Availability
Showing In Stock Items. Show All 71 Items.
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 87 )
$14.99
—
$21.99
Summit Racing™ heat sleeving easily covers wires, cables, and lines to protect them from damaging radiant heat up to 1,500 degrees F. The lightweight sleeves are fireproof and oil-resistant. They're available in a variety of lengths and diameters, to attach via slip-on or Velcro®.
( 81 )
$12.99
—
$19.99
Wrap your lines and wires with DEI Cool Tape. It's 40 percent lighter and reflects 30 percent more heat than other tapes. It has a smooth finish and a strong adhesive backing.
( 37 )
$17.99
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$20.99
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 22 )
$16.99
—
$22.99
These Summit Racing™ starter heat shield wraps allow the user to insulate the starter and solenoid. The unique construction of the aluminized material provides protection by reflecting up to 90 percent of radiant heat.
( 7 )
$19.99
Thermo-Tec Seam Tape consists of a 2-layer, highly reflective foil with a special acrylic adhesive system. This flame-retardant tape is highly puncture-proof, tear-resistant, and features superior adhesion even under the most extreme conditions.
( 19 )
$21.48
Using Thermo-Tec Thermo-Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today's high-performance applications.
( 49 )
$16.16
—
$21.46
Summit Racing™ chemical-resistant heat sleeves easily slide over hoses and lines to keep them protected from damaging radiant heat. They are made from lightweight material that is resistant to fuel and oil. Summit Racing™ chemical-resistant heat sleeves are available in several diameters to cover all of your automotive needs.
( 9 )
$13.99
—
$21.99
Heatshield Products Lava Tube is thermal barrier sleeving that will protect your sensitive components. The specially formulated material is a fibrous thermal weave made from volcanic rock. The basalt fiber guards against continuous temperatures of 1,200 degrees F and intermittent temperatures of 2,000 degrees F. It is also extremely durable against abrasions and chemical exposure. Lava Tube features a high performance carbon fiber look and has been designed with a special Velcro® fastening system, allowing you to install it without removing, moving, or disassembling parts. It is available in four diameters ranging from 1/2 in. to 1 1/2 in., and in 3 ft. or 10 ft. long rolls. Reflect and dissipate heat away from your hoses, lines, wiring, and more with Heatshield Lava Tube sleeving.
( 32 )
$17.99
—
$19.99
Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires that you don't want to remove. It can also be wrapped around odd-shaped components for lasting heat protection. Wrap it around a fuel line and say goodbye to vapor lock. It reflects radiant heat up to 2,000 degrees F.
( 22 )
$22.48
Manufacturer Rebate
Design Engineering's short roll exhaust and header wrap is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers reduces underhood temperatures by up to 50 percent while providing additional horsepower, engine protection and passenger comfort. These header wraps use a hi-temp fiberglass composite material with a proprietary coating to enhance heat retention and expand durability.
( 19 )
$12.99
—
$19.99
Vibrant Performance ExtremeShield 1400 flexible reflective wrap is aluminized thermal wrap designed for easy installation on lines and hoses that can't be easily disassembled. To use, simply wrap pre-formed split tubing around the components and seal it with included high-temperature adhesive strip to provide protection from extreme temperatures (up to 1,400 degrees F). Now, that's truly impressive heat resistance protection at its best!
( 29 )
$15.29
—
$21.59
DEI has taken premier Titanium LR technology and transformed it into the best protection sleeves on the market. DEI Titanium Protect-A- Sleeves are capable of withstanding temperatures up to 1,800 degrees F direct heat and 2,500 degrees F radiant, shielding your wires, lines, and cables from damage. The sleeves are available in 4 ft. lengths. The 1/2 in. inside diameter will fit larger spark plug wires to protect them from hot exhaust manifolds and headers.
( 5 )
$19.99
DEI aluminized spark plug wire sheaths are made from the same material as DEI heat sheaths. They're designed as inexpensive protection for plug wire boots—or any spot on a plug wire that is close to heat and requires additional protection. These slip-on sheaths can also be used to cover lines, wires, and hoses that need protection in a specific area. The plug wire sheaths are 6 in. long x 3/4 in. diameter. Additional features and benefits: * Inexpensive protection for spark plug boots * Reflects radiant heat from headers and engine * Easy to install * Four per pack
( 46 )
$13.99
Vibrant Performance spark plug boot insulators offer high-temperature protection in an easy, slip-on braided fiberglass sleeve that prolongs the life of your expensive spark plugs. These slip-on insulation spark plug boot insulator sleeves require no clearance from the heat source. They're designed to protect up to 1,200 degrees F (650 degrees C) and available in natural or black in 3/4 in. diameters.
( 13 )
$19.29
Keep your plug wires properly protected from extreme underhood heat with Summit Racing™ spark plug boot heat shields. Our plug wire boot shields are inexpensive, extra protection from damaging heat-generating sources. Protect your plug wire boots and increase their lifetime. They offer an easy, snap-on installation.
( 6 )
$34.99
Bob Drake universal heat shields prevent high-temperature damage, minimize occurrences of vapor lock, and protect lines against the grime and ravages that accompany long hours of work and run time. Designed to wrap around heat exposed fuel lines, cables, and wires, they are made of high-temperature, heat-reflective fabric that is pliable enough to wrap around the tightest bends and corners without crimping the internal lines and cables. Bob Drake universal heat shields feature a convenient easy-on, easy-off design. With a strong Velcro® closure wrap, they eliminate the need to remove connection ends for installation or removal--simply wrap around the line or cable in need of protection and secure the Velcro® tight. Features: * Rated to 1,100 degree F (radiant heat) * Fits diameters up to 13/16 in. * 24 in. long, ready to trim to desired length * Includes ties for end closure * Not recommended for protection against direct heat
( 1 )
$16.99
DEI heat shield mounting kits are designed for ridged or semi-ridged heat shields. The universal bolt-on kits Include six 1/2 in. tall stainless standoffs with hardware.
Not Yet Reviewed
$19.99
Techflex Insultherm Tru-Fit sleeving is a braided fiberglass (FGL) sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200 degrees F may be encountered. Tru-Fit is used as primary insulation on low-voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible. Techflex Insultherm Tru-Fit sleeving provides a sturdy, long-lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.
( 6 )
$13.99
—
$25.79
Keep heat under control with Summit Racing™ muffler wrap kits. Available in several sizes to fit bullet and oval-style mufflers, our kits include aluminum muffler heat shield material, unpolished and dimpled, and mounting straps. For a cooler interior, reduce radiant heat from your muffler with Summit Racing™ muffler wrap kits.
( 11 )
$15.99
—
$21.99
Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees F, they fit most straight or 90-degree boots.
( 79 )
$21.99
Thermo-Tec Thermo-Flex aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides for abrasion resistance, thermal insulation, and the physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which creates sleeves that are flexible, lightweight, and strong. Install these sleeves on wires or hoses by slitting the material, rather than disconnecting the wire or hose ends. Thermo-Flex sleeves can withstand extreme temperatures of 750 degrees. Several sizes are available.
( 21 )
$16.48
—
$21.31
Manufacturer Rebate
DEI titanium exhaust wrap with LR technology is constructed from pulverized lava rock, extruded into fibers, and then woven into a tight weave, giving it titanium-like strength and toughness. The improvement in thermal protection helps to reduce underhood temperatures, resulting in cooler air intake for improved performance. And less heat in the engine bay means less chance of heat soak conditions on vital underhood components. Typical glass fiber wrap is rated at handling 1,200 degrees F of maximum direct heat, while DEI's titanium wrap, using LR technology, is capable of handling direct continuous heat up to 1,800 degrees F and radiant heat up to 2,800 degrees F. And because it's pliable, there's no need to wet the wrap when wrapping headers or pipes, as many do in order to make the wrapping process easier to manage and to get a tight wrap. Titanium wrap will not shrink, and because of its material structure, it is more resistant to temperature and vibration breakdown, abrasions, chemical and hot oil spills than glass fiber wrap. Plus, DEI titanium wrap offers a very cool carbon fiber look as an added feature!
( 251 )
$15.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
