Availability
Showing In Stock Items. Show All 40 Items.
On Sale
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 32 )
$301.95
—
$499.95
$271.75
—
$448.95
On Sale
Cast from high-quality molds for proper fit, these Scott Drake exhaust manifolds will get that engine restoration on the right track to a throaty roar. Whether you are replacing a stock corroded manifold or getting to that exhaust portion of a rebuild, these manifolds will get that engine back to its deep throaty growl that you love.
( 37 )
$291.95
$262.75
On Sale
These Hooker LS cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement engine swap applications. Their contoured design aims the exhaust directly at the exit port for greatly improved flow. They are cast from high silicon moly ductile iron to provide durability, leak free performance and less under the hood noise than conventional headers. The Hooker LS cast iron exhaust manifolds are recommended for strong performance on engines up to 500 horsepower and are available in plain as cast finish or with Hooker ceramic coatings for reduced engine temperatures and improved corrosion resistance. They also feature 304 stainless steel mating flanges to help provide a leak-free installation, and a two bolt exit flange which can be used with OEM style gaskets and fasteners for an excellent seal.
( 38 )
$479.95
$430.95
On Sale
Authentic cast iron reproductions, Scott Drake high performance exhaust manifolds feature the correct markings and raised part numbers for these performance cars. They're engineered exactly like the original for longevity and trouble-free installation. Let your classic car breathe and hear that roar that screams power and performance.
( 40 )
$462.95
$415.95
On Sale
Hooker Blackheart LS swap headers are constructed from mandrel-bent, 18-gauge 304 stainless steel. The headers are available with 1 3/4 in. or 1 7/8 in. primary tubes and 3 in. collectors—and tube geometry is designed for maximum clearance and hassle-free installation. Swap out that old iron and upgrade your overall performance with the Hooker Blackheart LS swap headers. Depending on application, features may include: * Lightweight 18-gauge, 304 stainless steel construction for good looks, maximum strength, and superior corrosion resistance * 1 3/4 in. primary tube diameter and 3 in. collector model is ideal for "hot" LS1/LS6/LS2/LS3/LS7 or 5.3L-6.0L engine swaps * Long-tube header design allows engine to breathe more freely, resulting in more mid-range and top-end power gains * 3/8 in. thick, CNC waterjet header flanges are used for strength and maximum sealing surface * All hardware included * Hooker Headers limited lifetime warranty
( 4 )
$433.95
—
$549.95
$389.95
—
$493.95
On Sale
Hooker Blackheart LS swap exhaust manifolds provide stainless steel versions of their popular cast iron lineup of LS swap exhaust manifolds based on the 8502HKR family. The new stainless steel manifolds offer several advantages over the cast iron versions, including increased durability, reduced weight, and improved corrosion resistance. The shorty tight-tuck design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Available in both natural cast (factory look) and polished, Hooker Blackheart LS swap exhaust manifolds include all the necessary hardware (gaskets, bolts, and flanges). More product features include: * 2 1/2 in. outlet diameter offers improved flow for maximum performance from a cast exhaust manifold * Tight-tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance * Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware * Stainless Steel construction for unmatched durability and corrosion resistance * Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
( 3 )
$433.95
—
$549.95
$389.95
—
$493.95
On Sale
Hooker Blackheart LT swap exhaust manifolds are intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired. The 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold, and a tight tuck design provides a universal fit for most popular chassis, as well as a clean traditional muscle car appearance. OE-quality MLS flange gaskets and hardware are included to ensure excellent fitment and a leak-free installation. Hooker Blackheart LT swap exhaust manifolds are available in plain as-cast finish, or black or silver ceramic coatings for reduced engine compartment temps and improved corrosion-resistance. Features of Blackheart LT swap exhaust manifolds: * Cast from Hi-Silicon-Moly Ductile Iron * Contoured design guides the exhaust directly toward the exit port for improved flow and minimal turbulence * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included for installation * Provides years of leak-free performance with less underhood noise than traditional headers * Shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance * Patent Pending design
Not Yet Reviewed
$417.95
—
$549.95
$302.95
—
$475.95
On Sale
These BD Diesel exhaust manifolds help you maximize your engines true potential. Your stock manifolds can require extensive cleaning and machining to be recovered from warping and distortion. These heavy-walled manifolds are coated to resist corrosion, with some models even predrilled for pyrometer probes. BD Diesel exhaust manifolds are great preventative upgrades whenever you're doing other engine work.
( 45 )
$289.95
—
$588.95
$260.96
—
$530.06
On Sale
Flowtech Rams Horn exhaust manifolds feature a tightly fit block-hugger design for popular hot rod and street rods. The cast iron construction is styled in the vintage "Rams Horn" design for maximum strength and engine clearance. The manifolds use smooth-transition, 1 5/8 in. diameter primaries for increased exhaust flow, which means improved performance and throttle response. The thick header flange pads ensure a strong, leak-free seal.
( 21 )
$359.95
—
$599.95
$323.95
—
$431.95
On Sale
Patriot cast iron manifolds designed for GM LS engines offer a wide variety of fitment applications maximizing engine bay clearance. They also incorporate a sealing dome and ships with a pair of 304 series stainless steel reducers to help route your exhaust system with more adjustment options than the competition--no more expensive GM gaskets needed to get you on the road. Patriot cast iron manifolds will fit many of their LS engine swaps. Finishes offered for Patriot cast iron manifolds: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw cast is available for individual customizing
( 15 )
$348.50
—
$492.80
$313.65
—
$443.52
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$331.95
—
$449.95
$298.75
—
$403.95
On Sale
BladeRunner exhaust manifolds from aFe are made from 304 stainless steel and feature a one-piece design with reinforced ribs between each exhaust port. This increases strength and eliminates the cracking found in most stock and aftermarket units. These manifolds feature two EGT probe ports, a thick wall design for increased strength, matched ports, and a merged runner design to maximize exhaust flow. Once you've installed a BladeRunner on your ride, you'll be able to feel improved turbo spool-up times, throttle response, and decreased EGTs. For top performance, choose an exhaust manifold from aFe.
( 5 )
$580.65
$522.59
On Sale
Hooker manifold-back Competition exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 37 )
$399.95
$359.95
On Sale
Flowmaster manifold downpipes are designed for the person who wants to use a crossmember-back exhaust system while using the factory exhaust manifolds. Utilizing mandrel bent 409S stainless steel tubing and high quality flange gaskets. Flowmaster's manifold downpipes are designed for the perfect leak free fit. Features: * Mandrel-bent 16 gauge stainless steel tubing * Designed to be used without heat riser * Adapt exhaust to factory manifolds * Large 2.50-inch manifold downpipes
( 41 )
$376.95
$339.25
On Sale
XForce dump pipes allow for easier release of the high pressure built inside the turbo, thus preventing clogging, and allowing the engine to breathe more freely. In turn, you get more horsepower, throttle, and better fuel economy. Manufactured using a specific, clever design, these dump pipes are made of high-quality 304 stainless steel and a mandrel bend construction, whereas stock exhaust pipes are manufactured using mild steel. Ensure the free flow of exhaust gases through your exhaust system for your vehicle's efficient performance with XForce dump pipes! Order the model for your application.
( 6 )
$395.10
$335.84
On Sale
XForce dump pipe and cat kits are designed and crafted from stainless steel with 100 cell high-flow metallic catalytic converters. They are offered for many different applications to increase performance and sound. Add a little attitude to your ride with XForce dump pipe and cat kits.
Not Yet Reviewed
$535.50
$455.18
On Sale
Unlock your Jeep's performance potential with one of these Crown Automotive exhaust kits. They contain direct replacement parts built to OE specifications and fit just like the factory exhaust. These mufflers and other components are made from high-strength materials, with each part designed to ensure excellent durability. The proper exhaust system can enhance a vehicle's horsepower. Choose the style that best suits your specific application, such as muffler-back, cat-back, or manifold-back. You'll get the most out of out of your driving experience with Crown parts.
( 27 )
$282.99
—
$518.99
$254.69
—
$467.09
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 87 )
$340.95
—
$827.95
$302.95
—
$538.95
On Sale
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$279.99
—
$499.99
$251.99
—
$449.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$278.95
—
$749.95
$251.05
—
$493.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$425.45
—
$590.40
$382.90
—
$531.36
On Sale
RT Off-Road headers are designed to improve your exhaust flow. The manifold features a pair of 1/2 in. thick zinc-coated flanges to provide a perfect seal to the cylinder head and downpipe. The primaries are manufactured of 1 1/2 in. diameter polished, mandrel-bent 304 stainless steel tubing. A 6-to-1 polished 304 stainless steel collector improves exhaust flow through the entire operating range of the engine. The headers are fully-welded to the flanges and collector, resulting in an extremely strong and leak-free header. If you're planning on an upgrade to your exhaust, order and install these performance headers from RT Off-Road.
( 2 )
$372.99
$335.69
On Sale
Hooker LS turbo crossover tubes connect the two turbo exhaust manifolds. Hooker offers several versions (including a universal component kit) for an optimal fit and ground clearance based on your transmission and bellhousing. The crossover tubes are made from 16-gauge, mandrel-bent 304 stainless steel, and include flex joint and V-band flanges welded on for an easy bolt-on fit. Join your LS turbo manifolds for performance with Hooker crossover tubes.
( 13 )
$319.95
—
$433.95
$287.95
—
$389.95
On Sale
Hedman traditional block hugger headers feature a design that is ideal for factory manifold replacements or engine swap projects that do not have a header designed specifically for that application. Hedman block huggers have an extremely low profile, only Hedman Tight Tubes headers offer more clearance. They are offered in mild steel and stainless steel either coated or uncoated to meet your performance and budgetary needs. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 61 )
$279.99
—
$579.99
$251.99
—
$521.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
