Availability
Precision Turbo and Engine turbocharger discharge flanges are the best components for your project. These top-quality flanges are available in mild steel or stainless steel, and they will provide a proper seal that is strong and reliable.
( 1 )
$57.67
—
$86.52
DEI Turbo Insulation kits are designed to fit all turbos from the sport compact turbos to the large over the road trucks. Designed to reduce turbo lag and reduce under hood temperatures, these Turbo Insulation Kits add additional horsepower while protecting costly components from unwanted heat. The kits come complete with all the materials necessary for a clean, professional looking installation.
Not Yet Reviewed
$87.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$105.47
Vibrant Performance offers a variety of turbo inlet flanges for your custom fabrication projects. Crafted from T304 stainless steel, mild steel, and aluminum, Vibrant flanges are precision laser-cut and CNC-machined to ensure a perfect fit to your turbo components. Choose from their selection of inlet flanges for turbo manifold fabrications.
( 11 )
$51.75
—
$59.99
Vibrant Performance has turbo discharge flanges for your custom fabrication projects. Crafted from T304 stainless steel and mild steel, these flanges are precision laser-cut and CNC-machined to ensure a perfect fit on your turbo components. Choose from the Vibrant selection of discharge flanges for turbo manifold fabrications.
( 6 )
$51.75
—
$66.99
Turbonetics turbocharger inlet flanges will allow you to build or fabricate your own tubing to the turbocharger. Available for several turbo models, they can be easily fitted and welded to custom-make the tubing for your project.
( 3 )
$52.61
—
$92.08
On Sale
Precision laser-cut stainless steel ensures that COBB Tuning Subaru turbo heatshields can withstand years of abuse. They significantly diminish the venting of heat from exhaust gas temperature into the engine bay … reducing heat soak into key components that benefit from cooler ambient temperature, such as the intercooler. COBB Tuning stainless steel heat shields are designed in-house and are replacements for the factory turbo heatshields found on many turbocharged Subarus. Additional features of COBB Tuning Subaru turbo heatshields: * Works with stock or aftermarket downpipes * A modification that goes hand-in-hand with an aftermarket downpipe * The COBB logo is laser-etched and can be clearly seen--no matter how much heat is being deflected * A great addition to show cars and race cars alike NOTE: Designed for stock turbo applications only.
( 1 )
$99.00
$89.10
Clearance
Set your rig up with Dorman turbo up pipes for an upgrade that fits perfectly. Their turbocharger up pipes are direct replacements so your install will be convenient and the performance efficient. Dorman pipes are precision crafted with stainless steel tubular construction to protect against warping or cracking plus they are rigorously inspected and vehicle tested to ensure a trouble-free fit and performance. All include gaskets and may include bolts and nuts as necessary. You don't need a hassle to maintain the power of a leak-free flow; you just need the quality and value of Dorman turbo up pipes.
( 24 )
$120.99
$69.50
Universal HP Turbo Heatshield kits can help increase horsepower and reduce turbo lag while protecting other engine components from turbo-generated under-hood heat. Unlike sets that use exhaust wrap, the Heatshield Products kits feature extreme-temperature insulation materials, which provide greater heat protection, performance, and durability. Capable of withstanding 1,800 degrees F continuous, the shields feature a design for street performance and the most hardcore racing applications. The simple two-piece design of Heatshield Products HP Turbo heat shields includes comprehensive instructions, so installation is simple for novice and experienced installers alike.
Not Yet Reviewed
$87.99
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$95.95
Reduce turbo lag while protecting other engine components and help to reduce underhood temperatures with Lava turbo heat shields from Heatshield Products. These custom-fit components use extreme-temperature materials to keep the heat on the hot side of the turbo where it belongs. Installation is a breeze since you don't have to trim or fit the heat shield blanket to fit your turbo housings. Heatshield Products Lava turbo heat shields' silica contact layer and silica insulation make the turbo shields capable of withstanding 1,800 degrees F continuously.
( 9 )
$87.99
Heatshield Products Stealth turbo heat shields can increase boost, reduce turbo chatter or flutter, and help keep your turbo from lagging. By retaining heat inside the shields, your turbo not only becomes more efficient but your underhood temperatures also get reduced, lowering the intake temperatures, and adding power. Heatshield's low-profile black Stealth shields withstand up to 1,800 degrees F (continuous), and their custom design means that no trimming is needed, making installation a snap. Whether you're hardcore racing or in a street machine, heat kills performance—battle back against it with the Stealth turbo heat shields from Heatshield Products best suited for your application!
( 3 )
$92.99
On Sale
XDR inlet pipe heat shields are a great way to add a custom look, as well as an extra level of protection for your powersports utility vehicle. They're cut from 10-gauge 304 stainless steel and given a brushed finish for durability and good looks. XDR turbo heat shields are direct-fit components that easily bolt on.
Not Yet Reviewed
$94.95
$52.22
ZZPerformance is pleased to offer their LTG turbo heatshields that are constructed out of stainless steel, CNC-cut and bent for the perfect fit on your LTG powered car. These turbo heatshields feature a gorgeous, brushed finish, complimented by a laser-etched ZZP logo. They are designed for a quick and easy bolt-on installation and come with fastener hardware. Fits CTS, ATS, Regal, Malibu, and Camaro. Fits stock turbo only. Note: Due to underhood clearances heatshield may not fit with ZZP's catch can system.
Not Yet Reviewed
$99.99
Stainless Works turbo inlet flanges refuse to yield to the high heat of turbochargers. SW flanges are cut from heavy-duty 3/8 in. thick 304 stainless steel. They have a high-resistance to warping from the intense heat generated in turbo applications, and will offer leak-free sealing performance.
( 1 )
$52.25
In the long list of turbo failure causes, what ranks toward the top? Oil loss! Dorman turbocharger oil lines help to prevent this issue. They are designed as a direct replacement for an OE fit, and a seamless transfer of lubricant to and from the engine's turbocharger. These lines are of the highest in reliability, as they have undergone strict SAE testing to guarantee they meet or exceed the standards for burst, tensile, cold bend and leakage. Whether you are upgrading your factory turbo, or just want to guarantee the reliability of your ride, you can rest easy by using these Dorman turbocharger oil lines.
( 2 )
$67.99
—
$85.99
Kooks manufactures the highest of quality products in the industry, delivering headers and exhausts to meet all of your performance needs, including exhaust down pipe reducers. These versatile 3 in. to 2.25 in. adapters will allow you to run one or more of Kooks own 3 in. performance down pipes (sold separately) with either the stock exhaust or an aftermarket 2.25 in. exhaust system. That makes these adapters perfect for upgrading your EcoBoost in stages—without breaking the bank! Kooks Headers exhaust down pipe reducers feature: * Manufactured from T304 stainless steel tubing for strength and superior corrosion resistance * Designed to allow you to install a 3 in. Kooks down pipe on 2015-2019 EcoBoost Mustang models equipped with the stock exhaust or a 2.25 in. cat-back system
Not Yet Reviewed
$77.55
Summit Bucks
Dyno tests prove it—Dynomax's Super Turbo mufflers are the closest you can get to running an open pipe, but a lot quieter. To make things even better, Super Turbos have more features than most other mufflers put together: less backpressure for improved quarter-mile times; durable construction for long life and good looks; patented flow directors that channel exhaust for maximum performance; and fiberglass matting for a deep, throaty, powerful performance tone. The mufflers are available in a variety of configurations; inlet/outlet quantities, sizes and locations; both universal and vehicle-specific applications. They are offered in stainless steel or aluminized steel construction.
( 491 )
$53.99
—
$104.99
On Sale
Pypes Exhaust Turbo Pro mufflers feature flow control channels that eliminate drone, resonance, and flow turbulence while maintaining a steady flow of exhaust gases, resulting in a truly quiet performance exhaust note. The flow progression of these mufflers mimic the cfm of a straight pipe without the annoying drone or resonance. You can expect a quiet mellow tone with a true performance sound. Turbo Pro mufflers feature 409 stainless steel welded cases designed to withstand the output of today's big motors and they come with Pypes' famous lifetime warranty.
( 20 )
$108.79
—
$109.79
$98.79
—
$99.79
Summit Racing™ Turbo Flex Couplers are stainless steel couplers designed to isolate flexing, expansion and engine vibration from your exhaust components. Limiting vibration and expansion will help prevent cracks in your headers, turbo manifolds, downpipes, as well as the rest of the exhaust system. Our couplers are built with an interlock liner that is compatible on boosted applications and can flex in multiple directions.
( 13 )
$69.99
—
$85.99
Get a throaty exhaust sound on acceleration, and quiet operation at idle and cruising speed with one of these Hooker Competition Turbo mufflers. They feature double-wrapped, aluminized steel construction and a low backpressure baffle network using large, free-flowing cores with reverse flow. Their compact design allows flow in either direction, which makes installation easy. They'll also improve your engine's efficiency, resulting in better performance and economy.
( 23 )
$69.69
Made with free-flowing large diameter tubing—as much as 20 percent more than some competitors—Summit Racing™ Turbo mufflers offer you deep performance tone without being too loud. They feature 2.5 in. internal cores with 360 degree perforations, roll-seamed end caps, 100 percent aluminized construction, and seam locked cores that prevent the center baffles from twisting out. Installation is a breeze with their fully reversible design. The mufflers are available in a variety of inlet/outlet diameters and locations. Order the model that best fits your application.
( 134 )
$50.99
—
$75.99
If you want a mean muffler that won't tear the guts from your wallet, get a Raptor! Flowtech Raptor turbo mufflers feature a unique sound rib case design and aluminized, lock-seal construction. Gigantic, high-output flow tubes provide more horsepower, better mileage, and pure performance sound!
( 40 )
$51.95
—
$56.95
Summit Bucks
Thrush Turbo mufflers feature Tri-Flow Technology for better performance and sound. They have 100 percent aluminized coated shells for longer life and are reversible for maximum flexibility. Thrush Turbo mufflers are available in different inlet/outlet sizes and configurations.
( 216 )
$52.99
—
$99.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
