Availability
Showing In Stock Items. Show All 66 Items.
On Sale
Hooker Blackheart engine swap exhaust systems are designed to offer the best available ground clearance and fit, along with easy installation. They use factory mounting points for stock-like fitment and are designed for clearance with OE or aftermarket adjustable rear upper control arms. Order the Hooker Blackheart engine swap exhaust kit best suited for your engine swap application. Features: * Full 2.5 in. or 3 in. (depending on application) diameter system for maximum flow/horsepower potential * Constructed from lightweight, 18-gauge, mandrel-bent, 304 or 409 stainless steel (depending on application) for maximized strength and durability * Optimized bend geometry provides clearance for wide rear wheels/tires (in the factory wheel well) * Tube geometry designed for maximum clearance and hassle-free installation with all necessary installation hardware included * Manufacturer's limited lifetime warranty
Not Yet Reviewed
$1,349.95
—
$1,499.95
$1,213.95
—
$1,348.95
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$1,084.79
$1,044.79
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$1,232.79
$1,192.79
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$1,230.79
$1,190.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$1,228.79
$1,188.79
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 540 )
$1,259.99
—
$1,655.99
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 932 )
$1,016.99
—
$1,723.99
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 280 )
$1,265.99
—
$1,625.99
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 607 )
$1,026.00
—
$1,460.00
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 162 )
$1,119.95
—
$1,599.95
$1,006.95
—
$1,438.95
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,799.95
$1,033.95
—
$1,618.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$1,799.95
$1,003.49
—
$1,618.95
Make your truck look and sound great with these MagnaFlow Black Series Performance exhaust systems. Available in a wide variety of styles and configurations, these units are constructed from mandrel-bent stainless steel tubing to keep the gasses flowing without excessive, power-robbing restrictions. The Black Series exhausts also feature a black ceramic coating that not only looks great, but helps to protect your exhaust system from the elements as well. MagnaFlow dyno-tests these exhaust systems to ensure proven horsepower and torque improvements, while still maintaining a great sound. Each Black Series Performance exhaust comes fully welded and built to last for years of headache-free service.
( 18 )
$1,225.50
On Sale
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 75 )
$1,399.95
—
$1,449.95
$1,258.95
—
$1,303.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$1,199.95
$1,049.95
—
$1,199.95
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$1,799.95
$1,618.95
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 246 )
$1,171.99
On Sale
MBRP Pro Series exhaust systems are built for performance auto enthusiasts looking for a great quality exhaust. They're constructed from T304 stainless steel for optimal durability and reliability. Pro Series systems deliver a rich, mellow exhaust note and over 70 percent increased exhaust flow. They include the necessary pipe and muffler, and utilize OEM hangers for complete bolt-on cat-back (or downpipe-back) exhausts. These kits are available with polished stainless steel exhaust tips or carbon fiber exhaust tips for a beautifully finished look. These units are available in a variety of configurations for gas truck/SUV, diesel, and muscle car applications—so you can choose which design is best for your vehicle. MBRP offers a no-hassle lifetime warranty on Pro Series exhaust systems.
( 50 )
$1,294.99
—
$1,364.99
$1,035.99
—
$1,091.99
MagnaFlow Competition Series exhaust systems are designed for those seeking maximum performance, reduced mass, and an aggressive exhaust note that demands attention. They feature all mandrel-bent tubing and 409 stainless steel construction. These kits are available in numerous configurations, including cat-back and rear axle-back styles; single or dual mufflers; and one, two, or four outlets. Many tip options are offered, as well. MagnaFlow Competition Series exhausts increase your horsepower and torque for better results on the track, and they carry a lifetime construction warranty. (The systems may not comply with all local or federal noise requirements.) Order the sizes and setup tailored for fitment on your specific make and model.
( 28 )
$1,386.00
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 36 )
$1,075.79
—
$1,086.79
$1,035.79
—
$1,046.79
On Sale
Are you serious about "cool"? MBRP Pro series exhaust systems offer the coolest duals and the hottest singles for your muscle car. Pro series systems are constructed from T304 stainless steel and feature mirror-polished mufflers and tips for a lasting appearance and optimal durability. Crafted with smooth mandrel bends and high-flow mufflers, MBRP exhaust systems give your ride the sound, torque, and horsepower that every true muscle car should have. And, since MRBP shares your passion, they've created their systems to be installer-friendly with common hand tools for a bolt-on, no-weld, no-hassle installation! So, don't you think it's time to get serious? Add Pro series muscle car exhaust systems from MBRP--the makers of performance, sound, and style.
( 3 )
$1,494.99
$1,195.99
Clearance
Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.
( 286 )
$1,845.99
$1,142.50
—
$1,523.99
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 3 )
$1,412.25
—
$1,656.90
aFe Rebel Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Rebel Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation with most applications requiring no modifications. Rebel Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. Depending on the specific application, they are constructed of 304 or 409 stainless steel and include black or polished 304 stainless steel tips (intercooled for diesels) with a laser-cut stainless steel aFe power badge. Key features of aFe Rebel Series exhaust systems include: * Cat-back, axle-back, downpipe-back, and DPF-back systems * Many systems have dual tips that exit in front of the rear passenger side tire for a unique custom look * Aggressive or mild tone mufflers available (varies by model) * OE-style bayonet hangers stabilize pipe location * Bayonet tips hold hanger bushings in place for a durable fit * 360-degree sealing surfaces for leak-free performance * Select systems have high-temperature, metallic black coated mufflers for the ultimate in corrosion protection Note: Some aFe Rebel Series exhaust systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 7 )
$1,006.95
—
$1,242.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
