Availability
Showing In Stock Items. Show All 109 Items.
Reduce turbo lag while protecting other engine components and help to reduce underhood temperatures with Lava turbo heat shields from Heatshield Products. These custom-fit components use extreme-temperature materials to keep the heat on the hot side of the turbo where it belongs. Installation is a breeze since you don't have to trim or fit the heat shield blanket to fit your turbo housings. Heatshield Products Lava turbo heat shields' silica contact layer and silica insulation make the turbo shields capable of withstanding 1,800 degrees F continuously.
( 9 )
$161.99
—
$190.99
Heatshield Products Stealth turbo heat shields can increase boost, reduce turbo chatter or flutter, and help keep your turbo from lagging. By retaining heat inside the shields, your turbo not only becomes more efficient but your underhood temperatures also get reduced, lowering the intake temperatures, and adding power. Heatshield's low-profile black Stealth shields withstand up to 1,800 degrees F (continuous), and their custom design means that no trimming is needed, making installation a snap. Whether you're hardcore racing or in a street machine, heat kills performance—battle back against it with the Stealth turbo heat shields from Heatshield Products best suited for your application!
( 3 )
$185.99
—
$264.99
Funk Motorsports offers turbo heat shields for a wide range of (universal) applications, as well as vehicle-specific models for select BMW, Honda, Ford, and Subaru vehicles from 2002 and up. These turbo and/or turbo wastegate thermal blankets work to insulate the hot side and retain the heat within the exhaust gasses themselves. Hotter gasses accelerate faster, leading to them leaving the system sooner—improving spool up and throttle response. Insulating the turbo also helps to lower the amount of heat that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time. The 4-layer shields are offered in three finishes: titanium twill, carbon fiber twill, and inside out (for turbos in contact with a heat source). Additional details: * Inside-out blankets have internal material mirrored on the outside, as well * Available for a variety of turbocharger and wastegate styles * A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines, electronics, and even bodywork positioned close to the turbo from the dangers of excess heat * Funk shields feature specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. The new fireproof ultra-high temperature stainless steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1,300 degrees C * New, thicker internal heat lagging insulation provides up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities * ROHS tested and approved to ensure compliance and desired parameters * NOTE: Turbo blankets are not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regard to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsports takes no responsibility for fluid contamination their products.
( 1 )
$101.95
—
$263.67
Turbo-Guard carbon fiber turbo blankets feature dual ceramic layers for more heat reduction and are double-stitched for added durability. Ceramic protects up to 2,500 degrees F and insulates much more than fiberglass or cheaper materials used inside cheap blankets. Additional notes: * Faster spool times * Decrease turbo lag * Working temperature 2,300 to 2,800 degrees F * Titan turbo blankets: Fiberglass shell / dual layer ceramic core * Black blankets: Carbon fiber shell / dual layer ceramic core (weighs 10 percent less) * Models available for T3, T4, and T6 style turbochargers
Not Yet Reviewed
$109.99
—
$170.99
Turbo-Guard titanium turbo blankets feature dual ceramic layers for more heat reduction and are double-stitched for added durability. Ceramic protects up to 2,500 degrees F and insulates much more than fiberglass or cheaper materials used inside cheap blankets. Additional notes: * Faster spool times * Decrease turbo lag * Working temperature 2,300 to 2,800 degrees F * Titan turbo blankets: Fiberglass shell / dual layer ceramic core * Black blankets: Carbon fiber shell / dual layer ceramic core (weighs 10 percent less) * Models available for T3, T4, and T6 style turbochargers
Not Yet Reviewed
$109.99
—
$170.99
Heavy-duty downpipes for your heavy-duty truck! Flowmaster Chevy/GMC 6.5L truck turbo diesel downpipe kits feature thick-walled aluminized pipes, clamps/hangers, brackets, instructions, decals, and a warranty card all in one box.
( 14 )
$249.95
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$170.99
—
$269.99
Set your rig up with Dorman turbo up pipes for an upgrade that fits perfectly. Their turbocharger up pipes are direct replacements so your install will be convenient and the performance efficient. Dorman pipes are precision crafted with stainless steel tubular construction to protect against warping or cracking plus they are rigorously inspected and vehicle tested to ensure a trouble-free fit and performance. All include gaskets and may include bolts and nuts as necessary. You don't need a hassle to maintain the power of a leak-free flow; you just need the quality and value of Dorman turbo up pipes.
( 24 )
$133.50
—
$248.99
These performance turbo downpipes from BD Diesel allow better exhaust flow for your diesel. They feature aluminized steel construction, offering lower exhaust temperatures and improved fuel economy.
Not Yet Reviewed
$243.95
Mishimoto titanium turbo blankets help reduce the heat in your engine bay. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer and 96 percent silica fiber inner layer, Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Available in several sizes to fit popular turbochargers, titanium turbo blankets have an interior rating at 1,260 degrees C and can withstand up to 982 degrees C of direct exterior heat. Additional specs: * Rated to 1,800 degrees F direct heat and 2,000 degrees F radiant heat * Interior rated to max temperature of 2,300 degrees F * Available in T25/T28, T3, T4, and T6 sizes * Mishimoto Lifetime Warranty
Not Yet Reviewed
$141.95
—
$284.95
Optimize your diesel's performance with a non-restrictive aFe Atlas turbo downpipe. Engineered to outflow and outperform the restrictive OE down-pipe on your vehicle, they are designed with 3 in. mandrel-bent steel tubing offering smoother transition bends for low turbulence, increased airflow, and quicker turbo spool times. aFe Atlas turbo downpipes utilize factory mounting locations for true bolt-on performance and feature high-quality, OE-style V-band flanges for a complete 360-degree leak-free sealing surface. GM pipes are coated with a black finish and wrapped in high-temperature thermal header tape for better insulation, reducing EGTs and underhood temperatures.
Not Yet Reviewed
$168.00
—
$273.00
DEI ONYX Series turbo heat shields fit the popular smaller turbo sizes. They use an exclusive combination of premium heat-resistant textiles and newly designed stainless steel attachment anchors. DEI ONYX shields are used to maintain a more consistent temperature in your turbo, increasing efficiency and decreasing turbo lag. DEI ONYX Series turbo heat shields feature: * Strong riveted anchors to secure shield * Black carbon fiber look * Ultimate thermal barrier reduces turbo lag * Double reinforced seams inside and outside * Direct heat resistance up to 1,800 degrees F * Radiant heat resistance up to 2,500 degrees F
Not Yet Reviewed
$255.99
—
$264.99
Custom-fit DEI Titanium turbo shields provide the ultimate means of reducing turbo lag, while serving as superior heat barriers. They shield and protect engine components, hoods, and painted surfaces and offer a very cool carbon fiber look. Made from pulverized volcanic rock and then strained into a fiber material, Titanium turbo shields can withstand direct heat up to 1,800 degrees F and radiant heat up to 2,500 degrees F. This means retaining more heat in the turbine and less damaging underhood heat. The results are a cooler air intake temperature and a boost in horsepower! Stronger and more durable than other turbo blankets or shields, DEI Titanium turbo shields include high-temperature rated silica insulation padding under a tight outer layer for extra-added protection against extreme turbo-generated heat.
( 5 )
$185.99
—
$256.99
The bar has been raised! These DEI Titanium GEN-3 turbo shields are the most technologically advanced turbo shields ever. DEI has incorporated all of their experience to build the absolute best turbo shields on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, they developed the Titanium GEN-3 turbo shields. They feature a silicone coated TITANIUM LR outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shields available. DEI Titanium GEN-3 Turbo Shields feature: * Outer shell coated in silicone to insulate and hold up under extreme conditions, helps prevents fraying and encases seams to make them over 4 times stronger * Insulation layer, a thick layer of silica insulation keep heat in turbo shield and turbo housing, providing a low thermal conductivity making one of the best insulators * Inner layer, stainless steel, glass fiber and silicone adds to insulating and thermal properties, increases seam strength, durability and insulation value * Inner cover, stainless steel fabric holds up against the highest temps, will not break down or become brittle with heat * Direct heat resistance of 1,800 degrees F * Radiant heat resistance of 2,500 degrees F
Not Yet Reviewed
$263.99
DEI Ultra 47 turbo heat shields solve the problem of extreme underhood heat, stops heat damage of painted or carbon fiber hoods, and helps turbos spool faster. These custom-fit turbo blankets are constructed with a tri-layer mix of an aluminum impregnated glass fiber outer shell with a high-temperature insulating mat core and silica glass blend liner. Double stitching and heavy-duty capped anchor points make these heat shields look great and perform even better. Keeping the exhaust heat in the Turbo housing reduces turbo spool up time and exhaust gas velocity, resulting in more power quicker. The turbo heat shields are available to fit T-3 or T-4 sizes; sold individually or in kits. Additional specs: * Direct heat resistance of 1,350 degrees F * Radiant heat resistance of 1,800 degrees F * Kits will include shield, roll of black wrap, stainless steel locking ties, and roll of fastening wire
( 1 )
$129.99
—
$154.99
Thermo-Tec Rogue Series turbo covers provides an easy-fit design that keeps the turbine spooled up, reducing turbo lag. The covers feature dual layer construction to increase durability, reduce underhood temperatures, and improve horsepower, as well as performance by maintaining temperatures inside the turbo. Thermo-Tec Rogue covers include wiring for easy installation.
( 2 )
$188.91
—
$211.14
Flowmaster turbo diesel downpipe kits have a larger-than-stock diameter to increase airflow by up to 25 percent. Get more torque and horsepower from these easy to install upgraded downpipes from Flowmaster..
Not Yet Reviewed
$189.95
Bostech's turbocharger up pipes are machined to OE specifications, then rigorously inspected and vehicle-tested to ensure a trouble-free fit and performance. These steel exhaust up pipes include gaskets—and may include bolts and nuts, as necessary. Maintain the power of a leak-free flow with the quality and value of Bostech turbo up pipe replacements, available for a wide range of applications.
Not Yet Reviewed
$129.95
Thermo-Tec Rogue Series turbo cover kits provides an easy-fit design that keeps the turbine spooled up, reducing turbo lag. The covers feature dual layer construction to increase durability, reduce underhood temperatures, and improve horsepower, as well as performance by maintaining temperatures inside the turbo. Thermo-Tec Rogue turbo kits include cover, a 2 in. x 25 ft. roll of Rogue exhaust wrap, 18 in. snap straps, and 10 ft. of wire for easy installation.
( 1 )
$211.14
—
$255.59
Thermo-Tec turbo insulating kits were designed to protect, improve performance, and eliminate turbo lag on turbochargers. These complete kits will contain the heat produced by a turbo and fit a wide variety of turbines. These custom cut-to-fit kits come with an excessive amount of material to cover many turbos, from the smallest automotive to heavy-duty truck applications.
( 4 )
$105.99
—
$181.99
Pypes turbo direct pipes feature stainless steel construction for maximum flow capacity and durability. They're designed as a simple, bolt-on replacement for the restrictive factory downpipe on your rig and will help unleash your engine's beast in no time flat! Demonstrating both premium quality and craftsmanship, turbo direct pipes from Pypes will provide the ultimate in sound and performance for years to come. Please verify the fitment for your application when ordering.
( 1 )
$190.79
On Sale
COBB Tuning turbo blankets not only look cool under the hood of your vehicle, but they also offer multiple benefits that can be found on both sides of the blanket. Obviously, they help prevent the turbo from heat soaking neighboring components in the engine bay, but the real magic happens on the underside. With a turbo blanket installed, the turbo RPM acceleration improves, which leads to faster turbo spool and being able to achieve peak torque more quickly. This insulation also helps reduce heat-related wear, potentially improving the longevity of the turbocharger and other engine parts. Order the blanket designed for your make/model. Key features and benefits: * Turbo blankets are constructed with a fragmentized fire-retardant volcanic rock outer layer * Turbo blanket insulates the turbine housing, and act as a shield, preventing the high heat from the turbo from dissipating into the engine bay and damaging sensitive components like rubber and plastic hoses, wiring, and painted surfaces * Designed to limit the amount of heat that is transferred from your turbocharger to your engine bay, as well as keeping hotter exhaust gases that exit the system faster through decreased density * By limiting the amount of transferred heat can help extend the life of underhood components, decrease intake temps, and improve the response from your car
Not Yet Reviewed
$215.00
—
$250.00
$193.50
—
$225.00
MagnaFlow turbo downpipes feature stainless steel construction for maximum flow capacity and a T304 stainless steel flex joint for durability. They bolt to the bottom of the stock turbo housing and even retain the OEM oxygen sensor location. With their unique outlet design, these MagnaFlow turbo downpipes can bolt to the stock catalytic converter and can be fitted to virtually any aftermarket cat-back exhaust system.
( 2 )
$173.00
—
$205.00
Better than stock, Pacific Performance Engineering exhaust downpipes increase flow and performance on your Duramax. PPE crafts them with smooth bends from long-lasting 304 stainless steel. They include titanium exhaust wrap and clamps for a secure installation. Remove your crushed oval-shaped stock downpipe and replace it with a Pacific Performance exhaust downpipe for unrestricted power! Order the model recommended for your application.
( 26 )
$134.99
—
$170.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
