Availability
Cal Custom™ finned exhaust side pipe plugs are designed to create the custom exhaust look you're searching for. They are a perfect addition to other Cal Custom™ finned parts and have a" LEADSLED" logo in the middle. Cal Custom™ finned exhaust side pipe plugs will show the crowd the detail which you've pursued in customizing your ride.
Not Yet Reviewed
$39.99
—
$40.79
No one knows custom performance headers and exhaust systems quite like Beyea. Their products are used by top race teams and engine builders throughout the country. Beyea exhaust turndowns are small, but important finishing touches to your muffler, and they're available in a variety of lengths, diameters, and cuts for an easy weld-on installation.
( 3 )
$33.79
—
$37.79
Mac's dyno heat sleeves protect tie-down straps from temperatures of up to 600 degrees F--because we all know what hot pipes do to a strap! They protect your tie-down straps against failure due to heat contact.
Not Yet Reviewed
$39.95
ARP manufactures a variety of header bolt kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point heads.
( 334 )
$20.99
—
$31.99
ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.
( 63 )
$47.99
—
$59.99
Summit Racing™ exhaust tubing is made from aluminum-coated steel, either 14 or 16 gauge. After welding, the weld seam is given another aluminum spray coating to prevent rust. The tubes are available in a variety of lengths, diameters, and configurations. Depend on Summit Racing™ tubing for your next mild to wild custom exhaust project.
( 64 )
$21.99
—
$50.99
Summit Racing™ stainless steel exhaust tubing is available in 14- or 16-gauge material. The T409 straight sections are available in a variety of tubing diameters to help you build a custom exhaust system. Increase the life and durability of your exhaust with Summit Racing™ stainless steel tubing.
( 35 )
$22.99
—
$35.99
Summit Racing™ offers polished T304 stainless steel exhaust tubing in a variety of diameters to assist in your custom project. The 18-gauge stainless steel will resist rust and corrosion, providing long-lasting performance.
( 13 )
$47.99
Walker Performance exhaust elbows are high-quality components that are great for the do-it-yourselfer or for fabricating custom exhausts. They are available in a variety of diameters, bends, and lengths to suit your needs.
( 386 )
$21.99
—
$58.99
Vibrant Performance mandrel-bent round tubing offers perfect curves for your custom creation. These individual tubes are manufactured from stainless steel to withstand acidic, high-heat, and corrosive conditions. From incredibly tight U-bends to the slightest 15 degree bends, you can pick from 1.25 in. to 5 in. outer diameters to complete your project. Vibrant Performance mandrel-bent tubing is ideal for creating your custom exhaust, headers, downpipes, and intercooler pipes. And, with their choice of more sizes and more bend angles, you get more options. There's a good chance you can get exactly what you need, to complete your fabrication project perfectly!
( 180 )
$25.50
—
$55.99
Looking to put some custom curves in your exhaust pipes? Vibrant Performance pie cuts are available to fabricate 45 or 90 degree elbows. They're offered in all the standard O.D. sizes—from 1.50 in. up to 4.00 in.—for a precise match to your current pipes (or the ones you're upgrading to). Level up your customization game with Vibrant Performance pie cut sets.
( 6 )
$30.99
—
$55.99
Summit Racing™ offers stainless steel exhaust hangers in a variety of styles and lengths. They're available for different pipe diameters, with or without polished stainless exhaust clamps. Outdated hangers often fail to properly secure your pipes, leading to vibration, noise, and cracks at the seams. These updated hangers are ideal for custom exhaust systems. Order the model and quantity needed for your application.
( 14 )
$26.99
—
$43.98
The possibility of having an exhaust made up entirely of straight tubing without a single bend is akin to winning the lottery. AP Exhaust understands the complications in building a system—and offers practical solutions, such as mandrel-bent exhaust elbows in many different lengths, angles, and sizes to fit your needs. AP produces its tubing in-house before bending to ensure excellent quality-control and uniform materials. Whether designing a custom system or replacing an older unit, you'll find your mandrel-bent elbows here from AP Exhaust.
( 156 )
$21.99
—
$52.99
These individual mandrel bends from Stainless Works are great to have on hand for replacement pieces, or just to customize fabricated exhaust designs. These bends are made to provide an easy, high flow, unlike kinked designs, which can be restrictive.
( 45 )
$20.95
—
$53.86
Rattle and shake--Vibrant Performance stainless steel TurboFlex couplings offer vibration control for your fabricated exhaust system! High performance (especially forced induction) applications can stress out your exhaust. TurboFlex from Vibrant offers vibration isolation to save your system! Made from T304 stainless steel, these couplings feature an internal interlock liner that aids in the smooth flow of high-temperature exhaust gasses. Two-ply, stainless constructed bellows surround the liner, and that's wrapped with a stainless outer braid and finished with 409 stainless end caps for superior construction to make your custom fabrication exhaust a success! Vibrant Performance TurboFlex couplings are your solution to high performance forced induction rattle and shake problems.
( 52 )
$29.50
—
$52.50
Quick Time Performance adjustable turndowns let you direct exhaust flow your way with a 360 degree rotating flange. These versatile exhaust turndowns are available in a choice of sizes to fit your exhaust. Quick Time Performance adjustable turndowns rotate a full 360 degrees, making them ideal for a custom install.
( 100 )
$31.45
Summit Racing™ Volcano Starter Heat Shield Wraps have crushed lava rock filament fibers that make the wraps stronger and more flexible, while operating at maximum service temperatures of 1,800 degrees F continuous and 2,500 degrees F intermittent radiant heat. Volcano products have a custom carbon fiber look. Starter shields are sewn together with Kevlar© / stainless steel thread. They contain a layer of Volcano Fiber in addition to aluminized/fiberglass material. The two layers of insulating material add to the thermal protection of the product.
( 3 )
$46.99
XForce mandrel-bent tubing gives you the flexibility you need for your custom projects. These individual bends are manufactured from stainless steel to withstand acidic, high-heat, and corrosive conditions. They are available from 15 degree bends to 90 degree bends with diameters ranging from 1 to 3.5 in. XForce mandrel-bent tubing is ideal for creating your own exhaust, headers, downpipes, and intercooler pipes.
( 10 )
$20.70
—
$45.00
Dress up your hot rod with an old-school look, but with modern heat shield technology, by using Heatshield hot rod sleeves. The special weave of these thermal sleeves allows them to expand and contract over fittings and terminals. They're capable of withstanding 1,100 degrees F continuous and are non-flammable. They're perfect for shielding fuel lines, helping to stop vapor lock and protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Do you have a custom build ahead of you? You'll want to use Heatshield hot rod sleeves.
( 147 )
$20.99
—
$50.99
Hedman 180 degree mandrel bends feature the same quality as their famous headers. Made of mandrel-bent mild steel, these bends are perfect for making your own headers with Hedman Hustler flanges, or for customizing other parts of your exhaust system. They come available in several different diameters, radii, and leg lengths.
( 4 )
$22.99
—
$47.99
Want to give your exhaust system a show-car look? Silverline exhaust tips are the answer. They offer a wide variety of styles to create a custom look and sound—available in every popular shape and inlet size, including straight or curved, long or short, single or dual, square, round, or oval. All Silverline exhaust tips are made of aircraft-quality T304 stainless steel finished in high-polish, nickel-black smoke, chrome, or "off-road" powdercoat. Tips with the "TK" prefix feature the laser-etched Silverline logo.
( 69 )
$22.99
—
$48.99
Stainless Works stainless steel straight exhaust tubing welds beautifully with 308 straight filler, and can be mirror polished. It's ideal for for the enthusiast fabricating a custom setup or as replacement pieces for your existing exhaust. Stainless Works stainless steel exhaust tubing is Mil Spec and certified 304 stainless steel.
( 115 )
$23.75
—
$55.10
These 180 degree bends from Patriot feature the same quality as their famous headers. Made of mandrel-bent mild or stainless steel these bends are perfect for making your own headers with Patriot header flanges or for customizing other parts of your exhaust system. Patriot 180 degree bends are available in several different diameters, radii, and leg lengths.
( 121 )
$23.30
—
$47.70
These Walker Universal Tru-Fit mufflers feature aluminized steel covers and heads. Walker Universal Tru-Fit mufflers are designed to provide installers and DIY customers with economical performance and acoustics and ease of installation.
( 44 )
$34.50
—
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
