
—
$699.79
$503.79
—
$659.79
On Sale
Flowmaster Signature Series exhaust systems are manufactured from brushed 304 stainless steel for years of trouble-free service and high-end good looks. These premium systems are fitted with Flowmaster's Signature Series mufflers for maximum performance and sound, along with black chrome tips (not on all systems), delivering exhausts that look as good as they sound. They are hand TIG welded for exceptional strength and can be easily installed utilizing factory mounting points. Select the system designed for your vehicle.
( 1 )
$979.95
$734.95
aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 12 )
$523.95
—
$819.00
Unlock your Jeep's performance potential with one of these Crown Automotive exhaust kits. They contain direct replacement parts built to OE specifications and fit just like the factory exhaust. These mufflers and other components are made from high-strength materials, with each part designed to ensure excellent durability. The proper exhaust system can enhance a vehicle's horsepower. Choose the style that best suits your specific application, such as muffler-back, cat-back, or manifold-back. You'll get the most out of out of your driving experience with Crown parts.
( 27 )
$504.99
On Sale
Pypes High Tuck header/crossmember-back exhaust systems allow for the most ground clearance of any A-body system on the market. The X-pipe pushes the mufflers up into their installation pockets and the tailpipe sits higher coming out of the muffler. No more bottoming out! Pypes High Tuck header/crossmember-back exhaust systems are designed to boost your car's performance to the next level—you will get more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions. Their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
Not Yet Reviewed
$753.79
—
$806.79
$713.79
—
$766.79
Upgrading your exhaust note has never been easier! Rough Country Performance cat-back exhaust systems provide an aggressive, throaty growl and killer looks. These durable exhaust systems are fine tuned to improve airflow and deliver the perfect aftermarket exhaust note that will put a smile on your face every time you hit the gas. Each kit features a set of high-temperature-resistant, dual-wall 304 black stainless tips with RC logo for an improved, aggressive look. Plus, each kit conveniently installs onto the factory hangers and features stainless clamps for easy assembly with no welding required. Choose the kit made for your vehicle. Additional notes: * Aggressive, guttural sound * Vehicle-specific tune for maximum performance * 409 stainless exhaust pipe with mandrel-bent, 16-gauge tubing * 409 stainless muffler with RC logo * 304 stainless clamps for easy installation (no welding) * Exhaust installs in factory hangers
( 2 )
$649.95
—
$699.95
When it comes to performance exhaust systems, most people are looking for three things: power, sound, and quality. JBA exhaust systems deliver the best of all three, giving them both great looks and performance. One of the first performance upgrades typically made to a vehicle is the addition of a performance exhaust system. While there is a high demand for performance sound, the capacity for power in the JBA exhaust systems gives JBA the extra edge. Each of these systems is tuned to provide the best possible exhaust tone without being overwhelming from within the vehicle. By replacing the restrictive factory exhaust system with free-flowing, mandrel-bent stainless tubing and quality performance mufflers, JBA has developed the power, sound, and efficiency desired in a vehicle. Each of these kits is finished with a polished, chrome plated, stainless steel tip that resists discoloring, along with high-quality hardware and thorough instructions for a simple bolt-on installation.
( 90 )
$510.85
—
$813.25
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 246 )
$554.99
—
$855.99
On Sale
Exhaust made simple and affordable! Flowmaster direct-fit American Thunder muffler systems allow you to drop out your factory muffler and bolt-in an aftermarket muffler. American Thunder provides stainless steel construction and an aggressive exhaust tone, along with improved horsepower and torque--all while re-using factory hangers and mounting locations. Kits include installation instructions and all necessary hardware. A simple and effective performance upgrade with power you can feel and hear; customize your vehicle's personality with the legendary Flowmaster rumble of a direct-fit American Thunder muffler system.
Not Yet Reviewed
$599.95
$538.95
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$826.99
—
$855.99
D-Fit muffler replacements retain your OEM piping and tailpipe, while replacing your restrictive factory muffler. With stainless steel construction, you will have the flow, performance, and lasting quality you desire.
( 18 )
$504.00
Engineered to perform in the most extreme environments, aFe Atlas exhaust systems are constructed from mandrel-bent aluminized steel tubing with high-quality band clamps and OE-style bayonet hangers. Where applicable, free-flowing aluminized steel mufflers are used to absorb high-pitch tones producing a powerful sound and unleashing more horsepower and torque out of your rig. Atlas systems use factory mounting locations to provide a quick, hassle-free installation. Also included with some of these diesel exhausts are wrinkle-black powdercoated or polished 304 stainless steel tips with laser-cut stainless steel aFe badges. aFe Atlas exhaust systems are a tremendous combination of performance, fit, and value. Features include: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (some applications) * Available in a variety of configurations (varies by model) * Select systems include dual outlets and exhaust tips * Most do NOT fit cab and chassis models * Some models require tailpipe hanger modifications Notes: * Many of these are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws. * Select aFe Atlas exhaust systems may also require an aftermarket electronic module to work properly.
( 3 )
$523.95
—
$765.45
On Sale
Dinan high-flow mid-pipes upgrade the sound and enjoyment of your BMW. These pipes allow for an aggressive tone to be achieved from your stock system. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that's hard to ignore. This full mid-section removes the factory center section, including both resonators, and replaces it with straight-through T304 stainless steel tubing for better flow and sound—while also reducing the weight by 3 lbs. Order the kit designed for fitment on your vehicle model.
Not Yet Reviewed
$649.95
$583.95
The aFe Rock Basher exhaust systems are durable, purpose-built cat-backs for the 2018 Jeep Wrangler JL. They improve clearance over rough terrain for the adventurist who wants it all. The large 3 in. mandrel-bent 409 stainless steel tubing outflows restrictive factory exhausts, delivering gains of up to 9 hp and 8 lbs.-ft. of torque, as measured on aFe's in-house dyno. The free-flowing muffler delivers a power performance tone, while the Rock Basher's unique pre-axle turn-down tip handles off-road obstacles. These exhaust systems utilize factory mounts for a quick and easy install.
( 2 )
$523.95
aFe Rebel Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Rebel Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation with most applications requiring no modifications. Rebel Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. Depending on the specific application, they are constructed of 304 or 409 stainless steel and include black or polished 304 stainless steel tips (intercooled for diesels) with a laser-cut stainless steel aFe power badge. Key features of aFe Rebel Series exhaust systems include: * Cat-back, axle-back, downpipe-back, and DPF-back systems * Many systems have dual tips that exit in front of the rear passenger side tire for a unique custom look * Aggressive or mild tone mufflers available (varies by model) * OE-style bayonet hangers stabilize pipe location * Bayonet tips hold hanger bushings in place for a durable fit * 360-degree sealing surfaces for leak-free performance * Select systems have high-temperature, metallic black coated mufflers for the ultimate in corrosion protection Note: Some aFe Rebel Series exhaust systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 7 )
$541.80
—
$819.00
On Sale
Dinan high-flow X-pipes delivers a deeper tone and a more aggressive note, along with a noticeable increase in volume. Coupled with the associated Dinan exhaust, the sound is further perfected into an aggressive growl that harkens back to the Dinan E9x M3 racing middle exhaust. Rightly so as the same custom X that was used in that application is implemented on the new F8x chassis for that perfect mix of exotic undertones and raw aggression. Unlike a stamped X-pipe that is so common in the marketplace, the Dinan "X" pipes are thoughtfully designed for maximum flow characteristics and by themselves are works of art. Dinan X-pipes remove the factory center section after the secondary catalytic converters, including the large resonator. In its place you will have straight-through mandrel-bent 2.75 in. T304 stainless steel tubing and the custom "X" for better flow, and an improved throaty sound. kits come complete with mounting hardware, OE-quality clamps, and flanges for simplified installation.
Not Yet Reviewed
$649.95
—
$849.95
$583.95
—
$763.95
On Sale
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. Injen Race Series cat-back exhaust systems complement your vehicle's aggressive styling and performance with a straight through, single exit design developed to give you the most exhaust flow out of any cat-back system on the market. The entire length of the system features mandrel-bent, 304 stainless steel 3.00 in. (76mm) pipe with a rear section that tucks into the undercarriage and a single exit, straight-through tip. These features allow turbos to breathe and perform at their peak efficiency, while providing the most ground clearance possible, and the most exhaust flow with a race-inspired, deep exhaust note. Additional features and benefits: * High-quality exhaust band clamps provide the simplest, quickest installation possible * Uses all factory mounting points for simple and convenient placement and compatibility * Oversized tubing reduces restriction providing increased airflow and performance * Increased throttle response and decreased turbo lag * Hand-crafted and TIG-welded to perfection for strength and durability
Not Yet Reviewed
$641.95
$513.56
BBK's VariTune cat-back exhaust systems feature their VariTune mufflers that have a patented adjustable power valve inside, allowing full adjustment of the exhaust flow through the muffler chambers for great sound and added performance. This adjustment is made at the rear of the muffler with a wrench by either moving the valve in or out. Once you are happy with the level of sound, it is locked in place with the VariTune locking nut. All power valves are made with stainless steel for lasting durability and continued smooth operation. These patented BBK exhaust systems allow you to personalize the power and sound levels of your car 8 to 10 decibels and 10 to 15 hp. The aluminized steel piping with brushed stainless tips allow a direct bolt-on replacement for the restrictive factory system.
( 2 )
$649.99
AWE Tuning engineered their performance mid pipes to pair with AWE exhausts for additional sound tuning and performance. These robust stainless steel intermediate mid-pipes are designed to replace the factory mid-section of the vehicle's factory exhaust. If you're looking for more raw aggression—go non-resonated. If you're looking for an aggressive, yet sophisticated increase over your base exhausts volume, then go resonated. Choose the AWE Tuning performance mid pipes for your application needs.
Not Yet Reviewed
$738.16
MIG-welded for race-proven strength and durability, the aFe Vulcan Series Hi-Tuck exhaust systems utilize state-of-the-art computer-aided design technology for a custom, high-tolerance factory fitment. They are then finished off with a 4 in. Hi-Tuck tip that will give you extra clearance during extreme angle climbs or descents. They also use a factory-style flange and hangers, making them direct bolt-on systems which require no cutting or modifications. With a high-temperature finish and patent-pending intercooler design, the aFe Vulcan Series Hi-Tuck exhaust systems not only provide a rugged look but also reduce your vehicle's exhaust gas temperatures!
Not Yet Reviewed
$765.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
