Availability
That clunking sound you hear beneath your vehicle might be due to a broken exhaust hanger causing your exhaust system to bounce around. If that's the case, don't sweat it—just swap out the bad exhaust hanger with a new one from Summit Racing™. These replacement hangers are available in a variety of materials and styles to best facilitate your repair. Keep your exhaust system securely positioned and attached where it belongs, with quality hangers from Summit Racing™.
( 43 )
$8.99
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 186 )
$155.96
—
$469.00
Walker insulators are high-quality replacements made to work seamlessly with Walker aftermarket replacement parts. These exhaust insulators are manufactured from premium materials and are available in various applications.
( 74 )
$6.99
Got an exhaust job? Finish it like a pro with Walker U-bolt clamps. They are manufactured from premium steel for greater strength and durability. They are offered in standard and flat strap styles as well as heavy-duty with or without welded saddles. No matter which style of Walker U-bolt clamps you need, they are all designed for one purpose--to clamp your exhaust together with leak-free performance!
( 96 )
$2.99
On Sale
Silence interior drone with Flowmaster dBX mufflers. These mufflers utilize cutting-edge technology to provide maximum performance and ultimate sound quality. dBX mufflers have a patented core design that delivers exhaust efficiency with much less noise inside of your ride. These Flowmaster mufflers feature 409S stainless steel internal components covered in a 304 stainless steel case--a great look for your next exhaust project! Keep the peace inside--add performance to your ride with dBX mufflers from Flowmaster.
( 28 )
$239.95
AP Exhaust offers replacement exhaust hanger insulators for countless applications from the 1970s and up. Crafted from durable rubber, these parts secure and support the exhaust pipe to the vehicle's chassis. They're designed to isolate and dampen vibrations and noise generated by the exhaust system, preventing excessive movement and rattling—and ensuring that the exhaust system is quiet and doesn't damage surrounding components. Order the size recommended for your car or truck.
( 10 )
$5.99
AP Exhaust Tips should be the finishing touch on your aftermarket performance exhaust systems. They are carefully designed with key attention to detail and are manufactured to the strictest standards from high-grade stainless or aluminized steel with a bright chrome finish. For decades, AP Exhaust Technologies has engineered and manufactured a wide range of automotive exhaust and emission systems and components.
( 63 )
$23.99
—
$44.99
AP Exhaust universal catalytic converters will work to make your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering comprehensive coverage, AP Exhaust can provide universal catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust universal catalytic converters offer the quality, fit, and value to meet those concerns.
( 6 )
$109.99
—
$581.99
AP Exhaust provides a comprehensive offering of exhaust accessories, including manifold shoulder bolt and spring kits that can be used as time-saving solutions for manifold repair. Each kit is designed to be a direct replacement for rusted or damaged exhaust bolts and springs on specific year/make/model applications, thus ensuring an exact fit every time.
( 12 )
$7.99
—
$9.99
Walker resonators can provide your existing exhaust system with some additional sound control. These "mini muffler" units are often positioned and tuned to complement the style of vehicle--sports car or luxury sedan, for instance. The resonators are made from quality materials and can be easily installed inline with any exhaust system. Choose the model that best matches your vehicle specs.
( 142 )
$63.99
Dorman direct-fit catalytic converters will help you get your car running in original form again. Over time, a catalytic converter can become clogged with carbon buildup and prevent your car from peak performance; it can even cause serious damage and emissions test failure. Dorman replacements are direct bolt-ins and are designed to be identical to your original converter, ensuring an easy installation. Order the model designed for fitment on your make/model vehicle.
( 2 )
$436.99
Dorman exhaust manifold mounting hardware is designed to replace broken, stripped, or corroded stock fasteners. The studs, bolts, and nuts are manufactured from quality materials and offered in a variety of finishes. Dozens of options are available; choose the lengths and thread sizes needed for your specific vehicle application. Pieces are sold individually, in pairs, or larger quantity sets. A secure exhaust manifold begins with Dorman mounting hardware.
( 284 )
$5.99
—
$10.99
Walker exhaust manifold hardware kits include a variety of components and are designed to work with Walker aftermarket parts on hundreds of vehicles dating as far back as the mid-70s. The pieces are manufactured from durable materials to ensure tight, leak-free connections. Beneath your chassis, Walker heavy-duty hardware helps to provide years of trouble-free performance.
( 15 )
$12.99
Walker Quiet-Flow SS mufflers are designed using factory-style cross-sections for a precision fit and OE sound. Their sophisticated internal routing provides superior flow and performance. You can choose from several internal construction options, including baffled, louvered tube (with or without packing), and turbo-style. These exhausts are also available in dozens of sizes and inlet/outlet choices. Walker Quiet-Flow SS mufflers construction makes them the ultimate replacement for durability and good looks!
( 337 )
$179.99
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 31 )
$461.99
—
$913.99
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 243 )
$554.99
—
$672.99
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 422 )
$354.00
—
$1,280.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit manifold catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 2 )
$1,261.00
Injen Technology's Super SES exhaust systems are dyno-tuned to complement their performance intake systems. In doing so, the Super SES systems provide maximum horsepower and torque across the power band. The Super SES exhaust systems are manufactured from 100 percent 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC-machined flanges, and robotic TIG welding. They also feature a straight-through muffler and Injen's unique flared tip design.
( 3 )
$564.91
—
$659.07
BRExhaust direct-fit exhaust hanger insulators are high-quality replacements for original equipment hangers—designed to fit right the first time. They're manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system. Order the model designed for your application needs.
Not Yet Reviewed
$12.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. Each resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. BRExhaust direct-fit exhaust resonators feature lightweight aluminized steel construction and are available in many diameters and lengths. Choose the resonator designed for your vehicle.
( 1 )
$136.99
BRExhaust direct-fit muffler assemblies are constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. Built from 16-gauge steel tubing and fully aluminized, each assembly is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Available in different configurations compatible with import or domestic vehicles, choose the one designed for your vehicle.
( 2 )
$376.00
BRExhaust offers zinc plated steel U-bolt type clamps to secure your exhaust pipes. The clamps are available for pipe diameters ranging from 2 to 3 in. To ensure a gas-tight connection and secure suspension, BRExhaust recommends replacing mounting parts when fitting a new exhaust. Order the size and quantity needed for your application.
Not Yet Reviewed
$7.99
—
$28.99
Catco prides itself on leading the industry in new product development and efficient manufacturing processes for its EPA- and CARB-compliant catalytic converters. Aristo's proprietary substrate chemistry yields highly efficient loadings for lower cost and better converter efficiency while Catco's latest advanced-manufacturing technology ensures that all converters are built to exact OE dimensions and fitment. All this allows Catco to maintain industry-leading efficiency, productivity, and competitive pricing. Catco Federal/EPA direct-fit catalytic converters feature: * 409 stainless steel shell and neck construction for longer life * Aristo Clean by Design advanced catalyst technology to handle the toughest emissions problems * Increased precious metals loadings * Improved O2 storage and release * Exact O2 sensor location(s) * Lower emissions output * Long-term reliability * Keeps the MIL light off * Hardware included (where needed) * Provides for faster and easier installations * 5-year/50,000-mile warranty on converter body * 25,000-mile warranty on emissions
( 7 )
$343.99
—
$706.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
