Availability
Keep heat where it belongs, in the pipes! DEI Titanium exhaust and header wrap kits are very soft and you don't have to wet it or worry about fibers getting in your skin. The goal is decreased heat radiation and increased engine performance. It is made from powdered lava rock and woven into a fiber material. Engineered to be tougher than most wraps and more durable for improved thermal performance and reliability, it is perfect for any automotive or motorcycle application. Additional features: * High resistance to chemical, oil spills, and abrasions * Reduces temperature and vibration breakdown * Extremely pliable for easy install * High strength and light weight
( 66 )
$102.99
It's true--cooler plug boots will actually help your engine perform better by reducing the risk of arc-over from burned boots. Our Summit Racing™ plug boot protectors are designed to keep those boots (and wires, too) cool and happy. They're guaranteed up to 1,200 degrees F!
( 264 )
$50.99
—
$53.99
Design Engineering Titanium Protect-A-Boots stop the meltdown under your hood! High horsepower creates loads of extreme heat that can put your spark plug boots, wire, and ignition system at risk. DEI Protect-A-Boots feature a unique material mined from lava rock, then stranded and woven into a tight weave that's pliable, strong, and can handle up to 1,800 degrees F. These sleeves resist most abrasions, chemicals, and contaminants. DEI Titanium Protect-A-Boots offer thermal protection for your plugs and wires.
( 66 )
$72.99
—
$75.99
DEI titanium exhaust wrap with LR technology is constructed from pulverized lava rock, extruded into fibers, and then woven into a tight weave, giving it titanium-like strength and toughness. The improvement in thermal protection helps to reduce underhood temperatures, resulting in cooler air intake for improved performance. And less heat in the engine bay means less chance of heat soak conditions on vital underhood components. Typical glass fiber wrap is rated at handling 1,200 degrees F of maximum direct heat, while DEI's titanium wrap, using LR technology, is capable of handling direct continuous heat up to 1,800 degrees F and radiant heat up to 2,800 degrees F. And because it's pliable, there's no need to wet the wrap when wrapping headers or pipes, as many do in order to make the wrapping process easier to manage and to get a tight wrap. Titanium wrap will not shrink, and because of its material structure, it is more resistant to temperature and vibration breakdown, abrasions, chemical and hot oil spills than glass fiber wrap. Plus, DEI titanium wrap offers a very cool carbon fiber look as an added feature!
( 251 )
$63.99
—
$105.99
These flexible clamp-on pipe heat shields from Thermo-Tec block over 98 percent of the damaging radiant heat of the exhaust. The high-tech composite construction of the heat shields provides the ultimate in protection. Available in 1, 2, and 3 ft. lengths, these clamp-on pipe heat shields use Thermo-Tec's proprietary coating technology.
( 30 )
$64.19
—
$93.72
On Sale
Summit Racing™ Volcano exhaust wraps help your ride erupt with power! Made from crushed lava rock, our wraps help to maintain hotter exhaust gases, decrease density, and enable gases to exit faster for better scavenging and increased horsepower. We offer a selection of widths and lengths to wrap up any of your applications. Add a burst of power without blowing your budget with Volcano exhaust wraps from Summit Racing™
( 33 )
$87.99
—
$100.98
$77.99
—
$90.98
By wrapping your headers with Thermo-Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent, and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2,000 degrees F, and installs easily with standard hose clamps or the optional stainless steel Snap Straps.
( 114 )
$51.30
—
$110.35
DEI Fire Wrap 3000 offers ideal protection against intense underhood heat, making it perfect for protecting hoses, oil and fuel lines, and electrical wiring. DEI Fire Wrap 3000 is constructed from a woven fiberglass braided sleeve that is heavily coated with 100 percent iron oxide silicone rubber. Its unique hook-and-loop design allows you to install it easily without disassembling anything. Capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent, DEI Fire Wrap 3,000 provides excellent protection against harmful heat.
( 23 )
$51.99
—
$74.99
Insul-Boot heat shields from Heatshield Products have double-wall construction for superior protection. They help prevent misfires caused by plug-wire burnout that could lead to critical engine damage and loss of performance. The Insul-Boots are available in a range of color choices. Their special heat coatings help reflect and dissipate heat to protect your expensive plug wire sets, and their versatile design allows them to fit most boots, even 90 degrees. For reliable heat protection, choose Heatshield!
( 33 )
$62.99
Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees F, they fit most straight or 90-degree boots.
( 79 )
$64.99
—
$79.99
Protect your starter motor and solenoid with Heatshield Products Lava Starter Shields. Using their patented and proven crushed volcanic rock fiber, the Lava Shields create an ideal thermal barrier, guarding against heat sources like headers. And they do not conduct electricity, so there are no worries of a short happening between exposed starter terminals and the wrap. They easily install with the hook-and-loop fasteners. High heat is damaging, and your starter and solenoid are mounted in the hottest area of your vehicle's engine bay. Armor them against constant temperatures as high as 1,200 degrees F, and short-term temperatures as high as 2,000 degrees F, with Heatshield Products Lava Starter Shields.
( 41 )
$55.99
—
$69.99
Do you want to know a great way to shield your wiring, lines, and cables safe from heat? Use Heatshield's Thermaflect sleeves! They act as thermal barriers, capable of reflecting up to 90 percent of radiant heat away, and can withstand 1,100 degrees F of continuous radiant heat and 500 degrees F of direct heat. Now, that's impressive! They're great for use on your fuel lines, wiring looms, air intake, intercooler pipes, air conditioner hoses, and more. By keeping the fuel and air intake temperatures cool, they help to deter vapor lock, improve performance and mileage, and reduce fuel evaporation. Achieve superior radiant heat protection--use Heatshield Thermaflect sleeves!
( 68 )
$50.99
—
$122.99
Summit Racing™ Volcano spark plug boot protectors have crushed lava rock filament fibers that make the boots stronger and more flexible, while operating at maximum service temperatures of 1,800 degrees F continuous and 2,500 degrees F intermittent radiant heat. Volcano products have a custom carbon fiber look. Plug boots are sewn together with Kevlar© / stainless steel thread. They contain a layer of Volcano Fiber in addition to aluminized/fiberglass material. The two layers of insulating material add to the thermal protection of the product.
Not Yet Reviewed
$64.99
Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI has introduced a revolutionary advancement in Titanium pipe shield with LR technology that greatly outperforms Mylar-backed glass fiber shields. This exhaust wrap combines the high-heat tolerance of DEI's proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900 degrees F, with the Mylar outer material cracking and flaking off. DEI's titanium pipe shield provides heat protection up to 1,350 degrees F. LR fiber is a two-ply material. The outer layer is made from lava rock pulverized and stranded into a proprietary, tightly woven weave for durability and strength. The inside material is made of a special high temperature-resistant fabric (89 percent silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology, combined with DEI's unique shield standoff bracket design, provides an air gap between the shield and pipe that maximizes the potential for cooling and heat dissipation. With the strategic placement of DEI titanium exhaust wrap near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks, or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.
( 45 )
$52.99
—
$87.99
Heatshield Armor exhaust heat shield insulation keeps heat in the exhaust system, which creates a scavenging effect, allowing exhaust gases to flow out of your system faster. Plus, it prevents radiant heat from entering your driver's compartment and stops damage to other vehicle components by reducing radiant heat from your exhaust pipe by up to 60 percent. This product features BioCool insulation that makes it capable of withstanding 1,800 degrees F continuous and 2,200 degrees F intermittently. Installation takes only minutes, plus the outside layer resists the elements and accepts cleaning for prolonged life. Choose from a large selection of thicknesses, widths, and lengths to match your application and wrap your pipes for performance with Heatshield Armor exhaust heat shields.
( 83 )
$63.66
—
$126.99
DEI Heat Shroud sleeving solves the problem of heat and abrasions causing failure of lines, hoses, and wires without the need to disconnect them. Offered in two different materials, both provide high-temperature protection and the added convenience of a hook-and-loop closure design that eliminates the need of removing one end of connected wires, cables, or hoses to install. Heat Shroud with glass fiber fabric and aluminized outer facing has the versatility of fitting diameters from 0.5 in. to 2.5 in. diameter, is easy to trim to length, and reflects 90 percent of radiant heat. For more demanding applications there is DEI Heat Shroud GOLD featuring metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base (rated to 1,100 degrees F) material. It is able to reflect radiant heat up to 800 degrees F and will fit diameters from 0.5 in. to 1.25 in.
( 69 )
$52.99
Techflex Insultherm header wrap is extremely high-temperature resistant (up to 1,200 degrees F) and is commonly used to contain and manage hot gases in automotive and high performance headers and exhausts. Insultherm header wrap is manufactured from texturized fiberglass yarns that are woven into a strong and flexible wrap with vermiculite coating. Remember, when installing Insultherm exhaust wrap, overlapping 1/4 in. is perfect as this allows just enough heat out to ensure performance without damaging your exhaust.
( 17 )
$50.79
Summit Racing™ insulated wire sleeves provide more heat protection and extra insulation during higher voltage. Ideal for covering spark plug wires, the thermal sleeves are made of silicone rubber, sold in 25 ft. rolls—and are available in multiple colors.
( 8 )
$62.99
Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires that you don't want to remove. It can also be wrapped around odd-shaped components for lasting heat protection. Wrap it around a fuel line and say goodbye to vapor lock. It reflects radiant heat up to 2,000 degrees F.
( 22 )
$61.00
Battle the heat and high temperatures with Heatshield Products Muffler Armor. These sheets feature a BioCool thermal-barrier material that withstands 1,800 degrees F of continuous heat and helps reduce radiant heat from mufflers by up to 70 percent. The heat shields will resist water and chemicals, plus they include stainless steel locking Thermal-Ties for an easy installation (order the part number with the number of anchors or ties best suited for your application). Muffler Armor keeps the heat in the muffler while reducing temperatures in the passenger and trunk compartments. Improve engine efficiency and keep exhaust flow velocity high with Heatshield Products Muffler Armor.
( 15 )
$89.99
—
$101.99
Heatshield Products Armor exhaust heat shield kits have what you need to insulate your pipes. These kits include a heat shield Armor blanket, locking ties, and instructions. Wrapping your high performance application keeps heat in the exhaust system, which creates a scavenging effect, allowing exhaust gases to flow out of your system faster. Plus, it prevents radiant heat from entering your driver's compartment and stops damage to other vehicle components. Heatshield Armor kits can withstand 1,800 degrees F continuous and 2,200 degrees F intermittent. Plus, installation takes only minutes! Keep the heat off of your feet and components with Heatshield Products Armor exhaust heat shield kits.
( 11 )
$100.99
DEI Titanium Protect-A-Wire kits offer the ultimate protection for your ignition wires! Capable of withstanding extreme hot or cold temperatures, these kits armor your wires exposed to the extreme heat of exhaust manifolds and headers, plus they are oil and chemical-resistant. DEI Protect-A-Wires were developed with their Titanium LR fiber technology, making them capable of withstanding temperatures of up to 1,800 degrees F of direct heat and 2,500 degrees F radiant. Your kit will include eight DEI and 16 numbered heat-shrink tubes to ensure that the plug wires are connected to the correct cylinder, and 25 ft. of Titanium-colored sleeving. Dress your wires for the heat with DEI Titanium Protect-A-Wire kits.
( 13 )
$89.99
Dress up your hot rod with an old-school look, but with modern heat shield technology, by using Heatshield hot rod sleeves. The special weave of these thermal sleeves allows them to expand and contract over fittings and terminals. They're capable of withstanding 1,100 degrees F continuous and are non-flammable. They're perfect for shielding fuel lines, helping to stop vapor lock and protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Do you have a custom build ahead of you? You'll want to use Heatshield hot rod sleeves.
( 145 )
$50.99
—
$79.99
DEI titanium knitted exhaust shield sleeves are available in different pre-cut lengths. They have a maximum temperature rating of 1,800 degrees F (Fahrenheit) with a continuous rating of 1,382 degrees F. The sleeves are perfect for larger exhaust pipes, as they can expand up to 1.5 times their normal diameter, allowing you to install them over flanges and sensor threads. They can also be cut to length, then you simply roll the ends. Protect components and keep heat from transferring into the vehicle cabin with an assist from the DEI Titanium Knit Exhaust Shield Sleeves best suited for your application. More product features, items, and specifications include: * Ties and tool * Hi-tech carbon fiber look * Reduces temperature/vibration breakdown * Pre-wetting roll not necessary for wrapping * Extremely pliable for a tight and secure wrap * Wrap for 4 in. pipe will also fit 5 in. pipe * Wrap for 3 in. pipe will also fit 4 in. pipe * Promotes increased flow for improved performance * Resistance to abrasions and oil spills
Not Yet Reviewed
$66.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
